Acrosser Technology AIV-Q170V1FL Owner's manual

Brand: Acrosser Technology

Model: AIV-Q170V1FL

Type: Owner's manual

AIV-Q170V1FL User Manual

User Manual

Acrosser Technology Co., Ltd.

www.acrosser.com

AIV-Q170V1FLS

AIV-Q170V1FLS-

OBD

AIV-Q170V1FL

AIV-Q170V1FL-

OBD

Fanless In-Vehicle System

Skylake S+TE Ver CPU

AIV-Q170V1FL User Manual

Acrosser Technology Co., Ltd.

To read this User Manual on your smart phone, you will have to install an

APP that can read PDF le format rst. Please nd the APP you prefer from

the APP Market.

Ver: 100-002

Date: Jun. 28, 2019

Disclaimer

For the purpose of improving reliability, design and function, the information in this document

is subject to change without prior notice and does not represent a commitment on the part of

Acrosser Technology Co., Ltd.

In no event will Acrosser Technology Co., Ltd. be liable for direct, indirect, special, incidental, or

consequential damages arising out of the use or inability to use the product or documentation,

even if advised of the possibility of such damages.

This document contains proprietary information protected by copyright. All rights are reserved.

No part of this manual may be reproduced by any mechanical, electronic, or other means in

any form without prior written permission of Acrosser Technology Co., Ltd.

Trademarks

The product names appear in this manual are for identication purpose only. The trademarks

and product names or brand names appear in this manual are the property of their respective

owners.

Purpose

This document is intended to provide the information about the features and use of the product.

Audience

The intended audiences are technical personnel, not for general audiences.

AIV-Q170V1FL User Manual

3www.acrosser.com

Table of Contents

1. System Introduction ...................................................................... 5

1.1. Introduction ................................................................................................................. 5

1.2. Specications ............................................................................................................. 5

1.3. Package Contents ...................................................................................................... 8

1.4. System Dissection ...................................................................................................... 9

1.4.1. Dimensions ..................................................................................................... 9

1.4.2. Front I/O Panel .............................................................................................. 10

1.4.3. Rear I/O Panel .............................................................................................. 14

2. Components Assembly ............................................................... 16

2.1. HDMI Cable Connection ........................................................................................... 16

2.2. 2.5” SATA SSD Installation ....................................................................................... 20

2.3. CFast/SIM Card Installation...................................................................................... 21

2.4. Antenna Connection ................................................................................................. 24

2.5. Memory Card Installation.......................................................................................... 25

3. BIOS Settings ............................................................................... 29

3.1. Main Setup ............................................................................................................... 29

3.2. Advanced Setup ....................................................................................................... 30

3.3. Chipset Setup ........................................................................................................... 31

3.4. Security Setup .......................................................................................................... 32

3.5. Boot Setup ................................................................................................................ 32

3.6. Save & Exit Setup..................................................................................................... 33

4. Driver and Utility Installation ...................................................... 34

4.1. Driver CD Interface Introduction ............................................................................... 34

4.2. Windows Installation ................................................................................................. 35

4.2.1. Driver Installation Page ................................................................................. 36

4.2.2. Utility Page .................................................................................................... 38

4.2.3. Application Installation Page ......................................................................... 44

4.2.4. Document Page ............................................................................................ 46

4.3. Linux Conguration................................................................................................... 47

5. Software Installation and Programming Guide ........................ 54

5.1. Introduction ............................................................................................................... 54

5.1.1. Environment .................................................................................................. 54

5.1.2. CAN Bus ....................................................................................................... 54

5.1.2.1. Overview ........................................................................................ 54

5.1.2.2. CAN Message Format .................................................................... 54

AIV-Q170V1FL User Manual

Acrosser Technology Co., Ltd.

5.1.3. GPIO and Watchdog ..................................................................................... 56

5.1.3.1. Overview ........................................................................................ 56

5.1.4. Power Subsystem ......................................................................................... 56

5.1.4.1. Overview ........................................................................................ 56

5.2. API List and Descriptions ......................................................................................... 57

5.2.1. CAN Bus ....................................................................................................... 57

5.2.2. GPIO and Watchdog ..................................................................................... 65

5.2.2.1. GPIO .............................................................................................. 65

5.2.2.2. Watchdog ....................................................................................... 66

5.2.3. Power Subsystem ......................................................................................... 66

5.2.4. J1939(STN1110) ........................................................................................... 72

5.3. Appendix A................................................................................................................ 81

6. FAQ ............................................................................................... 82

Q 1. Where is the serial number located on my system? ................................................. 82

AIV-Q170V1FL User Manual

5www.acrosser.com

1. System Introduction

1.1. Introduction

This is the latest in-vehicle computer of Acrosser Technology. Equipped with

generation 6 Intel Skylake-Core i series CPU, fanless design, and rich I/O ports, this

brand new AIV-Q170V1FL meets your various requirements, perfect for all kinds

of telematics solutions & eet management, no matter in tracking application or

management application.

1.2. Specifications

System

CPU • Intel

Skylake-S 6

Gen Core

i7-6700 TE

• Intel

Skylake-S 6

Gen Core

i5-6500 TE

• Intel

Skylake-S 6

Gen Core™ i3-6100 TE

• Intel

Skylake-S 6

Gen Pentium

G4400 TE

Chipset • Intel

Q170

Memory • 2x DDR4 SO-DIMM- 2133 (Up to 32GB/non-ECC)

Display

Graphic Controller • Intel

HD Graphics 530 (i3/i5/i7)

• Intel

HD Graphics 510 (Celeron/Pentium)

Video Interface • 1x HDMI (with locking bracket)

• 1x VGA

• 1x DVI-D

Storage

SATA • 2x SATA 3 Connectors (Sata 3 signal)

• 2x Power Connectors (JST 2.54mm, 1x4 pin)

Disk Bay • 2x Swappable 2.5” HDD Bay (with Anti-vibration)

CFast • 1x CFast Socket

Communication and I/O

Ethernet • 2x GbE Copper (RJ45)+ 4x GbE Copper (RJ45)

• Intel i210 IT chip

I2C • I2C Pin Header

AIV-Q170V1FL User Manual

Acrosser Technology Co., Ltd.

G Sensor • 1x G Sensor board connect to I2C Pin Header

(3-axis accelerometer)

USB • 8x External Connectors for USB 3.0

Serial Port • 4x COM --> DB9 (RS232/422/485)

CANBUS • Use CAN/OBD II DB9 connection

1. Support CAN Bus 2.0B protocol

2. J1939 protocol (Colay with STN1110 IC)(Option)

3. Programmable baud rate:

Unsigned Char Baud Rate

1 10K

2 20K

3 50K

4 100K

5 125K

6 250K

7 500K

8 800K

9 1000K

4. API library for user development

5. CAN bus device status query

CAN/OBD II • Colay STN1110 with CAN BUS

GPIO • GPIO 4-in / 4-out, DB15 male

• Digital Input

Input Channels: DI x 4

Input Voltage: 0 to 28 VDC

Digital Input Levels for Dry Contacts:

• Logic level 0: Close to GND

• Logic level 1: Open

Digital Input Levels for Wet Contacts:

• Logic level 0: +3 V max.

• Logic level 1: +10 V to +30 V (COM to DI)

Isolation: 2 kV optical isolation

• Digital Output

Output Sink to ground current: maximum 50mA per

channel

Output Channels: DO x 4, sink type

On-State Voltage: 24 VDC nominal, open collector to

30 V

POE • 4x PoE (PD mode, 802.3 af compliant) Via PoE LAN1~4

SIM • 2x SIM card socket

LED • 1x3 LED for power & status (onboard)

AIV-Q170V1FL User Manual

7www.acrosser.com

Expansion

Mini PCIe Slot 3x Mini PCI-e socket

• Mini PCI-e 1 for 4G& GPS(PCI-e+USB signal )(Full size)

S Model Mini PCI-e 1:USB + USB 3.0 signal(By BIOS)

• Mini-PCI-e 2 for Wi-Fi + BT(PCI-e+USB signal )(Half

size)

• Mini-PCI-e 3 for reserved(PCI-e+USB signal ) (Full size)

S Model Mini PCI-e 3:USB + USB 3.0 signal(By BIOS)

Other Features

Audio • 2x 3.5” Phone Jack:

Pink: MIC in

Green: Audio out

Remote Switch • 1x 3.5” Phone Jack (Blue)

CMOS • RTC (+/- 2 seconds for 24hours)

• Lithium Battery (3V) for CMOS data backup

Hardware Monitoring • CPU Voltage

• CPU and System Temperature

Watchdog Timer • Software Programmable 0~255 Seconds, 0= disable

timer.

Antenna

Antenna type • 2x 2.4G External Antenna for TX/RX, Diversity (For WiFi

& BT)

• 1x 4G/LTE U.FL Antenna (Diversity, MIMO)

• 1x GPS /Glonass Antenna U.FL Antenna

Power Requirement

Power Supply • 9V ~ 36V Power Input

• 12V for System, 54V for POE function

Software

OS Support • Windows 10 (64 bit)

• Linux Kernel 4.4 or above (64 bit)

AIV-Q170V1FL User Manual

Acrosser Technology Co., Ltd.

Mechanical & Environment

Thermal Design • Fanless (Heatsink)

Chassis • Aluminum extrusion heat sink & metal chassis (Silver

printing color with Acrosser Logo)

Dimension • 290mm (W) x 190mm(D) x 59.7mm(H)

Vibration • IEC 60068-2-64, 5~500Hz, 3GRMS (CFast/SSD)

Shock • IEC 60068-2-27, 50G 500m/s2 11MS

Operating Temperature • -25°C ~ 60°C

• -25°C ~ 55°C (+15°C) follow EN50155 T1

Storage Temperature • -40°C ~ 80°C

Humidity • 0 ~ 90%

Certication • CE / FCC Class B / E Mark

1.3. Package Contents

Check if the following items are included in the package.

Item Q’ty

�

AIV-Q170V1FL System 1

�

Remote Switch Cable 1

�

Driver CD 1

�

Screw Pack (For 2.5” HDD bracket: 8pcs) 1

�

Terminal Block (Female 3-pin) 1

�

Spare Fuse 1

�

HDMI Locking Bracket 1

�

GPIO Cable 1

AIV-Q170V1FL User Manual

9www.acrosser.com

1.4. System Dissection

1.4.1. Dimensions

(Unit: mm)

290

190

59.7

AIV-Q170V1FL User Manual

Acrosser Technology Co., Ltd.

1.4.2. Front I/O Panel

POWERPoE

LAN3

LED2

DVI HDMI

USB3

USB4

USB1

USB2

Remote

Switch VGA

MIC

Speaker

FUSE

LED1

PoE

LAN1

PoE

LAN2

PoE

LAN4

COM3

LAN6LAN5 COM4

POWER 9V ~ 36V DC Jack

Pin # Signal

V+ 9V ~ 36V

IGN IGN_ON

V- GND

LED1 Status/HDD/Power LED Indicator

LED Light Display

G Green Status

G Green SATA Device Activity

Y Yellow Power LED

LED2 PoE LAN Power LED Indicator

LED Light Display

G Green PoE LAN4 POWER

G Green PoE LAN3 POWER

G Green PoE LAN2 POWER

G Green PoE LAN1 POWER

USB1 ~ USB4 USB 3.0 Connector

Pin # Signal Pin # Signal

1 VCC5 5 SS_RX -

2 DATA- 6 SS_RX +

3 DATA+ 7 GND

4 GND 8 SS_TX -

9 SS_TX +

AIV-Q170V1FL User Manual

11www.acrosser.com

LAN1 ~ LAN6 RJ-45 GbE Port

LED Light Status

LED1

Off 10Mbps or No Link

Green 100Mbps

Orange 1000Mbps

Blink NA

LED2

Yellow Link

Blink Link with Activity

Off No Link

HDMI HDMI Connector

Pin # Signal Pin # Signal

1 DATA2+ 2 GND

3 DATA2- 4 DATA1+

5 GND 6 DATA1-

7 DATA0+ 8 GND

9 DATA0- 10 CAN_L

11 GND 12

13 NC 14 NC

15 DDCCL 16 DDCDA

17 GND 18 +5V

19 HPD

VGA VGA Connector

Pin # Signal Pin # Signal

1 VGA_RED 2 VGA_GREEN

3 VGA_BLUE 4 NC

5 GND 6 GND

7 NC 8 GND

9 VCC5 10 GND

11 NC 12 VGA_SDA

13 VGA_HSYNC 14 VGA_VSYNC

15 VGA_SCL

AIV-Q170V1FL User Manual

Acrosser Technology Co., Ltd.

DVI DVI Connector

Pin # Signal Pin # Signal

C1 NC C2 NC

C3 NC C4 NC

D1 DATA2- D2 DATA2+

D3 GND D4 NC

D5 NC D6 DDCCLK -

D7 DDCDATA D8 NC

D9 DATA1- D10 DATA1+

D11 GND D12 NC

D13 NC D14 VCC5

D15 GND D16 DVI_HPD

D17 DATA0- D18 DATA0+

D19 GND D20 NC

D21 NC D22 GND

D23 CLK+ D24 CLK-

AUDIO1

Jack Function

Remote Switch

(Blue)

Remote Switch Input

Speaker

(Green)

