Lowrance HDS 10 Template

8.084

[205.34]

7.992

[203.00]

11.487

[291.76]

Ø2.77 [Ø70.35]

HOLE SAW 4 PLS.

10.315

[262.00]

Ø.12 [#31 DRILL]

FOR SELF TAPPING HOLE

(MATERIAL DEPENDENT)

4 PLS.

Part. 988-0176-16A

TOP

Surface area needed to mount unit without cover

Cut on this line

THIS TEMPLATE CAN ONLY BE USED

WITH THE HDS-10 AND HDS-10M.

This template must be printed on

11x17, A3 or larger size paper

Printing instructions:

1. After selecting File | Print, the printer settings page

will appear.

2. Set Page Scaling to “None.”

3. Select “Choose Paper Source by PDF page size.”

4. Print the document.

VERIFY TEMPLATE DIMENSIONS BEFORE CUTTING ANY HOLES IN YOUR VESSEL

This manual is also suitable for

Download PDF