Gigaset DX800A all in one User guide

Type
User guide

This manual is also suitable for

DL500A/DX600A-ISDN/DX800A / ZAF_aus Ost eng / A31008-N3101-W101-2-7643 /
Congratulations
By purchasing a Gigaset, you have chosen a brand that is fully committed
to sustainability. This product’s packaging is eco-friendly!
To learn more, visit www.gigaset.com.
DL500A/DX600A-ISDN/DX800A / ZAF_aus Ost eng / A31008-N3101-W101-2-7643 /
1
Gigaset DX800A all in one, DX600A ISDN and DL500A – your perfect companion
DL500A/DX600A-ISDN/DX800A / ZAF_aus Ost eng / A31008-N3101-W101-2-7643 / introduction.fm / 25.03.11
Version 4, 16.09.2005
Gigaset DX800A all in one, DX600A ISDN and DL500A –
your perfect companion
... impressive inside and out. Go crazy for the vibrant 3.5" TFT display, first-class sound quality
and elegant exterior. Your Gigaset can do a lot more than just make calls:
Bluetooth, Ethernet, DECT and (device-specific) FAX port
Connect your Gigaset to the Internet and your PC via Ethernet. Use public and private direc-
tories on the Internet (
¢ page 39). Update the directory on your Gigaset, the address book
on your Bluetooth mobile phone and your directory on the PC simultaneously.
Directory with vCards – calendar and appointments
Save phone numbers and other data to the local directory (¢ page 38). Enter appointments
and anniversaries in the calendar and set reminders.
Use your Gigaset as a PABX
Register up to six handsets and use your Gigaset answering machine.
Using the Bluetooth interface, you can register up to five GSM mobile phones. You can con-
nect one of the mobile phones with the base and make calls using this GSM connection –
Link2mobile.
Go online with your Gigaset
Use your phone's Info Centre and have information specifically provided for the phone from
the Internet shown on the display.
Do not disturb
Switch off the display backlight at night (¢page 44), use time control for calls (¢ page 45)
or reject unknown calls (
¢ page 45).
Other practical information
Transfer the directory from an existing Gigaset handset (¢ page 38), use the programmable
function keys (
¢ page 43) for speed dial and quick access to important functions, use the
convenient headset to make calls, read your e-mail messages (without a PC) on your phone.
It's easy to configure your Gigaset DX800A all in one/DX600A ISDN thanks to
the wizards
These determine the MSNs for your ISDN connection and general VoIP provider data (pro-
vider-specific) and assist you with registering handsets and assigning send and receive con-
nections to the base, handsets, fax machine and integrated answering machine (
¢ page 16).
Environment
Gigaset Green Home – be environmentally aware when using your phone. For details of our
ECO DECT products, visit www.gigaset.com/service
2
Gigaset DX800A all in one, DX600A ISDN and DL500A – your perfect companion
DL500A/DX600A-ISDN/DX800A / ZAF_aus Ost eng / A31008-N3101-W101-2-7643 / introduction.fm / 25.03.11
Version 4, 16.09.2005
Further information about your phone can be found at:
www.gigaset.com/gigasetDX800A (Gigaset DX800A all in one)
www.gigaset.com/gigasetDX600A
(Gigaset DX600A ISDN)
www.gigaset.com/gigasetDL500A
(GigasetDL500A)
After purchasing your Gigaset phone, please register it at www.gigaset.com/service – this will
ensure any questions you may have or warranty services you request are dealt with even faster!
Have fun using your new phone!
User guide
This document only describes how to get started with your Gigaset phone and its key func-
tions in condensed form.
There is a detailed description of the phone and its functions and a description of its
Web configurator on the enclosed CD. You can make phone settings from the PC via the
Web configurator (the phone's Web interface).
These instructions are in PDF format. You will need Adobe® Reader® to view these docu-
ments. You can also find Adobe® Reader® on the CD or on the Internet at www.adobe.com
.
Please note
To change the display language, proceed as follows:
¤ Press right on the control key v.
¤ Press the following keys in sequence: *#Q3#.
¤ Press up/down on the control key quntil the correct language is selected. Then press
the right display key.
3
Base overview
DL500A/DX600A-ISDN/DX800A / ZAF_aus Ost eng / A31008-N3101-W101-2-7643 / overview.fm / 25.03.11
Version 4, 16.09.2005
Base overview
1 Adjust volume S = quieter; R = louder
During a call/message playback:
Handsfree/receiver volume;
When an external call is being signalled:
Ringer volume
2 Display
3 Display keys (programmable; page 43)
In the menu: Open a menu for further
functions
4 Message key (page 37)
Access to call and message lists;
Flashes: New message/call or new firmware/
new provider profile available
5 End/back key (red key)
End call, cancel function, go back one menu
level (press briefly), back to idle status (press
and hold)
6 Function keys (programmable; page 43)
7 Redial
Open redial list (page 37)
8 Handsfree key
9 Mute key
During a call: Activate/deactivate microphone
10 * key
Activate/deactivate ringer (press and hold);
Text input: Special characters table
11 Back key for answering machine
During playback: Back to the start of the
message/previous message
12 Playing back messages
Activate/deactivate message playback
13 On/off key for answering machine
Activate/deactivate answering machine
(page 47)
14 # key
For text input: Switch between upper/lower
case letters and digits
15 Control key
16 Microphone
123465
7891011 12 1314 15 16
4
Display icons
DL500A/DX600A-ISDN/DX800A / ZAF_aus Ost eng / A31008-N3101-W101-2-7643 / overview.fm / 25.03.11
Version 4, 16.09.2005
Display icons
Appointment entered
in calendar
Current date
Ã
1
2
3
·06:30
à 02
Mar 2010
13:52
INT 1
Calls Calendar
M T W T F S S
0 0 0 0 0 0 0
0 0 1 1 1 1 1
1 1 1 1 1 2 2
2 2 2 2 2 2 2
2 3 3
Base status
(two lines)
Current month/year
Time
Internal name
Ø
Ù
Ú
Signalling
External
call
Ø
ã
Ú Ø
Ã
Ú
Internal
call
Answering machine
is recording
Ã
1
2 3 ¼ òôl ó ·06:30
à 02
10
Ë 09
n08
ØÜ
Appointment/
anniversary
ؼÚ
Alarm
clock
Display in idle status (example)
Status display in the headers: The following icons are displayed dependent on the settings
and the operating status of your base:
Answering machine icon
DX600A/DX800A:
1/ 2/ 3
numbers of the activated answering machines (orange=on)
DL500A: 1 (orange) answering machine activated
Eco Mode+ activated (white),
Eco Mode+ and Eco Mode activated (green)
ò:Bluetooth activated; ô:Bluetooth headset connected;
l: Bluetooth GSM mobile phone connected
Ringer deactivated (page 45)
Replaced by ñ, when alert tone activated
Alarm switched on and wake-up time set
Number of new messages:
u In the missed alarms list
u In the SMS list (page 41) or e-mail list
u In the missed call list (page 37)
u On the network mailbox
5
Contents
DL500A/DX600A-ISDN/DX800A / ZAF_aus Ost eng / A31008-N3101-W101-2-7643 / SaturnIVZ.fm / 25.03.11
Version 4, 16.09.2005
Contents
Gigaset DX800A all in one, DX600A ISDN and DL500A –
your perfect companion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Base overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Display icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
First steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Checking the package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Setting up the base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Connecting the base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Gigaset DX600A ISDN, DX800A all in one:
Setting up the base – installation wizard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Date/time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Making calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Making an external call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Making an internal call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Ending a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Accepting a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Activating/deactivating handsfree/open listening mode . . . . . . . . . . . . . . . . . . . . . . 36
Muting the base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Making calls using network services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Using lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Redial list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Call lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Opening lists with the message key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Using directories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Using the local base directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Using online telephone directories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Using the private net directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Using the Gigaset.net directory (Gigaset DX800A) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Sending SMS (text messages) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Writing/sending SMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Receiving an SMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Reading SMS, managing lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Registering Bluetooth devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Using a Bluetooth headset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Using GSM mobile phones – Link2mobile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
6
Contents
DL500A/DX600A-ISDN/DX800A / ZAF_aus Ost eng / A31008-N3101-W101-2-7643 / SaturnIVZ.fm / 25.03.11
Version 4, 16.09.2005
Setting up the base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Accessing functions and numbers quickly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Setting the display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Changing the handsfree/receiver volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Setting ringers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Activating/deactivating advisory tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Changing the system PIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Setting your own area code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Operating the base answering machine . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Operating via the base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Activating/deactivating call screening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Operating when on the move (remote operation) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Customer Service & Assistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Questions and answers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Authorisation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Menu overview Gigaset DX800A all in one . . . . . . . . . . . . . . . . . . . . . . . . . 54
Menu overview Gigaset DX600A ISDN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Menu overview Gigaset DL500A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Insert strip – labelling function keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
7
Safety precautions
DL500A/DX600A-ISDN/DX800A / ZAF_aus Ost eng / A31008-N3101-W101-2-7643 / security.fm / 25.03.11
Version 4, 16.09.2005
Safety precautions
Warning
Be sure to read this user guide and the safety precautions before using your telephone.
Explain their content and the potential hazards associated with using the telephone to your
children.
Use only the power adapter supplied, as indicated on the underside of the base.
Use only the cables supplied for fax, fixed line, ISDN, LAN and receiver connection
and connect these to the intended port only.
Using your telephone may affect nearby medical equipment. Be aware of the tech-
nical conditions in your particular environment e.g., doctor's surgery.
Do not install the phone in a bathroom or shower room. The phone is not splash-
proof.
Do not use your phone in environments with a potential explosion hazard
(e.g., paint shops).
If you give your phone to a third party, make sure you also give them the user guide.
Remove faulty telephones from use or have them repaired by our Service team,
as they could interfere with other wireless services.
Please note
u Please note that only terminals that are operated in-house (inside buildings) may be con-
nected to the analogue TAE/ISDN connections.
u Not all functions described in this user guide are available in all countries and with all pro-
viders.
$
ƒ
8
First steps
DL500A/DX600A-ISDN/DX800A / ZAF_aus Ost eng / A31008-N3101-W101-2-7643 / starting.fm / 25.03.11
Version 4, 16.09.2005
First steps
Checking the package contents
1One base
2 One receiver to be connected to the base
3 One (coiled) cable for connecting the handset to the base
4 One power cable for connecting the base to the mains power supply
5 This quick guide
6 One CD
7 Various connection cables (device-specific):
Gigaset DX800A all in one:
One Ethernet (LAN) cable (Cat 5 with 2 RJ45 modular jacks) for connecting
to a router (LAN/Internet) or PC
One phone cable for connecting to the analogue fixed line
(TAE RJ45 8 pin; the outer 2 pins are in use, cable slightly flattened)
One phone cable for connecting to the ISDN (8 pin with 2 mini western
jacks 8/8; the inner 4 pins are in use, cable slightly flattened)
One cable for connecting a fax device to the base (6 pin with 2 mini west-
ern jacks 6/6)
b
5
6
3
21 4
7
a
c
d
a
b
c
d
9
First steps
DL500A/DX600A-ISDN/DX800A / ZAF_aus Ost eng / A31008-N3101-W101-2-7643 / starting.fm / 25.03.11
Version 4, 16.09.2005
Gigaset DX600A ISDN:
One Ethernet (LAN) cable (Cat 5 with 2 RJ45 modular jacks) for connecting
to a router (LAN/Internet) or PC
One phone cable for connecting to the ISDN (8 pin with 2 mini western
jacks 8/8; the inner 4 pins are in use, cable slightly flattened)
One cable for connecting a fax device to the base
(6 pin with 2 mini western jacks 6/6)
Gigaset DL500A:
One Ethernet (LAN) cable (Cat 5 with 2 RJ45 modular jacks) for connecting
to a router (LAN/Internet) or PC
One phone cable for connecting to the analogue fixed line
(TAE RJ11 6 pin)
Setting up the base
The base is designed for use in dry rooms in a temperature range of +5°C to +45°C.
¤ Set up the base at a central point in the building.
The phone's feet do not usually leave any marks on surfaces. However, due to the
multitude of different varnishes and polishes used on today's furnishings, the
occurrence of marks on the surfaces cannot be completely ruled out.
Firmware updates
This user guide describes the functions of your base from firmware version
56.00.
Whenever there are new or improved functions for your Gigaset, firmware
updates are made available for you to download to your base. If this results in
operational changes when using your base, a new version of this user guide or
the necessary amendments will be published on the Internet at
www.gigaset.com
.
Select the product to open the relevant product page for your base, where you
will find a link to the user guide.
a
c
d
a
b
Please note
If you wish to operate handsets from the base, consider the range of the base.
This is up to 300 m in unobstructed outdoor areas and up to 50 m inside build-
ings. The range is reduced when Eco Mode is activated.
Warning
u Never expose the telephone to any of the following: Heat sources, direct sun-
light or other electrical appliances.
u Protect your Gigaset from moisture, dust, corrosive liquids and fumes.
10
First steps
DL500A/DX600A-ISDN/DX800A / ZAF_aus Ost eng / A31008-N3101-W101-2-7643 / starting.fm / 25.03.11
Version 4, 16.09.2005
Connecting the base
The following diagram is an overview of all connections for your base.
The individual connections are described in detail below.
Follow the steps in the order given below:
1 Connect the receiver to the base.
2 Connect the base to the telephone network.
3 Connect the base to the mains power supply.
4 Connect the base to the router for accessing the Internet (connection via router
and modem or via router with integrated modem) and for configuring the base
via the Web configurator.
5 Connect a wire-bound headset to the base.
*) Additional device-specific connections:
6 Gigaset DX600A ISDN/DX800A all in one:
Connect the base to a fax device.
7 Gigaset DX800A all in one: You can connect a PC to the base via the second LAN
socket LAN2 (optional) e.g., to connect the PC to the router. The base takes on
the task of a switch.
11
First steps
DL500A/DX600A-ISDN/DX800A / ZAF_aus Ost eng / A31008-N3101-W101-2-7643 / starting.fm / 25.03.11
Version 4, 16.09.2005
1. Connecting the receiver to the base
1 Insert the jack, which can be found on the longer straight end of the connection
cable, into the connection port marked with the symbol ^ on the underside of
the base.
2 Place the straight part of the cable in the cable recess provided.
3 Insert the other jack on the connection cable into the port on the receiver.
3
1
2
Underside of
the base
*)
*) The LAN2 and FAX connections are not available for all devices
*)
12
First steps
DL500A/DX600A-ISDN/DX800A / ZAF_aus Ost eng / A31008-N3101-W101-2-7643 / starting.fm / 25.03.11
Version 4, 16.09.2005
2. Connecting the base to the telephone network
1 Insert one end of the phone cable (¢ page 8) from the rear into the recess in
the housing.
Gigaset DX800A all-in-one:
Use the 8 pin cable with 2 mini western jacks 8/8 if you want to connect the
phone to the ISDN network (
¢ page 8, cable 7c).
Use the TAE connection cable with RJ11 jack to connect to the analogue fixed
line (
¢ page 8, cable 7b).
2 Plug the telephone cable into the port marked with the symbol ] on the un-
derside of the base.
3 Then connect the phone cable to your phone connection (3a ISDN or 3b ana-
logue fixed line).
3b
2
1
Underside of
the base
3a
*)
*) The LAN2 and FAX connections are not available for all devices (¢page 10)
*)
Your telephone automatically detects which line it is connected to. The
installation wizard will later prompt you to make the necessary settings for
the current connection (
¢ page 16).
13
First steps
DL500A/DX600A-ISDN/DX800A / ZAF_aus Ost eng / A31008-N3101-W101-2-7643 / starting.fm / 25.03.11
Version 4, 16.09.2005
3. Connecting the base to the mains power supply
1 Insert the small jack on the power cable from the rear into the recess in the
housing.
2 Plug the jack into the port marked with the symbol \ on the underside of
the base.
3 Then connect the power cable to the mains power supply.
The software of the base is loaded. After a short time, the idle display is displayed
on the base; it is in idle mode.
Now you can make calls with your base via the fixed line or ISDN, and can be
reached via your fixed line number or the main number of your ISDN connection!
The answering machine on the base is set with a pre-recorded announcement in
answer and record mode (
¢ page 47).
1
3
2
*)
*) The LAN2 and FAX connections are not available for all devices (¢page 10)
*)
Warning
u Keep the power cable plugged in at all times for operation, as the base does
not work without a mains connection.
u Use only the power and telephone cables supplied.
Gigaset DX800A all in one, DL500A:
The pin connections of telephone cables for the analogue fixed line can vary.
The correct pin connections can be found in the long user guide on the
enclosed CD.
14
First steps
DL500A/DX600A-ISDN/DX800A / ZAF_aus Ost eng / A31008-N3101-W101-2-7643 / starting.fm / 25.03.11
Version 4, 16.09.2005
4. Connecting the base with a router (Internet) or PC
For the Gigaset DX800A all in one, the connection to a router is mainly needed for
the Internet telephony VoIP (Voice over Internet Protocol). You can set up and con-
figure up to six accounts (VoIP phone numbers) from one or several VoIP provider(s)
on the base.
All variants of the base require a connection to a router for the following features
of the phone:
u You wish to be notified as soon as new software is available for your base on the
Internet and load this onto your base.
u The date and time on your base should be updated by a time server on the Inter-
net.
u You wish to go online with your base, i.e., use the Info Centre, display info serv-
ices or search for phone numbers in an online directory.
The base will have to be connected to a PC (via a router or directly) if you wish to
use the following features of your base:
u You wish to set up the base using its Web configurator.
u You wish to use the additional PC software, "Gigaset QuickSync over Ethernet"
to dial numbers via the PC (e.g., numbers from a PC directory) or to load images
or melodies from the PC to your base.
For Internet access you need a router connected to the Internet via a modem (this
may be integrated in the router).
Note on Gigaset DX800A all in one
u For telephony via the Internet, you need a broadband Internet connection
(e.g., DSL) with flat rate (recommended) or volume rate and a router that con-
nects your phone to the Internet. You can find a list of recommended routers
on the Internet at:
www.gigaset.com/service
From here, go to the FAQ page and select your Gigaset IP telephone. Search
for "Router", for example.
u The base has a second LAN connection which you can use, e.g., to connect
your PC to the Internet (router).
u Data protection notice: Further information about the Gigaset.net service
data saved can be found at
www.gigaset.net/privacy-policy
15
First steps
DL500A/DX600A-ISDN/DX800A / ZAF_aus Ost eng / A31008-N3101-W101-2-7643 / starting.fm / 25.03.11
Version 4, 16.09.2005
1 Guide the end of the Ethernet cable provided (Cat 5 with 2 RJ45 modular jacks)
from the rear through the recess in the housing.
2 Plug the jack on the Ethernet cable into the LAN port on the underside of
the base.
3 Then insert the second Ethernet cable plug into a LAN socket on the router.
Gigaset DX800A all in one:
You are now able to establish VoIP connections within Gigaset.net (¢ page 40).
Gigaset DL500A:
You have completed the setup for the base.
For more information see page 33, "Date/time".
1
2
3
*)
*) The LAN2 and FAX connections are not available for all devices (¢page 10)
*)
16
First steps
DL500A/DX600A-ISDN/DX800A / ZAF_aus Ost eng / A31008-N3101-W101-2-7643 / starting.fm / 25.03.11
Version 4, 16.09.2005
Gigaset DX600A ISDN, DX800A all in one:
Setting up the base – installation wizard
As soon as the phone is connected to the mains power supply, the firmware is
started. If no connections have been generated on the base yet, the installation
wizard starts. The wizard allows you to make all necessary settings for your phone.
The following message appears in the display.
Several individual wizards are combined to form the installation wizard. The indi-
vidual wizards that start on your device depend on your type of device and the con-
nections to which the device is connected. The following individual wizards are
included in the installation wizard:
1ISDN wizard
2IP wizard
3 Registration wizard
4 Connection wizard
Refer to the following table to see which of the following steps are run on your
device and connection type, and which individual wizards are started.
Note on Gigaset DX800A all in one
The phone checks which phone connection (analogue fixed line or ISDN) it is
connected to.
¤ Press the display key §Yes§ to start
installation.
Setup - Welcome
?
Would you like help
setting up
your phone?
No Yes
Please note
u The installation wizard only starts if no connection has been configured on
the base yet. If connections have already been configured, you can start the
VoIP and ISDN wizards (individually) via the menu.
u Use only the installation wizard on the base, but not on a registered handset.
17
First steps
DL500A/DX600A-ISDN/DX800A / ZAF_aus Ost eng / A31008-N3101-W101-2-7643 / starting.fm / 25.03.11
Version 4, 16.09.2005
Please note:
u If the installation wizard is activated, no other handset can access the Settings
menu on the base.
u To quit the installation wizard before the process is complete, press and hold the
red end key T. All changes you have already saved using
§OK§ are retained.
u To skip a setting, press left on the control key u or the display key §No§.
1. ISDN wizard: Assigning/entering the connection's MSNs
Prerequisite: You have connected the base to the ISDN telephone network.
Several numbers (MSNs) were provided by the network provider when you
received your ISDN connection confirmation. You can save up to ten numbers
(MSNs) on your base. If there is no MSN entered on your base, you can determine
the MSNs of your connection with the ISDN wizard, i.e., call them up from the
exchange (automatic MSN assignment) or enter them manually.
Connection Procedure
GigasetDX600A ISDN 1. ISDN wizard (¢ page 17)
3. Registration wizard
4. Connection wizard
GigasetDX800A all in one
for connection to ISDN and VoIP
1. ISDN wizard (
¢ page 17)
2. IP wizard
3. Registration wizard
4. Connection wizard
GigasetDX800A all in one
for connection to the analogue
fixed line and VoIP
2. IP wizard (
¢ page 20)
3. Registration wizard
4. Connection wizard
Is started on Gigaset DX600A ISDN, Gigaset DX800A all-in-one with ISDN connection.
Please note
Not every ISDN provider supports automatic MSN assignment. If this feature is
not supported, you must enter the MSNs for your connection manually.
18
First steps
DL500A/DX600A-ISDN/DX800A / ZAF_aus Ost eng / A31008-N3101-W101-2-7643 / starting.fm / 25.03.11
Version 4, 16.09.2005
If no MSNs were found, No MSNs detected. is shown. You are prompted to enter
your MSNs manually:
¤ Press the display key §Yes§ to start
installation.
¤ Press the display key §OK§ to start
automatic MSN assignment. This
process will take some time.
Detecting your ISDN phone num-
bers (MSNs)... is displayed on the
screen.
After the MSNs have been successfully
assigned, a list containing the MSNs is
displayed.
¤ Press the display key §OK§ to close the
ISDN wizard.
The display shows ISDN installation
complete.
ISDN Wizard
?
Start ISDN
installation wizard?
No Yes
ISDN Wizard
Ð
This wizard helps you
detect and configure
your ISDN phone -
numbers (MSNs).
OK
ISDN Wizard
Ð
MSN Assignment
MSN1: 12345601
MSN2: 12345602
MSN3: 12345603
MSN4: 12345604
Change OK
Please note
You can change the name of the MSNs (see detailed user guide for the base on
the enclosed CD).
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72

Gigaset DX800A all in one User guide

Type
User guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI