Aaeon PICO-BSW1 User manual

Category
Motherboards
Type
User manual

Aaeon PICO-BSW1 is a compact and versatile Pico-ITX board designed to offer a wide range of industrial and embedded computing applications. With its small size, low power consumption, and rich I/O features, the PICO-BSW1 is ideal for space-constrained environments. It supports Intel® Atom™ processors and features DDR3L memory, SATA storage, and various expansion options. Additionally, the board includes a variety of onboard peripherals, including USB ports, LVDS display output, and audio I/O.

Aaeon PICO-BSW1 is a compact and versatile Pico-ITX board designed to offer a wide range of industrial and embedded computing applications. With its small size, low power consumption, and rich I/O features, the PICO-BSW1 is ideal for space-constrained environments. It supports Intel® Atom™ processors and features DDR3L memory, SATA storage, and various expansion options. Additionally, the board includes a variety of onboard peripherals, including USB ports, LVDS display output, and audio I/O.

Last Updated: December 18, 2020
PICO-BSW1
Pico-ITX Board
Users Manual 7
th
Ed
Preface II
Pico-ITX Board PICO-BSW1
Copyright Notice
This document is copyrighted, 2020. All rights are reserved. The original manufacturer
reserves the right to make improvements to the products described in this manual at
any time without notice.
No part of this manual may be reproduced, copied, translated, or transmitted in any
form or by any means without the prior written permission of the original
manufacturer. Information provided in this manual is intended to be accurate and
reliable. However, the original manufacturer assumes no responsibility for its use, or for
any infringements upon the rights of third parties that may result from its use.
The material in this document is for product information only and is subject to change
without notice. While reasonable efforts have been made in the preparation of this
document to assure its accuracy, AAEON assumes no liabilities resulting from errors or
omissions in this document, or from the use of the information contained herein.
AAEON reserves the right to make changes in the product design without notice to its
users.
Preface III
Pico-ITX Board PICO-BSW1
Acknowledgement
All other products’ name or trademarks are properties of their respective owners.
Microsoft Window is a registered trademark of Microsoft Corp.
Intel®, Pentium® and Celeron® are registered trademarks of Intel Corporation
Intel Atom™ is a registered trademark of Intel Corporation
ITE is a trademark of Integrated Technology Express, Inc.
IBM, PC/AT, PS/2, and VGA are trademarks of International Business Machines
Corporation.
All other product names or trademarks are properties of their respective owners.
Preface IV
Pico-ITX Board PICO-BSW1
Packing List
Before setting up your product, please make sure the following items have been
shipped:
Item
Quantity
PICO-BSW1
1
Heat Spreader
1
COM + Line-out Cable
1
If any of these items are missing or damaged, please contact your distributor or sales
representative immediately.
Preface V
Pico-ITX Board PICO-BSW1
About this Document
This User’s Manual contains all the essential information, such as detailed descriptions
and explanations on the product’s hardware and software features (if any), its
specifications, dimensions, jumper/connector settings/definitions, and driver installation
instructions (if any), to facilitate users in setting up their product.
Users may refer to the product page on AAEON.com for the latest version of this
document.
Preface VI
Pico-ITX Board PICO-BSW1
Safety Precautions
Please read the following safety instructions carefully. It is advised that you keep this
manual for future references
1. All cautions and warnings on the device should be noted.
2. Make sure the power source matches the power rating of the device.
3. Position the power cord so that people cannot step on it. Do not place anything
over the power cord.
4. Always completely disconnect the power before working on the systems
hardware.
5. No connections should be made when the system is powered as a sudden rush
of power may damage sensitive electronic components.
6. If the device is not to be used for a long time, disconnect it from the power
supply to avoid damage by transient over-voltage.
7. Always disconnect this device from any AC supply before cleaning.
8. While cleaning, use a damp cloth instead of liquid or spray detergents.
9. Make sure the device is installed near a power outlet and is easily accessible.
10. Keep this device away from humidity.
11. Place the device on a solid surface during installation to prevent falls
12. Do not cover the openings on the device to ensure optimal heat dissipation.
13. Watch out for high temperatures when the system is running.
14. Do not touch the heat sink or heat spreader when the system is running
15. Never pour any liquid into the openings. This could cause fire or electric shock.
16. As most electronic components are sensitive to static electrical charge, be sure to
ground yourself to prevent static charge when installing the internal components.
Use a grounding wrist strap and contain all electronic components in any
static-shielded containers.
Preface VII
Pico-ITX Board PICO-BSW1
17. If any of the following situations arises, please the contact our service personnel:
i. Damaged power cord or plug
ii. Liquid intrusion to the device
iii. Exposure to moisture
iv. Device is not working as expected or in a manner as described in
this manual
v. The device is dropped or damaged
vi. Any obvious signs of damage displayed on the device
18. DO NOT LEAVE THIS DEVICE IN AN UNCONTROLLED ENVIRONMENT WHERE
THE STORAGE TEMPERATURE IS BELOW -20° C (-4°F) OR ABOVE 60°C (140°F)
TO PREVENT DAMAGE.
Preface VIII
Pico-ITX Board PICO-BSW1
FCC Statement
This device complies with Part 15 FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received including interference that may cause
undesired operation.
Caution:
There is a danger of explosion if the battery is incorrectly replaced. Replace only with the
same or equivalent type recommended by the manufacturer. Dispose of used batteries
according to the manufacturer’s instructions and your local government’s recycling or
disposal directives.
Attention:
Il y a un risque d’explosion si la batterie est remplacée de façon incorrecte.
Ne la remplacer qu’avec le même modèle ou équivalent recommandé par le constructeur.
Recycler les batteries usées en accord avec les instructions du fabricant et les directives
gouvernementales de recyclage.
Preface IX
Pico-ITX Board PICO-BSW1
China RoHS Requirements (CN)
产品中有毒有害物质或元素名称及含量
AAEON Main Board/ Daughter Board/ Backplane
部件名称
有毒有害物质或元素
(Hg)
(Cd)
六价铬
(Cr(VI))
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
印刷电路板
及其电子组件
外部信号
连接器及线材
O:表示该有毒有害物质在该部件所有均质材料中的含量均在
SJ/T 11363-2006 标准规定的限量要求以下。
X:表示该有毒有害物质至少在该部件的某一均质材料中的含量超出
SJ/T 11363-2006 标准规定的限量要求。
备注:此产品所标示之环保使用期限,系指在一般正常使用状况下。
Preface X
Pico-ITX Board PICO-BSW1
China RoHS Requirement (EN)
Poisonous or Hazardous Substances or Elements in Products
AAEON Main Board/ Daughter Board/ Backplane
Component
Poisonous or Hazardous Substances or Elements
Lead
(Pb)
Mercury
(Hg)
Cadmium
(Cd)
Hexavalent
Chromium
(Cr(VI))
Polybrominated
Biphenyls
(PBB)
Polybrominated
Diphenyl Ethers
(PBDE)
PCB & Other
Components
O
O
O
O
O
Wires &
Connectors
for External
Connections
O
O
O
O
O
O
OThe quantity of poisonous or hazardous substances or elements found in each of the
component's parts is below the SJ/T 11363-2006-stipulated requirement.
X: The quantity of poisonous or hazardous substances or elements found in at least one of the
component's parts is beyond the SJ/T 11363-2006-stipulated requirement.
Note: The Environment Friendly Use Period as labeled on this product is applicable under normal
usage only
Preface XI
Pico-ITX Board PICO-BSW1
Table of Contents
Chapter 1 - Product Specifications.......................................................................................... 1
1.1 Specifications ............................................................................................................ 2
Chapter 2 Hardware Information ....................................................................................... 5
2.1 Dimensions ............................................................................................................... 6
2.2 Jumpers and Connectors ...................................................................................... 10
2.3 List of Jumpers ........................................................................................................ 12
2.3.1 Auto Power Button and Clear CMOS Jumper (JP1) ........................... 13
2.3.2 LVDS Port VDD and Backlight Inverter VCC Selection (JP2) ............ 13
2.3.3 LVDS Port Backlight Control Mode Selection (JP3) ........................... 13
2.3.4 COM2 Pin8 Function Selection (JP4) .................................................... 13
2.4 List of Connectors ...................................................................................................14
2.4.1 Front Panel Connector (JP16) ................................................................. 15
2.4.2 USB Ports 0 and 1 (CN1) .......................................................................... 15
2.4.3 RTC Battery (CN3) .................................................................................... 16
2.4.4 LVDS Port Inverter / Backlight Connector (CN5) ............................... 17
2.4.5 LVDS Port (CN6)........................................................................................ 17
2.4.6 BIO Connector (CN8) .............................................................................. 19
2.4.7 LAN (RJ-45) Port (CN9) ........................................................................... 21
2.4.8 Mini-Card Slot (Half-Mini Card) (CN10) ............................................... 21
2.4.9 SATA Port (CN11) ...................................................................................... 24
2.4.10 +5V Output for SATA HDD (CN12) ...................................................... 25
2.4.11 MiniCard Slot (Full-Mini Card) (CN13) ................................................. 25
2.4.12 Digital IO Port (CN18) ............................................................................. 27
2.4.13 LPC Port (CN20) ....................................................................................... 28
2.4.14 COM Port & Audio I/O Connector (CN21)......................................... 30
2.4.15 External +12V Input (CN22) ................................................................... 32
Preface XII
Pico-ITX Board PICO-BSW1
2.4.16 HDMI Port (CN24) ................................................................................... 32
Chapter 3 - AMI BIOS Setup ................................................................................................ 34
3.1 System Test and Initialization .............................................................................. 35
3.2 AMI BIOS Setup ..................................................................................................... 36
3.3 Setup Submenu: Main .......................................................................................... 37
3.4 Setup Submenu: Advanced ................................................................................. 38
3.4.1 Advanced: CPU configuration .............................................................. 40
3.4.2 Advanced: SATA Configuration ............................................................. 42
3.4.3 Advanced: USB Configuration .............................................................. 43
3.4.4 Advanced: SIO Configuration ............................................................... 44
3.4.4.1 SIO Configuration: Serial Port 1 / 2 Configuration ................ 45
3.4.5 Advanced: Hardware Monitor .............................................................. 47
3.4.6 Advanced: CSM Configuration ............................................................. 48
3.4.7 Advanced: Power Management ........................................................... 50
3.4.8 Advanced: Digital IO Port Configuration ............................................ 52
3.5 Setup submenu: Chipset ...................................................................................... 53
3.5.1 Chipset: North Bridge ............................................................................. 54
3.5.1.1 North Bridge: LVDS Panel Configuration ................................ 56
3.5.2 Chipset: South Bridge ............................................................................. 58
3.6 Setup submenu: Security ..................................................................................... 59
