STYLE#: 21953
Careful unpack all lamp parts from the carton.
1. Take the lamp carefully out of the Carton,and place it on a flat surface.
2. Be sure the power to the installation point is power off.
4. Move the metal cap upward to allow space for Glass Ball. (Picture 2)
5. Slide the Glass Ball to allow the Clips fit into the Glass. (Picture 3)
7. Put the Metal Cap downward to touch with the Glass top. (Picture 5)
8. Turn the inner threaded turning clockwise until tightened (Picture 6)
9. Now you can enjoy your beautiful fixture.
10.Install bulbs (not included).See label located at socket area
for type and maximum allowed wattage.
3. Turn the inner threaded turning counter-clockwise and move the
6. Rotate the Glass Ball to allow the Clips from other end fit
ASSEMBLY INSTRUCTIONS
the glass.(Picture 4)
coupling upward. (Picture 1)
/
