8.000
203.2
1/4"-20x3" FPHM THRU BOLT
1/4"-20x3" FPHM THRU BOLT
1/4"-20x3" FPHM THRU BOLT
1/4"-20x3" FPHM THRU BOLT
1/4"-20x2-1/4" FPHM THRU BOLT
1/4"-20x2-1/4" FPHM THRU BOLT
10-24X1/2" FPHM X16
USE 1/4-20X2-1/4" SCREWS TO MOUNT VERTICAL PULL BAR TO HORIZONTAL PULL BARS
USE PUSH BARS AS TEMPLATE TO MARK DRILL HOLES KEEPING AN 8" CENTER TO CENTER
DIMENSIONS FOR TOP AND BOTTOM BARS. DRILL THROUGH DOOR FOR
1/4" SCREWS AND MOUNT BARS TOGETHER.
REV.
DESCRIPTION
ECO NO.
DATE
-
intiial check in.
4/11/2018
WEIGHT: 2.10
-
S-TA00620
-
Material <not specified>
PK
4/11/2018
--
GENERAL INSTALLATION/ SCREW
CALLOUT
PROPRIETARY &
CONFIDENTIAL
THE INFORMATION CONTAINED
IN THIS
DRAWING IS THE SOLE
PROPERTY OF HAGER
COMPANIES. ANY REPRODUCTION
INPART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF
HAGER COMPANIES IS PROHIBITED.
SHEET 1 OF 1
Q.A.
ENG. APPR.
DRAWN
DO NOT SCALE DRAWING
FINISH
MATERIAL
REV.
A
DWG. NO.
SIZE
SCALE:1:3
HAGER RESERVES
THE RIGHT TO
MAKE DESIGN
CHANGES
WITHOUT NOTICE.
CALL HAGER
ENGINEERING AT
1-800-325-9995
FOR THE LATEST
REVISION DATE
OF TEMPLATE.
170D
/