3.7 Setup submenu: Boot ........................................................................................... 60
3.7.1 Boot: BBS Priorities ................................................................................... 61
3.8 Setup submenu: Save & Exit ............................................................................... 62
Chapter 4 Drivers Installation ............................................................................................ 63
4.1 Driver Download/Installation .............................................................................. 64
Appendix A - I/O Information .............................................................................................. 66
A.1 I/O Address Map ................................................................................................... 67
A.2 Memory Address Map ......................................................................................... 70
Preface XIII
Pico-ITX Board PICO-BSW1
A.3 IRQ Mapping Chart ................................................................................................ 71
Appendix B Electrical Specifications for I/O Ports .......................................................... 82
B.1 Electrical Specifications for I/O Ports ................................................................. 83
Appendix C Mating Connectors ....................................................................................... 84
C.1 List of Mating Connectors and Cables .............................................................. 85
Pico-ITX Board PICO-BSW1
Chapter 1
Chapter 1 - Product Specifications
Chapter 1 Product Specifications 2
Pico-ITX Board PICO-BSW1
1.1 Specifications
System
Form Factor
Pico-ITX
CPU
Intel® N3160 Quad Core 1.6GHz (6W), Intel®
N3060 Dual Core 1.6GHz (6W), Intel®
X5-E8000 Quad Core 1.04GHz (5W)
CPU Frequency
Up to 2.24 GHz
Chipset
Intel® N3160 Quad Core 1.6GHz (6W), Intel®
N3060 Dual Core 1.6GHz (6W), Intel®
X5-E8000 Quad Core 1.04GHz (5W)
Memory Type
204-pin DDR3L SODIMM x 1, DDR3L 1600,
Max. 8GB
Max. Memory Capacity
Up to 8GB
BIOS
AMI/SPI
Wake On LAN
Yes
Watchdog Timer
255 Levels
Power Requirement
+12V DC
Power Supply Type
AT/ATX (default) optional lockable connector
Power Consumption (Typical)
Intel® Pentium® N3160@ DDR3L-1600MHz
8GB, 0.91A@+12V
System Cooling
Heat-spreader; Heat-sink & cooler (optional)
Dimension
3.94" x 2.84" (100mm x 72mm)
Gross Weight
0.44 lb (0.2 kg)
Chapter 1 Product Specifications 3
Pico-ITX Board PICO-BSW1
System
Operating Temperature
32˚F ~ 140˚F (0˚C ~ 60˚C)
Storage Temperature
-40˚F ~ 176˚F (-40˚C ~ 80˚C)
Operating Humidity
0% ~ 90% relative humidity, non-condensing
MTBF (Hours)
100,000
Certification
CE,FCC
Display
Chipset
Intel® N3160 Quad Core 1.6GHz (6W)
Intel® N3060 Dual Core 1.6GHz (6W)
Intel® X5-E8000 Quad Core 1.04GHz (5W)
Resolution
LVDS (18/24bit 2CH) 1920 x 1200
HDMI up to 3840 x 2160 (4K)
DDI (optional by BIO board)
LCD Interface
18/24-bit 2CH LVDS
I/O
Storage/SSD
SATA 6.0Gb/s x 1, mSATA/MiniCard (Full size) x
1
Ethernet
Realtek RTL 8111E, 10/100/1000Base-TX, RJ-45 x
1
USB Port
USB 3.0 x 2 Rear I/O
Serial Port
COM1: RS-232 x 1, COM2: RS-232/422/485 x 1
(Ring/ +5V/ +12V)
Audio
Line-out x 1
Chapter 1 Product Specifications 4
Pico-ITX Board PICO-BSW1
I/O
DIO
4-bit (2-in, 2-out)
Expansion Slot
Mini Card(Half-size) x 1, BIO x 1, I2C x 1 or
Smbus x 1, LPC
SIM
TPM
Touch
Pico-ITX Board PICO-BT01
Chapter 2
Chapter 2 Hardware Information
Chapter 2 Hardware Information 6
Pico-ITX Board PICO-BSW1
2.1 Dimensions
Component Side
Component Side
Solder Side
Chapter 2 Hardware Information 7
Pico-ITX Board PICO-BSW1
Solder Side
Component Side
Solder Side
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98

Aaeon PICO-BSW1 User manual

Category
Motherboards
Type
User manual

Aaeon PICO-BSW1 is a compact and versatile Pico-ITX board designed to offer a wide range of industrial and embedded computing applications. With its small size, low power consumption, and rich I/O features, the PICO-BSW1 is ideal for space-constrained environments. It supports Intel® Atom™ processors and features DDR3L memory, SATA storage, and various expansion options. Additionally, the board includes a variety of onboard peripherals, including USB ports, LVDS display output, and audio I/O.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI