EINHELL TC-CS 1200 Product Sheet
- Category
- Flat panel accessories
- Type
- Product Sheet
The TC-CS 1200 hand-held circular saw is a reliable, powerful DIY tool and versatile helper on numerous cutting-to-size jobs in wood. The sawing
depth and tilt angle of the saw can be adjusted without tools, and with the carbide blade you can make cuts both with and across the grain.
TC-CS 1200
Circular Saw
Item No.: 4330936
Ident No.: 11025
Bar Code: 4006825593297
Features
Handy circular saw for straight cuts in wood materials-
Safe stop thanks to large handle-
Also with splitter for greater safety on the job-
Carbide blade for sawing both with and across the grain-
Cutting depth adjustment without tools for top cutting results-
Saw table adjustment without tools for angular cuts-
Complete with parallel stop for accurate cuts-
Complete with connection for dust extraction-
Long-lasting, galvanized soleplate-
Technical Data
- Mains supply 230 V | 50 Hz
- Power 1230 W
- Idle speed 5000 min^-1
- Saw blade Ø160 x ø16 mm
- Number of saw teeth 24 Pieces
- Cutting depth at 45° 37 mm
- Cutting depth at 90° 55 mm
Logistic Data
- Product weight 3.7 kg
- Gross weight single packaging 4.5 kg
- Pieces per export carton 4 Pieces
- Gross weight export carton 19 kg
- Dimensions export carton 530 x 365 x 535 mm
- Container quantity (20"/40"/40"HC) 1056 | 2280 | 2464
Illustrations can contain accessories, which are not included in standard extent of delivery
Illustration similar (in design), production-wise modifications reserved
GS mark belongs to the product itself only, excluded accessory
Generated at: 23.02.2016 07:40
Page 1
-
1
EINHELL TC-CS 1200 Product Sheet
- Category
- Flat panel accessories
- Type
- Product Sheet
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