Line Out

MIC (Pink) Microphone Input

COM3, COM4

Pin #

RS-232

Signal

RS-422

Signal

RS-485

Signal

1 DCD TX- DATA-

2 SIN TX+ DATA+

3 SOUT RX+

4 DTR RX-

5 GND GND GND

6 DSR

7 RTS

8 CTS

9 RI

AIV-Q170V1FL User Manual

13www.acrosser.com

Blade-type Fuse Holder

Power-input fuse suggestion:

Output: 12V/100W (Input: 9V~32V/111W, Efciency: 90%)

Car Battery Blade-type fuse suggestion Remarks

12V System CONQUER ATQ-10

Voltage Rating: 32V;

Current Rating: 10A

24V System CONQUER ATQ-5

Voltage Rating: 32V;

Current Rating: 5A

Note: You may have to use a needle-nose pliers to grip on the fuse and pull it out.

AIV-Q170V1FL User Manual

Acrosser Technology Co., Ltd.

1.4.3. Rear I/O Panel

COM1GPIO1 COM2 ANT 1 ~ 4

CAN

OBD II

USB7

USB8

USB5

USB6

CFast

SIM1 SIM2

COM1, COM2

Pin #

RS-232

Signal

RS-422

Signal

RS-485

Signal

1 DCD TX- DATA-

2 SIN TX+ DATA+

3 SOUT RX+

4 DTR RX-

5 GND GND GND

6 DSR

7 RTS

8 CTS

9 RI

GPIO1 GPIO Function

Pin # Signal Pin # Signal

1 GPO0 2 GPO1

3 GPO2 4 GPO3

5 GND 6 GND

7 N/A 8 N/A

9 GND 10 N/A

11 GPI4 12 GPI5

13 GPI6 14 GPI7

15 EXTPWR

USB5 ~ USB8 USB 3.0 Connector

SIM1, SIM2 SIM Card Holder

CFast CFast Card Socket

AIV-Q170V1FL User Manual

15www.acrosser.com

ANT 1 ~ 4 Reserved for installation of 4x optional SMA-type antenna

CAN, OBD II

Pin #

AIV-Q170V1FL

CAN Bus Pin Out

AIV-Q170V1FL-

OBD

OBD II Pin Out

1 Signal Ground

2 Chassis Ground

3 Can High Can High

4 ISO9142-2 K Line

5 Can Low Can Low

6 J1850 Bus-

7 J1850 Bus+

8 ISO9142-2 L Line

9 Battery Power

AIV-Q170V1FL User Manual

Acrosser Technology Co., Ltd.

2. Components Assembly

2.1. HDMI Cable Connection

You can nd in the package an HDMI locking-bracket set. This gaget is designed to

secure your HDMI cable connection.

Step 1: As shown below, insert the locking-bracket by aligning its hooks with holes

on the chassis.

AIV-Q170V1FL User Manual

17www.acrosser.com

Step 2: Lock the HDMI locking-bracket with the two black screws that came with

the package.

Step 3: Plug your HDMI cable head into the HDMI socket. Firmly push the HDMI

cable all the way into the socket.

AIV-Q170V1FL User Manual

Acrosser Technology Co., Ltd.

Step 4: Fasten the HDMI cable-end with a cable-holder. Lock the cable-end to

the bracket with this cable-holder by two white screws that came with the

package. (There are two types of cable-holder provided: 4mm and 7mm.

Use the type 4mm for HDMI cable of thinner than 6mm in diameter. Use

the type 7mm for HDMI cable of thicker than 6mm in diameter.)

Step 5: Choose the holes that allows the screw to lock the cable-end with cable-

holder.

AIV-Q170V1FL User Manual

19www.acrosser.com

Step 6: Fasten the cable-end with cable-holder. The HDMI locking-bracket is now

held into position tightly.

AIV-Q170V1FL User Manual

Acrosser Technology Co., Ltd.

2.2. 2.5” SATA SSD Installation

Step 1: Loosen the four disk-tray screws by ngers. Pull out the two disk-trays.

Step 2: Install your 2.5” SATA disk. Lock the disk with 4 screws provided in the

package.

Step 3: Firmly push the disk-tray back into the disk compartment. The disk is now

connected with the mainboard. Lock the four disk-tray screws by ngers.

Page is loading ...

Acrosser Technology AIV-Q170V1FL Owner's manual

Brand: Acrosser Technology

Model: AIV-Q170V1FL

Type: Owner's manual

Download PDF

report

Acrosser Technology AIV-Q170V1FL Owner's manual

Acrosser Technology AIV-Q170V1FL Owner's manual

Related papers

Other documents