STYLE#: 21918
Careful unpack all lamp parts from the carton.
1. Take the lamp carefully out of the Carton,and place it on a flat surface.
2. Be sure the power to the installation point is power off.
4. Move the metal cap upward to allow space for glass ball. (Picture 2)
5. Slide the Glass Ball to allow the clips fit into the glass. (Picture 3)
7. Put the metal cap downward to touch with the glass top. (Picture 5)
8. Turn the inner threaded turning clockwise until tightened (Picture 6)
9. Swing the fixture body ring to reach with evenly gapped. (Picture 7)
10. Now you can enjoy your beautiful fixture. (Picture 8)
Hex
Picture1
Picture
3
Picture 4
ASSEMBLY INSTRUCTIONS
3. Turn the inner-threaded turning counter-clockwise and move the
coupling upward. (Picture 1)
6. Rotate the Glass Ball to allow the clip from other end fit
into the glass. (Picture 4)
Coupling
Inner threated turning
Metal Cap
Socket
Fixture body ring
Picture 1
Metal Cap
Clips
Glass ball
Picture 6
Picture 7
Picture 8
Picture 2
Picture 5
Metal Cap
Metal Cap
Glass Ball
Metal Cap
Fixture Boby ring
Style #21918
Fixture
body ring
Picture 3
Finial
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
bObsweep SW603002 User manual
-
-
-
-
-
Hunter Stewart Installation guide
-
Hunter Fan 28711 Owner's manual
-
Casablanca Heritage II C19xxxK Owner's manual
-
-
