Trendnet TPL-410AP Quick Installation Guide

Type
Quick Installation Guide

This manual is also suitable for

Trendnet TPL-410AP is a Powerline 500 Wireless Kit that extends your internet connection to areas of your home or office where Wi-Fi is weak or unavailable. With speeds up to 500Mbps, you can enjoy lag-free gaming, smooth video streaming, and fast file transfers. The TPL-410AP also features a built-in wireless access point to create a new or extend an existing Wi-Fi network. It's easy to set up, simply plug the TPL-406E into an outlet near your router and connect it with an Ethernet cable.

Trendnet TPL-410AP is a Powerline 500 Wireless Kit that extends your internet connection to areas of your home or office where Wi-Fi is weak or unavailable. With speeds up to 500Mbps, you can enjoy lag-free gaming, smooth video streaming, and fast file transfers. The TPL-410AP also features a built-in wireless access point to create a new or extend an existing Wi-Fi network. It's easy to set up, simply plug the TPL-406E into an outlet near your router and connect it with an Ethernet cable.

Quick Installation Guide
Powerline 500 Wireless Kit
English
TPL-410APK
LAN
Internet
NOTE: Data LED’s on both devices will turn solid
when connected on both devices. (This may take few minutes).
Press and hold the Link button
on the bottom of the TPL-406E
for 2 seconds, and then let go.
Within 2 minutes, press the Sync
button on the front of the TPL-410AP
for 2 seconds.
2
Hardware Installation
Connect a network cable
from your router to the
TPL-406E’s network port.
1
TPL-406E
After you have completed the steps above. Run the following steps to secure your powerline network.
Secure Connection (Recommended)
TPL-410AP
For added security, the TPL-410AP’s Wi-Fi network is pre-
encrypted with its own unique security key. You can find the
unique security key and pre-assigned network name (SSID)
on the device label located on the back of the unit and sticker
inside the packaging.
Connect wirelessly to TPL-410AP:
4
Preset
Wireless Settings
Wi-Fi Name/SSID
XXXXXXXXXXXX
Wi-Fi Key
XXXXXXXXXXXX
Management Login
http://192.168.10.100
username: admin
password: admin
TPL-410AP
Plug the TPL-410AP
into power outlet.
3
Plug the TPL-406E
into power outlet.
2
TPL-406E
Link
LAN2
DATA
ETHERNET
POWER
LAN2
DATA
ETHERNET
POWER
After pushing both buttons, the Data
LEDs will blink and then turn solid
indicating a secured connection has
been established.
3
TPL-410AP
LAN2
DATA
ETHERNET
POWER
1
Guía de instalación rápida
Powerline 500 Wireless Kit
Español
TPL-410APK
Enchufe el TPL-406E en
la toma de corriente.
Enchufe el TPL-410AP
en la toma de corriente.
NOTA: Los LED de datos de ambos dispositivos se iluminará
cuando ambos dispositivos están conectados. (Esto puede
tardar unos minutos).
Apreté y mantenga pulsado el
botón LINK en la parte inferior de
la TPL-406E durante 2 segundos,
y luego suéltelo.
Instalación de hardware
Conectar un cable de red
desde el router al puerto
de red de la TPL-406E.
Para mayor seguridad, la red Wi-Fi de la TPL-410AP es pre-
encriptado con su propia clave de seguridad única. Puede
encontrar la clave de seguridad única y nombre de red (SSID)
pre-asignado en la etiqueta del dispositivo situado en la parte
posterior de la unidad y la etiqueta adhesiva en el interior del
embalaje.
Conéctese de forma inalámbrica a TPL-410AP:
LAN
Internet
TPL-410AP
3
TPL-406E
LAN2
DATA
ETHERNET
POWER
Preset
Wireless Settings
Wi-Fi Name/SSID
XXXXXXXXXXXX
Wi-Fi Key
XXXXXXXXXXXX
Management Login
http://192.168.10.100
username: admin
password: admin
4
2
Después de presionar ambos botones,
el LED de datos parpadeará y luego se
tornara sólida y esto indica que se ha
establecido una conexión segura.
Después de haber completado los pasos anteriores. Ejecute los siguientes pasos para proteger su red
de línea eléctrica.
Dentro de 2 minutos, apreté el
botón SYNC en la parte frontal de
la TPL-410AP durante 2 segundos.
Conexión Segura (Recomendado):
TPL-406E TPL-410AP TPL-410AP
Link
LAN2
DATA
ETHERNET
POWER
LAN2
1 2
3
1
  • Page 1 1
  • Page 2 2

Trendnet TPL-410AP Quick Installation Guide

Type
Quick Installation Guide
This manual is also suitable for

Trendnet TPL-410AP is a Powerline 500 Wireless Kit that extends your internet connection to areas of your home or office where Wi-Fi is weak or unavailable. With speeds up to 500Mbps, you can enjoy lag-free gaming, smooth video streaming, and fast file transfers. The TPL-410AP also features a built-in wireless access point to create a new or extend an existing Wi-Fi network. It's easy to set up, simply plug the TPL-406E into an outlet near your router and connect it with an Ethernet cable.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages