Dakota Digital VHX-48F-PU Mounting Manual

Hello! I am an AI chatbot trained to assist you with the Dakota Digital VHX-48F-PU Mounting Manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

Manual # 650492A

VHX-48F-PU

Dakota Digital VHX Instrument Installation

For 1948-50 Ford Pickup

Your new VHX-48F-PU kit includes:

Installation

Control Box

CAT5 Cable

Universal Sender Pack

Installation Manuals

VHX Display

1. Remove the stock gauge cluster from the dash and retain the hardware for reassembly.

Ford Speed Adapter

Switch Assembly

Manual # 650492A

WARNING: This product can expose you to chemicals including lead, which is known to the State of

California to cause cancer and birth defects or other reproductive harm. For more information go to

www.P65Warnings.ca.gov

3. Connect the CAT5 cable to the back

of the VHX system. Take care when

routing the CAT5 cable to the

control box mounting location.

2. The VHX system is a direct replacement of the original cluster, so use the three mounting tabs to

secure the VHX system to the dash using the stock hardware.

4. Refer to the main manual for wiring instructions to complete the VHX installation.