Lowrance HDS-5 Template

Ø1.50 [Ø38.1]

HOLE SAW 4 PLS.

5.79

[147.0]

6.57 [166.8]

5.12

[130.0]

5.05

[128.3]

Ø.12 [#31 DRILL]

FOR SELF TAPPING HOLE

(MATERIAL DEPENDENT)

4 PLS.

TOP

Surface area needed to mount unit without cover

Part. 988-0176-13A

Cut on this line

This template can be printed on

letter, A4, or larger size paper.

Printing instructions:

1. After selecting File | Print, the printer

settings page will appear.

2. Set Page Scaling to “None.”

3. Select “Choose Paper Source by PDF page

size.”

4. Print the document.

This template can only be used

for HDS-5x and HDS-5 units.

VERIFY TEMPLATE DIMENSIONS BEFORE CUTTING ANY HOLES IN YOUR VESSEL

This manual is also suitable for

Download PDF