2. Computers & electronics
  3. Audio & home theatre
  4. Home audio sets
  5. Philips
  6. MCM770/12

Philips MCM770/12 Quick start guide

  • Hello! I am an AI chatbot trained to assist you with the Philips MCM770/12 Quick start guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What comes inside the box of Philips MCM770/12?
    How to connect the speaker cables to Philips MCM770/12?
    How to set the clock on Philips MCM770/12?
    How to play a CD or USB mass storage device on Philips MCM770/12?
    How to program and tune to radio stations on Philips MCM770/12?
MCM770
What’s in the Box?
You should Þ nd these items upon opening the box.
FM antenna
Quick Start Guide
Remote Control
Pull out the plastic pro-
tective sheet before use.
Quick Start Guide AC adaptorUser Manual
MCM770_QSG_Eng.indd 1MCM770_QSG_Eng.indd 1 2008-9-22 10:33:052008-9-22 10:33:05
1
2
3
4
In standby mode, press and hold CLOCK on the remote control.
When the hour digits ß ash, turn VOL on the system or press VOL+/- on the remote control
to set the hours.
Press
CLOCK again and the minute digits ß ash. Then turn VOL on the system or press
VOL+/- on the remote control to set the minutes.
Press
CLOCK again to conÞ rm the time setting.
1
2
3
Connect the speaker cables.
Connect the FM antenna.
Connect the AC adaptor of the system.
Speaker
(right)
Speaker
(left)
FM antenna
AC adaptor
Setting the clock
IMPORTANT!
– To set clock in the Eco Power mode, press and hold STANDBY-ON
2
on the set for 3 seconds or more to switch to normal
standby mode Þ rst before proceeding with the procedures below.
Tip
See the User Manual for how to connect
other equipment to this system.
MCM770_QSG_Eng.indd 2MCM770_QSG_Eng.indd 2 2008-9-22 10:33:062008-9-22 10:33:06
4
3
2
1
Playing a disc
Press SOURCE on the front panel to select DISC or press CD on the
remote control.
Press
ç
to open the CD compartment.
Insert a disc with the printed side facing up. Press
ç
again to close the
compartment.
Playback will start automatically. If not, press
ÉÅ
.
To stop playback, press
9
.
CD
5
1
2
3
Insert the USB device’s USB plug into the socket
on the set.
Press SOURCE once or more (or USB on the remote control) to select USB.
Play the USB’s audio Þ les as you do with the albums/tracks on a CD.
Playing a USB mass storage device
With the Hi-Fi system, you can use USB ß ash memory (USB 2.0 or USB1.1),
USB ß ash players
(USB 2.0 or USB1.1)
,
memory cards (requires an additional card reader to
work with this Hi-Fi system).
MCM770_QSG_Eng.indd 3MCM770_QSG_Eng.indd 3 2008-9-22 10:33:072008-9-22 10:33:07
1
2
3
Press SOURCE (FM on the remote control) to select tuner source.
Press PROG on the remote control for more than two seconds to program all available sta-
tions in order of waveband.
Press
¡
/
™
until the desired preset station is displayed.
Programming and tuning to radio stations
PDCC-JS-WP-0829
Tip
Detailed playback features and additional functions are described in the
accompany owner's manual.
C
Royal Philips Electronics N.V. 2008
All rights reserved.
http://www.philips.com
MCM770_QSG_Eng.indd 4MCM770_QSG_Eng.indd 4 2008-9-22 10:33:072008-9-22 10:33:07
/