2. Computers & electronics
  3. Networking
  4. Network media converters
  5. IMC Networks
  6. TP-TX/FX-CWDM-SM1270-SC

IMC Networks TP-TX/FX-CWDM-SM1270-SC User manual

  • Hello! I am an AI chatbot trained to assist you with the IMC Networks TP-TX/FX-CWDM-SM1270-SC User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
IE-Mini-FiberLinX-II Modes of Operations
NO
Transparent
Mode
VLAN Filter
YES Uplink TAG
YES Data TAG
Port VLAN
Data
NO Uplink TAG
YES Data TAG
Port VLAN
Uplink
YES Uplink TAG
NO Data TAG
Default
No Uplink TAG
No Data TAG
Sl t
NO NO
NO
Default Plus
No Uplink TAG
No Data TAG
NO (3)
YES
YESNO
Set MGMT TAG Value
Set MGMT TAG PRI
Set MGMT TAG Value
Set MGMT TAG PRI
Set MGMT TAG Value
Set MGMT TAG PRI
YES (1)
S
e
l
ec
t
“config”
YES YES YES
UN-TAGGED MGMT
Pass
UN-TAGGED DATA
UN-TAGGED MGMT
Pass
UN-TAGGED DATA
TAGGED DATA
Yes/No to allow MGMT
YES (2)
TAG Required
on MGMT
Packet
Set MGMT TAG Value
Set MGMT TAG PRI
YES
TAG Required (Exists)
on EXT MGMT Port
Yes / No to add TAG
TAGGED MGMT
Up to 32 VLAN values to pass
TAG Required (Exists)
on EXT MGMT Port
Yes / No to add TAG
TAG Required (Exists)
on EXT MGMT Port
Yes / No to add TAG
TAGGED MGMT
Set TAG/PRI Value of
TAG from Data to Uplink
NO
Yes/No
to
allow
MGMT
on Copper port
Add Extra TAG
Set Extra TAG Value
Set Extra TAG PRI
MGMT and Data
YES
Up
to
32
VLAN
values
to
pass
VLAN FILTER
DATA VLAN
TAGGED MGMT
Set TAG/PRI Value of
TAG from Uplink to Data
UN-TAG from Data to U
p
link
TAG
from
Data
to
Uplink
UN-TAG from Uplink to Data
NO
Set Extra TAG Value
Set Extra TAG PRI
MGMT and Data
Add Extra TAG
YESNO
TAG Required (Exists)
on EXT MGMT Port
Yes / No to add TAG
p
Pass only Extra TAG
Keep EX-TAG on Data
Port (YES/NO)
Set TPID for Extra TAG
(S E h T )
PlEtTAG
TAG Required (Exists)
on EXT MGMT Port
Yes / No to add TAG
Pass UN-Tagged Data if
UN-TAGGED MGMT
Pass TAGGED DATA
(S
et
E
t
h
er
T
ype
)
P
ass on
l
y
E
x
t
ra
TAG
Keep EX-TAG on Data
Port (YES/NO)
Set TPID for Extra TAG
(Set EtherType)
UN-TAGGED MGMT
Pass TAGGED DATA
Add/Remove Extra TAG (QinQ) on Data to Uplink
MGMT from Data Port only if in KEEP EX-TAG
independent of switches
TAGGED MGMT
Pass TAGGED / UN-TAGGED DATA
on
y
rom
port
(Dip switches) or UMA
independent
of
switches
TAGGED MGMT
Pass TAGGED / UN-TAGGED DATA
Add/Remove Extra TAG (QinQ) on Data to Uplink
MGMT from Data Port only if in KEEP EX-TAG
independent of switches
© 2009 IMC Networks. All rights reserved. Information
is subject to change without notice.
/