Eti 53303161 Operating instructions

Eti
Brand
Eti
Model
53303161
Type
Operating instructions

This manual is also suitable for

Eti 53303161-4PK is a highly functional LED 18in Wall Pack designed for both indoor and outdoor use. With its durable construction and weather-resistant design, it's perfect for illuminating pathways, entrances, and other areas around your home or business. Installation is simple, thanks to the included mounting screws and hardware. This wall pack features a powerful LED light source that provides bright, energy-efficient illumination. It's also compatible with photocells for added convenience and security.

Eti 53303161-4PK is a highly functional LED 18in Wall Pack designed for both indoor and outdoor use. With its durable construction and weather-resistant design, it's perfect for illuminating pathways, entrances, and other areas around your home or business. Installation is simple, thanks to the included mounting screws and hardware. This wall pack features a powerful LED light source that provides bright, energy-efficient illumination. It's also compatible with photocells for added convenience and security.

Item # 53303161
LED 18IN WALL PACK
USE AND CARE GUIDE
Installation Instruction.................................................................4
Installation Instruction (continued).............................................5
Maintenance Instruction..............................................................6
Environmental requirement.........................................................6
Product carried standard.............................................................6
Care and Cleaning........................................................................6
Troubleshooting...........................................................................6
Table of Contents
Table of Contents.....................................................................2
Safety Information...................................................................2
Limited Warranty.....................................................................2
Pre-Installation.........................................................................3
Tools Required........................................................................3
Package Contents...................................................................3
Hardware Included..................................................................3
can be wall mount only.
75
3
PACKAGE CONTENTS
Part Description Quantity
A
LED 18in Wall Pack
1
A
AA
Mounting Screw (short)
Screw stud
4
3
3
4
1
BB
CC
DD
EE
Mounting Screw (long)
Wire Connector
Water joint
AA
BB
CC
DD
EE
hammer
Silicone sealant
4
Installation Instruction
1
Turn off the power before installation
2
Remove the upper cover from fixture
by dismounting 2 screws
3
Please drill 3 holes on the wall,
correspond A, B, C position on the
base plate
4
14.76’’
6.42’’
BB
1.38’’
Ø7
Drill the holes on the base plate,
according to A, B, C position
3-Ø6
A
B
C
14.76’’
6.42’’
A
B
C
Installation Instruction (continued)
5
5
6
7 Connect the cables according to
drawing. Hang the upper cover over
the base plate, connect the driver
output and optic input with fast
connector.
8
Install the base plate on the wall by
fixing 3 screws
CC
Put the cables from the wall through the
conduit entry point, seal any gaps around
the conduit entry point.
L
N
L
N
DD
Put back the upper cover on the base
plate and fixing two screws
This wall pack is compatible for photocell,
and pls contact ETI for separate purchase, the ETI
brand’s model number is PE-MV-01. Below is the
wire diagram for your reference.
L
N
L
N
White
Black
LOAD
Red
•
•
•
SWITCH
6
4.1 Do Not use volatile solvent such as alcohol to clean the troffer.
4.2 Use soft cotton cloth with suds to clean the troffer .
4.3 Non-professional Do not attempt to take apart and repair the troffer .
4.4 Please use the constant-current driver exclusively adaptive to the troffer, do not change the driver without permission .
UL1598
Maintenance instruction
Environment requirement
Product carried standard
Operating temperature: -40 °F~113 °F.
2017.07.19
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

Eti 53303161 Operating instructions

Eti
Brand
Eti
Model
53303161
Type
Operating instructions
This manual is also suitable for

Eti 53303161-4PK is a highly functional LED 18in Wall Pack designed for both indoor and outdoor use. With its durable construction and weather-resistant design, it's perfect for illuminating pathways, entrances, and other areas around your home or business. Installation is simple, thanks to the included mounting screws and hardware. This wall pack features a powerful LED light source that provides bright, energy-efficient illumination. It's also compatible with photocells for added convenience and security.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents