Aaeon PICO-CV01 User manual

PICO-ITX Board PICO-CV01

PICO-CV01

Intel

®

Atom™N2600 Processor

Gigabit Ethernet

5 USB 2.0, 2 COM

4-bit Digital I/O

mSATA/Mini Card (Half-size) x 1

1 SATA 3.0Gb/s

PICO-CV01 Manual Rev.A 1st Ed.

June 2012

PICO-ITX Board PICO-CV01

Copyright Notice

This document is copyrighted, 2012. All rights are reserved. The

original manufacturer reserves the right to make improvements to

the products described in this manual at any time without notice.

No part of this manual may be reproduced, copied, translated, or

transmitted in any form or by any means without the prior written

permission of the original manufacturer. Information provided in this

manual is intended to be accurate and reliable. However, the

original manufacturer assumes no responsibility for its use, or for

any infringements upon the rights of third parties that may result

from its use.

The material in this document is for product information only and is

subject to change without notice. While reasonable efforts have

been made in the preparation of this document to assure its

accuracy, AAEON assumes no liabilities resulting from errors or

omissions in this document, or from the use of the information

contained herein.

AAEON reserves the right to make changes in the product design

without notice to its users.

i

PICO-ITX Board PICO-CV01

Acknowledgments

All other products’ name or trademarks are properties of their

respective owners.

 AMI is a trademark of American Megatrends Inc.

 Intel

®

and Atom are trademarks of Intel

®

Corporation.

 Microsoft Windows

®

is a registered trademark of Microsoft

Corp.

 ITE is a trademark of Integrated Technology Express, Inc.

 IBM, PC/AT, PS/2, and VGA are trademarks of International

Business Machines Corporation.

 SoundBlaster is a trademark of Creative Labs, Inc.

Please be notified that all other products’ name or trademarks

not be mentioned above are properties of their respective

owners.

ii

PICO-ITX Board PICO-CV01

Packing List

Before you begin installing your card, please make sure that

the following materials have been shipped:

 1 Heatsink

 1 SATA Power Cable

 1 Power Cable

 1 SATA Cable

 1 CD-ROM for Manual (in PDF Format) and

Drivers

 1 PICO-CV01

If any of these items should be missing or damaged, please

contact your distributor or sales representative immediately.

iii

PICO-ITX Board PICO-CV01

Contents

Chapter 1 General Information

1.1 Introduction................................................................1-2

1.2 Features....................................................................1-3

1.3 Specifications............................................................1-4

Chapter 2 Quick Installation Guide

2.1 Safety Precautions ..................................................2-2

2.2 Location of Connectors and Jumpers ......................2-3

2.3 Mechanical Drawing ................................................2-5

2.4 List of Jumpers ........................................................2-7

2.5 List of Connectors .....................................................2-8

2.6 Setting Jumpers .......................................................2-9

2.7 COM2 Pin8 Function Selection (JP1) .....................2-10

2.8 Clear CMOS Selection (JP2) ..................................2-10

2.9 LVDS Port 1 Backlight Inverter VCC Selection (JP3)

.......................................................................................2-10

2.10 LVDS Port 1 Backlight Lightness Control Mode

Selection (JP4)..............................................................2-11

2.11 LVDS Port 1 Operating VDD Selection (JP5).......2-11

2.12 AT/ATX Power Supply Mode Selection (JP6).......2-11

2.13 COM Port 1 Connector (CN1)...............................2-12

2.14 COM Port 2 Connector (CN2)...............................2-13

2.15 DIO Connector (CN2)............................................2-14

2.16 +5V Output for SATA HDD Connector (CN4).......2-15

iv

PICO-ITX Board PICO-CV01

2.17 SATA Port Connector (CN5).................................2-16

2.18 External 12V Input Only Connector (CN6)............2-16

2.19 Realtek LAN Port RJ-45 Connector (CN7) ...........2-17

2.20 Buzzer Connector (CN8).......................................2-17

2.21 Audio I/O Port Connector (CN9) ...........................2-18

2.22 LPC Port Connector (CN10) .................................2-19

2.23 USB2.0 Port 5 Connector (CN11).........................2-20

2.24 VGA Port Connector (CN12).................................2-20

2.25 USB2.0 Port 3 Connector (CN13).........................2-21

2.26 USB2.0 Port 4 Connector (CN14).........................2-22

2.27 18-bit LVDS Output Connector (CN15).................2-22

2.28 USB Port 1 and Port 2 Connector (CN16)............2-23

2.29 HDMI Type C Connector (CN17)..........................2-24

2.30 LVDS Port Inverter/ Backlight Connector (CN18).2-25

2.31 Front Panel Connector (CN19) .............................2-26

2.32 DDR3 SODIMM Slot (DIMM1) ..............................2-26

2.33 Mini Card Slot (PCIE1)..........................................2-26

Chapter 3 AMI BIOS Setup

3.1 System Test and Initialization. ..................................3-2

3.2 AMI BIOS Setup........................................................3-3

Chapter 4 Driver Installation

4.1 Installation……………………………………………..4-3

Appendix A Programming The Watchdog Timer

A.1 Watchdog Timer Registers....................................A-2

v

PICO-ITX Board PICO-CV01

vi

A.2 Watchdog Sample Program...................................A-3

Appendix B I/O Information

B.1 I/O Address Map....................................................B-2

B.2 Memory Address Map............................................B-4

B.3 IRQ Mapping Chart................................................B-5

B.4 DMA Channel Assignments.……………………….B-7

Appendix C Mating Connector

C.1 List of Mating Connectors and Cables.................. C-2

Appendix D AHCI Settings

D.1 Setting AHCI......................................................... D-2

Appendix E Electrical Specifications for I/O Ports

E.1 Electrical Specifications for I/O Ports.....................E-2

E.2 DIO Programming..................................................E-3

E.3 Digital I/O Register.................................................E-4

E.4 Digital I/O Sample Program...................................E-5

PICO-ITX Board PICO-CV01

Chapter 1 General Information 1- 1

General

Chapter

1

Information

PICO-ITX Board PICO-CV01

Chapter 1 General Information 1-2

1.1 Introduction

The PICO-CV01 is the first embedded board with PICO-ITX

form factor AAEON developed. It supports Intel

®

Atom™

N2600 processor up to 1.6 GHz. Moreover, it equips Intel

®

NM10 chipset offers a high performance computing platform

with low power consumption. This new product supports

DDR3 SODIMM at speeds of 800 MHz, up to 2 GB.

One SATA 3.0Gb/s and one mSATA interfaces provide ample

storages. With one Gigabit Ethernet, two COM ports, and five

USB2.0, the PICO-CV01 meets the requirements of today’s

demanding applications.

Display requirements are met with an abundance of interfaces

such as VGA, HDMI, and LVDS. In addition, the PICO-CV01

supports 18-bit Single Channel LVDS with PWM function.

With all of its integrated features, the PICO-CV01 strikes a

balance of performance and price. This versatile product targets

Industrial Automation, Entertainment, Networking, KIOSK/POS,

Transportation, Banking, Healthcare and Digital Signage

applications that require high performance and high reliability.

PICO-ITX Board PICO-CV01

Chapter 1 General Information

1-3

1.2 Features

 Intel

®

Atom™ N2600 Processor Up to 1.6 GHz

 Intel

®

NM10

 SODIMM DDR3 800 MHz Memory Up to 2 GB

 Gigabit Ethernet x 1

 HDMI Support

 18-bit Single Channel LVDS LCD

 HD Audio for Line-in/out & MIC

 mSATA/ Mini Card (Half-size) x 1, SATA 3.0Gb/s x

1

 USB2.0 x 5, COM x 2, 4-bit Digital I/O

 DC 12V Power Input

PICO-ITX Board PICO-CV01

Chapter 1 General Information 1-4

1.3 Specifications

System

 From Factor

PICO-ITX

 Processor

Intel

®

Atom™ N2600 processor up

to 1.6 GHz

 System Memory

SODIMM DDR3 800 MHz, up to 2

GB

 Chipset

Intel

®

Atom N2600 + NM10

 Ethernet

Realtek RTL-8111E,

10/100/1000Base-TX, RJ-45 x 1

 BIOS

AMI BIOS-32 Mb ROM

 Wake On LAN

Yes

 Watchdog Timer

255 levels

 H/W Status

Monitoring

Vcore, +1.5V_DDR

 Expansion Interface

mSATA/ Mini Card (Half-size) x 1

 Battery

Lithium Battery

 Power Requirement

DC 12V, AT/ATX (Default)

 Board Size

3.94" x 2.756" (100mm x 72mm)

 Gross Weight

1.7 lb (0.77 Kg)

 Operating

Temperature

32°F~140°F (0°C~60°C)

 Storage Temperature

-40°F~176°F (-40°C~80°C)

 Operating Humidity

0% ~ 90% relative humidity,

non-condensing

PICO-ITX Board PICO-CV01

Chapter 1 General Information

1-5

Display: Supports CRT/LCD, HDMI/DVI/LCD simultaneous /

dual v

iew displays

 Chipset

Intel

®

Atom™ N2600 Processor

 Memory

Shared system memory up to

256MB

 Resolution

Up to 1366 x 768 (18-bit) @ 60 Hz

for LVDS;

Up to 1920 x 1200 @ 60 Hz for

CRT and HDMI

 LCD Interface

18-bit single channel LVDS with

PWM function

I/O: Fintek F81801U-I

 Storage

SATA 3.0Gb/s x 1 , mSATA x 1

 Serial Port

RS-232 x 1

RS-232/422/485 x 1

 USB

USB2.0 x 5

 Digital I/O

4-bit Programmable (2-in/ 2-out)

 Audio

Buzzer x 1, HD Audio Codec

(Realtek ALC662) for Line-in/out &

MIC x 1

PICO-ITX Board PICO-CV01

Chapter 2 Quick Installation Guide 2-1

Quick

Installation

Guide

Chapter

2

PICO-ITX Board PICO-CV01

Chapter 2 Quick Installation Guide 2-2

2.1 Safety Precautions

Always completely disconnect the power cord

from your board whenever you are working on

it. Do not make connections while the power is

on, because a sudden rush of power can

damage sensitive electronic components.

Always ground yourself to remove any static

charge before touching the board. Modern

electronic devices are very sensitive to static

electric charges. Use a grounding wrist strap at

all times. Place all electronic components on a

static-dissipative surface or in a static-shielded

bag when they are not in the chassis

PICO-ITX Board PICO-CV01

Chapter 2 Quick Installation Guide 2-3

2.2 Location of Connectors and Jumpers

Component Side

PICO-ITX Board PICO-CV01

Chapter 2 Quick Installation Guide 2-4

Solder Side

PICO-ITX Board PICO-CV01

Chapter 2 Quick Installation Guide 2-5

2.3 Mechanical Drawing

Component Side

PICO-ITX Board PICO-CV01

Chapter 2 Quick Installation Guide 2-6

Solder Side

PICO-ITX Board PICO-CV01

Chapter 2 Quick Installation Guide 2-7

2.4 List of Jumpers

The board has a number of jumpers that allow you to configure your

system to suit your application.

The table below shows the function of each of the board's jumpers:

Label Function

JP1 COM2 RI/+5/+12V Selection

JP2 Clear CMOS

JP3 LVDS Inverter/ Backlight Voltage Selection

JP4 LVDS Inverter/ Backlight Bias/PWM Mode Selection

JP5 LVDS Operating Voltage Selection

JP6 AT/ATX Power Mode Selection

PICO-ITX Board PICO-CV01

Chapter 2 Quick Installation Guide 2-8

2.5 List of Connectors

The board has a number of connectors that allow you to configure your

system to suit your application. The table below shows the function of

each board's connectors:

Label 0B0BFunction

CN1 COM Port 1

CN2 COM Port 2

CN3 Digital I/O

CN4 +5V Output for SATA HDD

CN5 SATA Port

CN6 External 12V Input (12V Only)

CN7 RJ-45 Ethernet

CN8 Buzzer

CN9 Audio Line In/Out and MIC Connector

CN10 LPC Expansion I/F

CN11 USB Port 5

CN12 Analog CRT Display

CN13 USB Port 3

CN14 USB Port 4

CN15 18-bit LVDS Output

CN16 USB Port 1 and 2

CN17 HDMI Type C

CN18 LVDS Inverter/ Backlight Connector

CN19 Front Panel

Page is loading ...

Aaeon PICO-CV01 User manual

Aaeon PICO-CV01 User manual

Related papers

Other documents