Dakota Digital VHX-40F Mounting Manual

Manual # 650403B

VHX-40F

Dakota Digital VHX Instrument Installation

For 1940 Ford Car

Your new VHX-40F kit includes:

Installation

Control Box

CAT5 Cable

Universal Sender Pack

Installation Manuals

VHX Display

1. Remove the stock cluster from the dash and be sure to retain all hardware for reassembly.

Ford Adapter

Switch Assembly

Manual # 650403B

WARNING: This product can expose you to chemicals including lead, which is known to the State of

California to cause cancer and birth defects or other reproductive harm. For more information go to

www.P65Warnings.ca.gov

2. Remove the protective tape from the clear lens.

3. Connect the CAT5 cable to the system as

the VHX cluster is installed into the dash.

Watch carefully so you don’t scratch or

damage the lens or bezel, and take care

when routing the CAT5 cable to the control

box location.

4. Re-install the cluster into the vehicle using stock hardware and refer to

the main manual for wiring instructions to complete the VHX installation.