Furinno FR16123 Operating instructions

Type
Operating instructions
FR16123
Furinno 5 Tier Wall Mount Corner Square Shelf
its Space. its Budget
www.furinno.com
NEED HELP? For help with assembly, or if you are missing a
part, please call Furinno’s Customer Service, 1-773-299-8111
from Mon-Fri, 9am-5pm (CST) or email: support@furinno.com
USEFUL HINTS BEFORE YOU START:
1. Read each step carefully before starting.
2. It is important that each step is performed in correct order to avoid difficulties.
3. Identify, sort and count the parts before assembly.
4. Assemble your furniture on packaging cardboard to prevent scratch or damage.
5. Clean the product with mild cleanser using soft damped cloth.
Do not use harsh or abrasive cleanser.
6. Using uncompatible hardware might cause damage to product.
x 2
20 min
NO HARDWARE LIST
1
C/B SCREW M4x32mm
2 SCREW COVER
3
WALL PLUG
Tools Required
QTY
2pcs
5pcs
4pcs
26pcs
QTY
26pcs
6pcs
PAGE 1/2FR1612320180312
PARTS LIST
NO
A
SHELF PANELB
C
TOP PANEL /
BOTTOM PANEL
CENTER PANEL
B
B
B
B
B
A
A
C
C
C
C
PAGE 2/2
ASSEMBLY INSTRUCTION
1
STEP 3.1
2
STEP 3.2
1
STEP 1
B
B
B
A
C
C
A
Finished
Edge
Finished
Surface
Finished
Surface
Finished
Surface
Finished
Surface
B
B
C
C
Finished
Surface
Finished
Surface
x 2
x 2
STEP 2
2.1 PLACE THE ASSEMBLED
UNIT TO THE DESIRED
MOUNTING LOCATION
AND MARK THE DRILL
POSITIONS ON WALL.
2.2 DRILL HOLES ON
EACH MARKED
LOCATION AND INSTALL
WALL PLUG (3),
AS SHOWN.
STEP 3
3.1 POSITION THE ASSEMBLED UNIT
TO THE WALL PLUG (3) ON WALL
AND TIGHTEN USING SCREW (1).
3.2 ATTACH COVERS (2) TO SCREWS’S
HEAD, AS SHOWN.
STEP 1
ATTACH PANELS (A) & (C) TO PANELS (B)
USING SCREWS (1) AND TIGHTEN IT,
AS SHOWN.
* Mark the point
to the wall.
1/4" Drill
3
STEP 2.2
* Mark the point
to the wall.
STEP 2.1
* Mark the point
to the wall.
  • Page 1 1
  • Page 2 2

Furinno FR16123 Operating instructions

Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI