ESAB Aristo®Feed 30L-4 is a wire feed unit intended for MIG/MAG welding together with welding power source AristoMig 300. It contains four-wheel drive wire feed mechanism as well as control electronics and can be used together with wire on ESAB’s MarathonPact, or on wire bobbin. The wire feed unit can be installed either at the trolley for the power source, suspended above the workplace, on a counter balance device or on the floor with or without wheel set.
ESAB Aristo®Feed 30L-4 is a wire feed unit intended for MIG/MAG welding together with welding power source AristoMig 300. It contains four-wheel drive wire feed mechanism as well as control electronics and can be used together with wire on ESAB’s MarathonPact, or on wire bobbin. The wire feed unit can be installed either at the trolley for the power source, suspended above the workplace, on a counter balance device or on the floor with or without wheel set.
ESAB Aristo®Feed 30L-4 is a wire feed unit intended for MIG/MAG welding together with welding power source AristoMig 300. It contains four-wheel drive wire feed mechanism as well as control electronics and can be used together with wire on ESAB’s MarathonPact, or on wire bobbin. The wire feed unit can be installed either at the trolley for the power source, suspended above the workplace, on a counter balance device or on the floor with or without wheel set.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI