Philips MCM298/37, MCM298/37B User manual

  • Hello! I am an AI chatbot trained to assist you with the Philips MCM298/37 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
What’s in the Box?
You should find these items upon opening the box.
Quick start guide
MCM 298
1 x main unit speaker
2 x speaker stands
FM and AM antennas
1
Q
uick Start Guide
3
Wall Mounting
Quick Start Guide
Wall Mounting
2
User Manual
6 x screws and dowels
2 x speaker brackets
User manual
Remote control with two
AAA batteries
MCM298 QUG_Eng 2006.7.3, 15:181
///
Setting the clock
1
2
3
4
In active mode, press CLOCK•TIMER (CLOCK on the remote) repeatedly
until the time digits flash.
Press ALBUM-/+
56 (56 on the remote) repeatedly to set the hour.
Press TITLE -/+ í / ë (ALBUM/PRESET +/- on the remote) repeatedly to
set the minute.
Press CLOCK•TIMER (CLOCK on the remote) again to store the setting.
1
2
Attach the supplied stands to the main unit
and speakers respectively so that they can
stand firmly on a desktop.
Connect the speaker cables.
Tip
– See the User Manual for how to
connect other equipment to this
system.
– See Wall Mounting for detailed
instructions if you want to mount
the system on the wall.
3
4
Connect the AM and FM antennas.
Connect the power cable of the system.
1
2
3
4
Speaker
(right)
Speaker
(left)
FM antenna
AM antenna
AC power cord
MCM298 QUG_Eng 2006.7.3, 15:182
Enjoy
C
Playing a disc
1
2
3
4
Press LEFT OPEN • CLOSE or RIGHT OPEN • CLOSE on the front panel (L
ç or R çon the remote) to open the left or right CD door respectively.
Insert one or more discs with the printed side facing you. Press LEFT OPEN •
CLOSE or RIGHT OPEN • CLOSE on the front panel (L ç or R çon the
remote) again to close the CD door.
Use DISC 1/2/3/4 (or CD 1/2/3/4 on the remote control) to select a disc for
playback.
Playback will start automatically. If not press ÉÅ.
To stop playback, press 9 .
Programming and tuning to
radio stations
1
2
3
Press SOURCE on the front panel of the system repeatedly or
TUNER on the remote to select the tuner source.
Press PROGRAM for more than two seconds to program all
available stations in order of waveband.
Press TITLE -/+ í / ë (ALBUM/PRESET +/- on the remote)
until the desired preset station is displayed.
///
PDCC-JS/JW-0627
Tip
Detailed playback features and additional functions are described in the
accompany owner's manual.
MCM298 QUG_Eng 2006.7.3, 15:183
/