EINHELL TC-TS 820 Product Sheet

Category
Video splitters
Type
Product Sheet

The EINHELL TC-TS 820 is a compact and powerful bench-type circular saw, ideal for DIY enthusiasts. It features a tilting saw blade for precision miter cutting, a parallel stop for clean cuts, and a scale on the table for fast adjustment. The saw is also equipped with a powerful and low-maintenance asynchronous motor, an extractor adapter for wet-and-dry vacuum cleaners, and plastic feet for vibration absorption and stability.

The EINHELL TC-TS 820 is a compact and powerful bench-type circular saw, ideal for DIY enthusiasts. It features a tilting saw blade for precision miter cutting, a parallel stop for clean cuts, and a scale on the table for fast adjustment. The saw is also equipped with a powerful and low-maintenance asynchronous motor, an extractor adapter for wet-and-dry vacuum cleaners, and plastic feet for vibration absorption and stability.

The TC-TS 820 bench-type circular saw is a compact, powerful tool that provides good service to DIY enthusiasts wanting to cut wood, fiberboard and
many other materials. The saw blade tilts to the left to enable precision miter cutting.
Table Saw
TC-TS 820
Item No.: 4340410
Ident No.: 11025
Bar Code: 4006825590784
Features & Benefits
Use on any workbench is possible thanks to the compact design-
Portable design for mobile use-
Blade angle adjustment to the left-
Parallel stop with 2 heights for clean cuts-
Scale on the table enables fast adjustment for parallel cuts-
Cable winder for tidy storage-
Powerful and low-maintenance asynchronous motor-
Extractor adapter for all wet-and-dry vacuum cleaners with 36 mm-
Plastic feet absorb vibrations and provide good stability-
Mounting holes enable stationary installation-
Easy-to-reach On/Off switch-
Complete with 45° stop, blade and push stick-
Complete with blade change tool-
Splitter and blade guard contribute to safety-
Technical Data
- Mains supply 230 V | 50 Hz
- Max. power (S2 | S2time) 800 W | 10 min
- Idle speed 2950 min^-1
- Saw blade Ø200 x ø16 mm
- Number of saw teeth 24 Pieces
- Swiveling range of saw blade 45 °
- Max. cutting height at 45° 35 mm
- Max. cutting height at 90° 45 mm
- Diameter of suction adapter 36 mm
- Size of working table 500 x 335 mm
Logistic Data
- Product weight 10.65 kg
- Gross weight single packaging 12.4 kg
- Dimensions single packaging 515 x 355 x 285 mm
- Pieces per export carton 1 Pieces
- Gross weight export carton 12.7 kg
- Dimensions export carton 515 x 355 x 285 mm
- Container quantity (20"/40"/40"HC) 490 | 1160 | 1310
Illustrations can contain accessories, which are not included in standard extent of delivery
Illustration similar (in design), production-wise modifications reserved
GS mark belongs to the product itself only, excluded accessory
Generated at: 08.02.2018 10:36
Page 1
Available as special accessories
HM-Sägeblatt 200x16x2,8mm 20Z
Stationary Saw Accessory
Item No.: 4502046
Bar Code: 4006825453706
Einhell Grey
Illustrations can contain accessories, which are not included in standard extent of delivery
Illustration similar (in design), production-wise modifications reserved
GS mark belongs to the product itself only, excluded accessory
Generated at: 08.02.2018 10:36
Page 2
  • Page 1 1
  • Page 2 2

EINHELL TC-TS 820 Product Sheet

Category
Video splitters
Type
Product Sheet

The EINHELL TC-TS 820 is a compact and powerful bench-type circular saw, ideal for DIY enthusiasts. It features a tilting saw blade for precision miter cutting, a parallel stop for clean cuts, and a scale on the table for fast adjustment. The saw is also equipped with a powerful and low-maintenance asynchronous motor, an extractor adapter for wet-and-dry vacuum cleaners, and plastic feet for vibration absorption and stability.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI