2. Ideal
  3. 31-315

Ideal 31-315 Specification

  • Hello! I am an AI chatbot trained to assist you with the Ideal 31-315 Specification. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Reduces installation time
and saves money on
premise jobs
Thread, measure and
pull with single product
Imprinted with sequential
footage or meter
markings
Fewer installation steps,
significant material and
labor savings
3-in-1 Premise MULETAPE
®
IDEAL INDUSTRIES, INC.
Becker Place, Sycamore, IL 60178, USA / 815-895-5181 • 800-435-0705 in USA
International offices:
Australia • Brazil • Canada • China • Germany • Mexico • UK
For complete sales office contact information, visit us at:
www.idealindustries.com
Form No. P-5027
10/10
3 - 1 Premise MULETAPE
®
The NEW 3 - 1 Premise MULETAPE
®
cuts pulling and
installation time on premise jobs. It allows you to thread,
measure and pull with a single, super-strong product. No
need for proong with poly line or pulling with string/rope
combinations. And, because it is imprinted with sequential
footage or meter markings, there is no need to go back and
manually calculate length of cable you will need.
That means fewer steps in the installation process,
signicant material and labor cost savings and fewer
products shipped to the job site.
n Eliminates potential for duct cutting
n Lower elongation reduces snap-back and enhances
worker safety
n Reduces tension at the start of a pull
n Imprinted with footage or meter marking
n Reduces material, inventory and freight costs
n Pulling strength – 400 lbs. to 1800 lbs.
n Patent pending
Cuts Pulling & Installation Time!
©2010 IDEAL INDUSTRIES, INC.
Printed
in U.S.A.
Description Pulling Strength Length
Cat. No.
3-in-1 Premise MULETAPE
®
400 lb. 4,500 ft./bucket
31-314
3-in-1 Premise MULETAPE
®
1,800 lb. 1,300 ft./bucket
31-315
MULETAPE
®
is a registered trademark of NEPTCO.
/