NEC EA192M User manual

Brand: NEC

Model: EA192M

Category: LED displays

Type: User manual

NEC EA192M is a reliable, high-quality monitor perfectly suitable for both office and home use. Its 19-inch screen with 1280 x 1024 resolution guarantees sharp and detailed images. Several digital and analog inputs (DVI-D, DisplayPort, D-SUB) ensure compatibility with various devices such as PCs and laptops. The monitor features an Auto Brightness function that automatically adjusts the screen's brightness to ambient light conditions. In combination with the TCO Displays 5 certification, it provides comfortable viewing even during extended work sessions.

MultiSync EA192M

User’s Manual

Index

Warning, Caution .........................................................................................................................English-1

Registration Information ...............................................................................................................English-1

Recommended use ......................................................................................................................English-3

Contents .......................................................................................................................................English-5

Quick Start ...................................................................................................................................English-6

Controls ......................................................................................................................................English-10

Specifications .............................................................................................................................English-14

Features .....................................................................................................................................English-15

Troubleshooting .........................................................................................................................English-16

Using the Auto Brightness function ............................................................................................English-17

TCO Displays 5 ..........................................................................................................................English-18

Manufacturer’s Recycling and Energy Information ....................................................................English-19

English

English-1

WARNING

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM

WALL SOCKET. TO FULLY DISENGAGE THE POWER TO THE UNIT, PLEASE DISCONNECT THE

POWER CORD FROM THE AC OUTLET. DO NOT REMOVE COVER (OR BACK). NO USER

SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol warns user that uninsulated voltage within the unit may have sufficient magnitude to cause

electric shock. Therefore, it is dangerous to make any kind of contact with any part inside this unit.

This symbol alerts the user that important literature concerning the operation and maintenance of this unit

has been included. Therefore, it should be read carefully in order to avoid any problems.

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT

USE THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS

THE PRONGS CAN BE FULLY INSERTED.

REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

Declaration of the Manufacturer

We hereby certify that the colour monitor MultiSync

EA192M (L190NY) is in compliance with

Council Directive 2006/95/EC:

– EN 60950-1

Council Directive 2004/108/EC:

– EN 55022

– EN 61000-3-2

– EN 61000-3-3

– EN 55024

Council Directive 2009/125/EC:

EC No.1275/2008

– EN 62301:2005

and marked with

NEC Display Solutions, Ltd.

4-13-23, Shibaura,

Minato-Ku

Tokyo 108-0023, Japan

CAUTION: Please use the power cord provided with this display in accordance with the table below. If a power cord is not

supplied with this equipment, please contact your supplier. For all other cases, please use a power cord that matches the

AC voltage of the power outlet and has been approved by and complies with the safety standard of your particular country.

Plug Type North America

European

Continental

U.K. Chinese Japanese

Plug Shape

Country

Voltage

U.S.A./Canada U.K. China JapanEU (except U.K.)

120* 230 220 100230

*When operating the MultiSync EA192M monitor with its AC 125-240V power supply, use a power supply cord that matches

the power supply voltage of the AC power outlet being used.

NOTE: This product can only be serviced in the country where it was purchased.

Registration Information

Declaration

English-2

Canadian Department of Communications Compliance Statement

DOC: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to CAN/CSA C22.2 No. 60950-1.

FCC Information

1. Use the attached specified cables with the MultiSync EA192M (L190NY) color monitor so as not to interfere with radio

and television reception.

(1) The power supply cord you use must have been approved by and comply with the safety standards of U.S.A.,

and meet the following condition.

Power supply cord Non shield type, 3-conductor

Plug shape

U.S.A

(2) Please use the supplied shielded video signal cable, 15-pin mini D-SUB to D-SUB cable or DVI-D to DVI-D cable.

Use of other cables and adapters may cause interference with radio and television reception.

2. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged

to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult your dealer or an experienced radio/TV technician for help.

If necessary, the user should contact the dealer or an experienced radio/television technician for additional suggestions.

The user may find the following booklet, prepared by the Federal Communications Commission, helpful: “How to Identify

and Resolve Radio-TV Interference Problems.” This booklet is available from the U.S. Government Printing Office,

Washington, D.C., 20402, Stock No. 004-000-00345-4.

Declaration of Conformity

This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions. (1) This device may not

cause harmful interference, and (2) this device must accept any interference received, including interference that may cause

undesired operation.

U.S. Responsible Party: NEC Display Solutions of America, Inc.

Address: 500 Park Blvd, Suite 1100

Itasca, Illinois 60143

Tel. No.: (630) 467-3000

Type of Product: Display Monitor

Equipment Classification: Class B Peripheral

Models: MultiSync EA192M (L190NY)

We hereby declare that the equipment specified above conforms

to the technical standards as specified in the FCC Rules.

Windows is a registered trademark of Microsoft Corporation. NEC is a registered trademark of NEC Corporation.

ENERGY STA R is a U.S. registered trademark.

ErgoDesign is a registered trademark of NEC Display Solutions, Ltd. in Austria, Benelux, Denmark, France, Germany, Italy,

Norway, Spain, Sweden, U.K.

NaViSet is a trademark of NEC Display Solutions Europe GmbH in the countries of EU and Switzerland.

MultiSync is a registered trademark of NEC Display Solutions, Ltd. in the countries of U.K., Italy, Austria, Netherlands,

Switzerland, Sweden, Spain, Denmark, Germany, Norway and Finland.

All other brands and product names are trademarks or registered trademarks of their respective owners.

As an ENERGY STAR

Partner, NEC Display Solutions of America, Inc. has determined that this product meets

the ENERGY STA R guidelines for energy efficiency. The ENERGY STA R emblem does not represent EPA

endorsement of any product or service.

DisplayPort is trademarks of Video Electronics Standards Association.

English

English-3

Recommended use

Safety Precautions and Maintenance

FOR OPTIMUM PERFORMANCE, PLEASE NOTE

THE FOLLOWING WHEN SETTING UP AND USING

THE MULTISYNC LCD COLOUR MONITOR:

• DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose

you to dangerous shock hazards or other risks. Refer all servicing to qualified service personnel.

• Do not spill any liquids into the cabinet or use your monitor near water.

• Do not insert objects of any kind into the cabinet slots, as they may touch dangerous voltage points, which can be harmful

or fatal or may cause electric shock, fire or equipment failure.

• Do not place any heavy objects on the power cord. Damage to the cord may cause shock or fire.

• Do not place this product on a sloping or unstable cart, stand or table, as the monitor may fall, causing serious damage to

the monitor.

• The power supply cord you use must have been approved by and comply with the safety standards of your country.

(Type H05VV-F 3G 0.75mm

should be used in Europe).

• In U.K, use a BS-approved power cord with molded plug having a black (5A) fuse installed for use with this monitor.

• Do not place any objects onto the monitor and do not use the monitor outdoors.

• Do not bend, crimp or otherwise damage the power cord.

• Do not use monitor in high temperatured, humid, dusty, or oily areas.

• Do not cover vent on monitor.

• Do not touch LCD panel surface while transporting, mounting and setting. Applying pressure on the LCD panel can cause

serious damage.

• To prevent damage to the LCD monitor caused by tipping over due to earthquakes or other shocks, make sure to install

the monitor in a stable location and take measures to prevent falling.

Immediately unplug your monitor from the wall outlet and refer servicing to qualified service personnel under the following

conditions:

• When the power supply cord or plug is damaged.

• If liquid has been spilled, or objects have fallen into the monitor.

• If the monitor has been exposed to rain or water.

• If the monitor has been dropped or the cabinet damaged.

• If the monitor does not operate normally by following operating instructions.

• If glass is broken, handle with care.

• If monitor or glass is broken, do not come in contact with the liquid crystal and handle with care.

• If you notice any structural damage such as cracks or unnatural wobbling.

• Allow adequate ventilation around the monitor so that heat can properly dissipate. Do not block

ventilated openings or place the monitor near a radiator or other heat sources. Do not put anything on

top of monitor.

• The power cable connector is the primary means of detaching the system from the power supply.

The monitor should be installed close to a power outlet which is easily accessible.

• Handle with care when transporting. Save packaging for transporting.

• Do not carry holding only the stand.

• Image Persistence: Please be aware that LCD Technology may experience a phenomenon known as Image Persistence.

Image Persistence occurs when a residual or “ghost” image of a previous image remains visible on the screen. Unlike

CRT monitors, LCD monitors’ image persistence is not permanent, but constant images being displayed for a long period

of time should be avoided. To alleviate image persistence, turn off the monitor for as long as the previous image was

displayed. For example, if an image was on the monitor for one hour and a residual image remains, the monitor should be

turned off for one hour to erase the image.

NOTE: As with all personal display devices, NEC DISPLAY SOLUTIONS recommends displaying moving images and

using a moving screen saver at regular intervals whenever the screen is idle or turning off the monitor when not in use.

CAUTION

English-4

CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN

REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE

FOLLOWING WHEN YOU POSITION THE MONITOR:

• For optimum performance, allow 20 minutes for warm-up.

• Adjust the monitor height so that the top of the screen is at or slightly below eye level.

Your eyes should look slightly downward when viewing the middle of the screen.

• Position your monitor no closer than 40 cm and no further away than 70 cm from your

eyes. The optimal distance is 50 cm.

• Rest your eyes periodically by focusing on an object at least 20 feet away. Blink often.

• Position the monitor at a 90° angle to windows and other light sources to minimize glare

and reflections. Adjust the monitor tilt so that ceiling lights do not reflect on your screen.

• If reflected light makes it hard for you to see your screen, use an anti-glare filter.

• Adjust the monitor’s brightness and contrast controls to enhance readability.

• Use a document holder placed close to the screen.

• Position whatever you are looking at most of the time (the screen or reference material) directly in front of you to

minimize turning your head while you are typing.

• Avoid displaying fixed patterns on the monitor for long periods of time to avoid image persistence (after-image effects).

• Get regular eye checkups.

Ergonomics

To realize the maximum ergonomics benefits, we recommend the following:

• Adjust the Brightness until the background raster disappears.

• Do not position the Contrast control to its maximum setting.

• Use the preset Size and Position controls with standard signals.

• Use the preset Colour Setting.

• Use non-interlaced signals with a vertical refresh rate between 60-75 Hz.

• Do not use primary colour blue on a dark background, as it is difficult to see and may produce eye fatigue to insufficient

contrast.

Cleaning the LCD Panel

• When the liquid crystal panel is stained with dust or dirt, please wipe with soft cloth gently.

• Please do not rub the LCD panel with hard material.

• Please do not apply pressure to the LCD surface.

• Please do not use OA cleaner it will cause deterioration or discolor on the LCD surface.

Cleaning the Cabinet

• Unplug the power supply

• Gently wipe the cabinet with a soft cloth

• To clean the cabinet, dampen the cloth with a neutral detergent and water, wipe the cabinet and follow with a dry cloth.

NOTE: Many plastics are used on the surface of the cabinet. DO NOT clean with benzene, thinner, alkaline detergent,

alcoholic system detergent, glass cleaner, wax, polish cleaner, soap powder, or insecticide. Do not touch rubber or

vinyl to the cabinet for a long time. These types of fluids and fabrics can cause the paint to deteriorate, crack or

peel.

English

English-5

Contents

Your new NEC MultiSync LCD monitor box* should contain the following:

• MultiSync LCD monitor with tilt/swivel/pivot/height adjust base

• Power Cord

• Base stand

• Video Signal Cable (15-pin mini D-SUB male to 15-pin mini D-SUB male)

• Video Signal Cable (DVI-D to DVI-D)

• Audio Cable

• Setup Manual

Power Cord

(Type of power cord included

will depend on the where the

LCD monitor is to be shipped)

Setup Manual

15-pin mini D-SUB male to

15-pin mini D-SUB male

DVI-D to DVI-D

Remember to save your original box and packing material to transport or ship the monitor.

Setup Manual

Base stand

Audio Cable

English-6

Quick Start

To attach the Base to the LCD stand:

1. Place monitor face down on a non-abrasive surface (Figure 1).

NOTE: Handle with care when monitor facing down, for avoiding damage to the front

control buttons.

2. Please pivot base 90 degrees as shown in Figure 1.

NOTE: Handle with care when pulling the stand.

3. Attach the base stand to LCD monitor and properly lock screw of base stand bottom

(Figure 2).

NOTE: Reverse this procedure if you need to re-pack the monitor.

To attach the MultiSync LCD monitor to your system, follow these instructions:

1. Turn off the power to your computer.

2. For the PC or MAC with DVI digital output: Connect the DVI signal cable to the

connector of the display card in your system (Figure A.1). Tighten all screws.

For the PC with Analog output: Connect the 15-pin mini D-SUB signal cable to the

connector of the display card in your system (Figure A.2). Tighten all screws.

For the MAC: Connect the Macintosh cable adapter to the computer, then attach the

15-pin mini D-SUB signal cable to the Macintosh cable adapter (Figure A.3).

Tighten all screws.

For the PC with DisplayPort output: Connect the DisplayPort cable to the connector of the display card in your system

(Figure A.4).

NOTE: Some Macintosh systems do not require a Macintosh cable adapter.

3. Place hands on each side of the monitor to tilt the LCD panel 20-degree angle and lift up to the highest position (FigureB.1).

4. Connect all cables to the appropriate connector on the back of the monitor (Figure B.1). Connect the Headphone (not

included) to the appropriate connector at the left side of the monitor (Figure B.1).

5. Position the Video Signal Cable and power cord between the holes on the Stand, as indicated in Figure B.2/Figure B.3.

Figure B.2

Figure 2

Figure B.3

Figure 1

Control

buttons

Screw

Power Cord Audio Input

Figure B.1

Highest

stand position

20˚ Tilt

Headphone

DVI

D-Sub

Figure A.1

Figure A.3

Macintosh

Cable Adapter

(not included)

Figure A.2

DVI signal cable

Figure A.4

DisplayPort cable

(not included)

NOTE: 1. Please use a DisplayPort cable with a DisplayPort logo.

2. The DisplayPort connector does not supply power to the connected component.

3. When removing the DisplayPort cable, hold down the top button to release the lock.

DisplayPort

English

English-7

Raise and Lower Monitor Screen

The monitor may be raised or lowered. To raise or lower screen, place hands on each side of the monitor and lift or lower to

the desired height (Figure RL.1).

NOTE: Handle with care when raising or lowering the monitor screen.

Tilt and Swivel

Grasp both sides of the monitor screen with your hands and adjust the tilt and swivel as desired (Figure TS.1).

NOTE: Handle with care when tilting the monitor screen.

6. Connect the power cord to the power outlet (Figure C.1).

NOTE: Please refer to Caution section of this manual for proper selection of AC power cord.

7. Turn on the monitor with the front power button and the computer (Figure C.1).

8. No-Touch Auto Adjust automatically adjusts the monitor to optimal settings upon initial setup for most timings.

For further adjustments, use the following OSD controls:

• Auto Adjust Contrast (Analog input only)

• Auto Adjust (Analog input only)

Refer to the Controls section of this User’s Manual for a full description of these OSD controls.

NOTE: If you have any problems, please refer to the Troubleshooting section of this User’s Manual.

Figure C.1

Power Button

Figure RL.1

Figure TS.1

English-8

Remove Monitor Stand for Mounting

To prepare the monitor for alternate mounting purposes:

1. Disconnect all cables.

2. Place monitor face down on a non-abrasive surface (Figure S.1).

NOTE: Handle with care when monitor facing down, for avoiding damage to the front control buttons.

3. Remove the 4 screws connecting the stand to the monitor (Figure S.1).

NOTE: In order to avoid stand drop, when removing screws, please support stand with your hand.

Screen Rotation

Before rotating, the screen must be raised to the highest level to avoid knocking the screen on the desk or pinching with your

fingers.

To raise the screen, with one hand, grip the top of the display by the handle using the other hand to grip the bottom. Lift up to

the highest position (Figure RL.1).

To rotate screen, place hands on each side of the monitor screen and turn clockwise from Landscape to Portrait or counter-

clockwise from Portrait to Landscape (Figure R.1).

Figure R.1

Figure S.1

Figure S.2

Control buttons

4. Remove the stand (Figure S.2).

5. The monitor is now ready for mounting in an alternate manner.

6. Connect the cables to the back of the monitor.

English

English-9

7. Reverse this process to re-attach stand.

NOTE: Use only VESA-compatible alternative mounting method.

Handle with care when removing stand.

NOTE: Match “TOP SIDE” mark on stand to top side of the monitor head when

re-attaching stand.

Flexible Arm Installation

This LCD monitor is designed for use with a flexible arm. To mount the monitor to a flexible arm:

1. Follow the instructions on how Remove Monitor Stand for Mounting to remove the stand.

2. Using the 4 screws from the stand removal, attach the arm to the monitor (Figure F.1).

NOTE: 1. When mounting, use ONLY the screws (4 pcs) that were removed from the stand to avoid damage to the monitor

or stand.

2. The LCD monitor should only be used with an approved arm (e.g. GS mark). To meet the safety requirements,

the monitor must be mounted to an arm, which guaranties the necessary stability under consideration of the weight

of the monitor.

3.The mounting stand must be able to sustain at least 14 kg and be UL certified.

“TOP SIDE” mark

Please match top side

of the monitor

Thickness of Bracket (Arm)

2.0~3.2 mm

Weight of LCD assembly: 3.5 kg MAX

100 mm

Figure F.1

4 Screws (M4)

(Max Depth: 14 mm)

English-10

Controls

OSD (On-Screen Display) control buttons on the front of the monitor function

as follows:

To access OSD menu, press any of the control buttons (MENU, Left, Right, Down, Up).

To change signal input, press the SELECT button.

To change ECO MODE, press the RESET/ECO MODE button.

NOTE: OSD must be closed in order to change signal input.

NOTE: When RESET is pressed in the main and sub-menu, a warning window will appear allowing you to cancel the

RESET function by pressing the MENU button.

Brightness/Contrast Controls

BRIGHTNESS

Adjusts the overall image and background screen brightness.

If ECO MODE is set to ON, a bar for CARBON FOOTPRINT will appear.

CONTRAST

Adjusts the image brightness in relation to the background.

AUTO CONTRAST (Analog input only)

Adjusts the image displayed to optimal settings.

ECO MODE

Decreases the amount of power consumed by reducing the brightness level.

OFF: Set brightness variable from 0% to 100%.

(ECO MODE) 1: Set brightness variable range from 0% to 80%.

This setting can adjust brightness within the range that power has reduced meeting Energy Star measurement

condition.

(ECO MODE) 2: Set brightness variable range from 0% to 30%.

This setting can adjust brightness within the range that power has reduced 30% from maximum brightness setting.

When this function is set to ON, a bar for CARBON FOOTPRINT appear under the brightness adjustment bar.

NOTE: This function can’t work when DV mode is set for Dynamic.

Detects the level of ambient lighting allowing the monitor to make adjustments to various settings

resulting in a more comfortable viewing experience. Do not cover this sensor.

Open OSD main menu.

Exits the OSD controls.

Exits to the OSD main menu.

Moves the highlighted area left/right to select control menus.

Moves the bar left/right to increase or decrease the adjustment.

Direct adjust of BRIGHTNESS if HOT KEY is set to ON.

Enters the OSD menu if HOT KEY is set to OFF.

Moves the highlighted area down/up to select one of the controls.

Direct adjust of CONTRAST if HOT KEY is set to ON.

Enters the OSD menu if HOT KEY is set to OFF.

Enter the OSD sub menu. Active the selected function.

Change the Input source (No OSD condition).

Resets the highlighted control menu to the factory setting. Switches the ECO MODE.

Activates Auto Adjust function if pushed for 3 seconds (No OSD condition and Analog input only).

Turns the monitor on and off.

Button

1 Ambibright Sensor

2 MENU

3 4-Direction-Key Left/Right

Down/Up

4 SELECT

5 RESET/ECO MODE

6 Power

Down

RightLeft

English

English-11

AUTO BRIGHTNESS

OFF: No function.

(AUTO BRIGHTNESS) 1: Automatically adjusts the brightness to the optimal setting by detecting the brightness

level of the environment*

(AUTO BRIGHTNESS) 2: Automatically adjusts the brightness to the optimal brightness setting based on the white

display area.

The environmental brightness sensor (Ambibright sensor) has no function.

(AUTO BRIGHTNESS) 3: Automatically adjusts the brightness to the optimal setting based on the white display area

and by using the AmbiBright sensor to detect the brightness level of the environment.

*1: Please refer to Page 17 for full “Auto Brightness” information.

NOTE: This function is disabled when DV mode is set for Dynamic.

DV MODE

Dynamic Visual Mode allows you to select setting for Movie, Photo, Dynamic and etc.

STANDARD: Standard setting.

TEXT: Setting that makes letters and lines crisp, best suited for regular word processing and spread sheet.

MOVIE: Setting that boosts dark tones, best suited for movies.

GAMING: Setting that boosts whole tones, best suited for games that provide images with more power.

PHOTO: Setting that gives contrast, best suited for natural images and still images.

DYNAMIC: Setting that makes brightness dark by detecting black area. It gives high contrast.

Auto Adjust (Analog input only)

Automatically adjusts the Image Position, H. Size and Fine settings.

Image Controls (Analog input only)

LEFT / RIGHT

Controls Horizontal Image Position within the display area of the LCD.

DOWN / UP

Controls Vertical Image Position within the display area of the LCD.

H.SIZE

Adjusts the horizontal size by increasing or decreasing this setting.

FINE

Improves focus, clarity and image stability by increasing or decreasing this setting.

Colour Control System

Colour Control System: Six colour presets select the desired colour setting (sRGB and NATIVE colour presets are

standard and cannot be changed).

1, 2, 3, 5: Increases or decreases Red, Green or Blue colour depending upon which is selected. The change in

colour will appear on screen and the direction (increase or decrease) will be shown by the bars.

NATIVE: Original colour presented by the LCD panel that is unadjustable.

sRGB: sRGB mode dramatically improves the colour fidelity in the desktop environment by a single standard RGB

colour space. With this colour supported environment, the operator could easily and confidently communicate colour

without further colour management overhead in the most common situations.

NOTE: When MOVIE, GAMING, or PHOTO is selected as the DV MODE, NATIVE is selected automatically as the

six colour preset and cannot be changed.

English-12

Tools

VOLUME: Controls the volume of the speakers or headphones.

To mute the speaker output, press the “RESET/ECO MODE” button.

SOUND INPUT (DisplayPort only): This function selects Audio Input or DisplayPort.

VIDEO DETECT: Selects the method of video detection when more than one computer is connected.

FIRST: The video input has to be switched to “FIRST” mode. When current video input signal is not present,

then the monitor searches for a video signal from the other video input port. If the video signal is present in the

other port, then the monitor switches the video source input port to the new found video source automatically.

The monitor will not look for other video signals while the current video source is present.

NONE: The Monitor will not search the other video input port unless the monitor is turned on.

OFF TIMER: Monitor will automatically power-down when the end user has selected a predetermined amount of

time.

LED BRIGHTNESS: You can adjust the Blue LED brightness.

DDC/CI: This function allows the DDC/CI function ON or OFF.

FACTORY PRESET: Selecting Factory Preset allows you to reset all OSD control settings back to the factory

settings. Individual settings can be reset by pressing the RESET/ECO MODE button.

Menu Tools

LANGUAGE: OSD control menus are available in eight languages.

OSD LEFT/RIGHT: You can choose where you would like the OSD control image to appear horizontally on your

screen.

OSD DOWN/UP: You can choose where you would like the OSD control image to appear vertically on your screen.

OSD TURN OFF: The OSD control menu will stay on as long as it is in use. In the OSD Turn Off submenu, you can

select how long the monitor waits after the last touch of a button to shut off the OSD control menu.

OSD LOCK OUT: This control completely locks out access to all OSD control functions without Brightness and

Contrast. When attempting to activate OSD controls while in the Lock Out mode, a screen will appear indicating the

OSD controls are locked out. To activate the OSD Lock Out function, press SELECT, then right control button and

hold down simultaneously. To deactivate the OSD Lock Out, press SELECT, then left control button and hold down

simultaneously while in the OSD menu.

HOT KEY: You can adjust the brightness and contrast directly. When this function is set to ON, you can adjust the

brightness with left or right control and contrast with up or down control while the OSD menu is off.

SIGNAL INFORMATION: If you select “ON”, monitor displays “VIDEO INPUT MENU” after change Input-Port.

If you select “OFF”, monitor doesn’t display “VIDEO INPUT MENU” after change Input-Port.

IPM SETTING: The Intelligent Power Manager allows the monitor to enter into a power saving mode after a period of

inactivity. The IPM has two settings:

STANDARD: Monitor enters power save mode automatically when the input signal is lost.

SENSOR: Monitor enters power save mode automatically when the amount of surrounding light goes below the

level determined by you. The level can be adjusted in IPM sensor setting.

When in power save mode, the LED on the front of the monitor becomes dark blue. When in power save mode,

push any of the front buttons, except for POWER and SELECT, to return to normal.

When the amount of surrounding light returns to normal levels, the monitor will automatically return to normal mode.

IPM SENSOR SETTING: Adjusts threshold level of sensor for detected dark condition and shows current sensor

measurement result below.

English

English-13

ECO Information

CARBON SAVINGS: Displays the estimated carbon savings information in kg.

COST: Displays the electricity cost savings in balance.

CARBON CONVERT SETTING: Adjusts the carbon footprint factor in the carbon saving calculation. This initial

setting is based on the OECD (2008 Edition).

CURRENCY SETTING: Displays electricity pricing (available in 6 currency units).

CURRENCY CONVERT SETTING: Allows for localization of the electricity costs for accurate information in the

electrical rate savings.

NOTE: This model’s initial setting is Currency = US$ and its Currency Convert setting = $0.11.

This setting can be changed by using the ECO information menu.

If you want to use the French setting, please refer to steps below:

1. Open menu by pressing the Menu button and select the ECO information menu using the left or right key.

2. Select Currency setting item pressing the Up or Down key.

3. The French currency unit is Euro (

). You can adjust currency setting to Euro icon ( ) from US dollar

icon ($) using the Left or Right key in Current setting item.

4. Select Currency Convert Setting item using the Up or Down key*.

5. Adjust Currency Convert Setting item using the Right or Left key.

* This initial Euro ( ) setting is Germany of OECD (2007 Edition).

Please check receipt of French’s electricity prices or OECD data for French.

French of OECD (2007 Edition) was

0.12.

Information

The Information menu indicates the current input, display resolution, horizontal and vertical frequency, and polarity

settings of the monitor. The model and serial numbers of your monitor are also indicated.

OSD Warning

OSD Warning menus disappear with Exit button.

NO SIGNAL: This function gives a warning when there is no Horizontal or Vertical Sync. After power is

turned on or when there is a change of input signal, the No Signal window will appear.

OUT OF RANGE: When input signal is non-supported timing or the video signal doesn’t have proper

timing, the Out of Range menu will appear.

English-14

Specifications

Monitor Specifications MultiSync EA192M Notes

LCD Module Diagonal: 48.2 cm/19.0 inches Active matrix; thin film transistor (TFT) liquid

Viewable Image Size: 48.2 cm/19.0 inches crystal display (LCD); 0.294 mm dot pitch;

Native Resolution (Pixel Count): 1280 x 1024 250 cd/m

white luminence; 1000:1 contrast ratio,

typical (25000:1 Contrast ratio, Dynamic).

Input Signal

DVI: DVI-D 24pin: Digital RGB DVI-D with HDCP

DisplayPort: DisplayPort Connector: Digital RGB DisplayPort Complies with Standard V1.1a,

applicable to HDCP

VGA: 15pin Mini D-sub: Analog RGB 0.7 Vp-p/75 ohm

Separate sync.TTL level Positive/Negative

Composite sync.TTL level Positive/Negative

Sync on Green

(Video 0.7 Vp-p and Sync Negative 0.3 Vp-p)

Display Colours 16,777,216 Depends on display card used.

Synchronization Range Horizontal: 31.5 kHz to 81.1 kHz (Analog) Automatically

31.5 kHz to 81.1 kHz (Digital) Automatically

Vertical: 56.0 Hz to 75.0 Hz Automatically

Viewing Angle Left/Right: ±85° (CR > 10)

Up/Down: 75°/85° (CR > 10)

Resolutions Supported 720 x 400*

: VGA text Some systems may not support all modes listed.

640 x 480*

@ 60 Hz to 75 Hz

800 x 600*

@ 56 Hz to 75 Hz

832 x 624*

@ 75 Hz

1024 x 768*

@ 60 Hz to 75 Hz

1152 x 864*

@ 75 Hz

1152 x 870*

@ 75 Hz

1280 x 960*

@ 60 Hz to 75 Hz NEC DISPLAY SOLUTIONS cites recommended

1280 x 1024*

@ 60 Hz to 75 Hz............ resolution for optimal display performance.

Active Landscape: Horiz.: 376.3 mm/14.8 inches

Display Area Vert.: 301.1 mm/11.9 inches

Portrait: Horiz.: 301.1 mm/11.9 inches

Vert.: 376.3 mm/14.8 inches

AUDIO

AUDIO Input: STEREO Mini Jack: Analog Audio Stereo L/R 500mV rms

DisplayPort Connector: Digital Audio PCM 2ch 32, 44.1, 48 KHz (16/20/24bit)

Headphone Output: STEREO Mini Jack:

Headphone Impedance 32 Ohm

Speakers Practical Audio Output: 1.0 W + 1.0 W

Power Supply AC 100-240 V ~ 50/60 Hz

Current Rating 0.60-0.35 A (with Audio)

Power Maximun Operation: 32 W

Consumption Normal Operation: 23 W

Dimensions Landscape: 408.0 mm (W) x 386.4 - 496.4 mm (H) x 213.9 mm (D)

16.1 inches (W) x 15.2 - 19.5 inches (H) x 8.4 inches (D)

Portrait: 338.0 mm (W) x 424.7 - 532.4 mm (H) x 213.9 mm (D)

13.3 inches (W) x 16.7 - 21.0 inches (H) x 8.4 inches (D)

Height Adjustment: 110 mm/4.3 inches (Landscape condition)

107.7 mm/4.2 inches (Portrait condition)

Weight 5.5 kg (12.1 lbs)

Environmental Considerations

Operating Temperature: 5°C to 35°C/41°F to 95°F

Humidity: 20% to 80%

Altitude: 0 to 6,562 Feet/0 to 2,000 m

Storage Temperature: -10°C to 60°C/14°F to 140°F

Humidity: 10% to 85%

Altitude: 0 to 40,000 Feet/0 to 12,192 m

*1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is

normal and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel technologies, each dot on

the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.

NOTE: Technical specifications are subject to change without notice.

English

English-15

Features

Thin-frame design creates more desktop space for you to work and play, while the flat screen’s crisp, bright images and crystal-

clear text deliver a comfortable viewing experience.

No Touch Auto Adjust automatically adjusts your optimal image settings upon initial power-on.

Colour Control System allows you to change between six colour settings on your display to match your personal preference.

Redesigned OSD controls allow you to quickly and easily adjust all elements of your screen image.

NaViSet software offers an expanded and intuitive graphical interface, allowing you to more easily adjust OSD display settings

via mouse and keyboard.

Height-adjustable (110 mm) stand with tilt, swivel, pivot and cable management adds flexibility to your viewing preferences.

The flat screen’s crisp, bright images and crystal-clear text deliver a comfortable viewing experience.

ErgoDesign Features: Enhance human ergonomics to improve the working environment, protect the health of the user and

save money. Examples include OSD controls for quick and easy image adjustments, tilt base for preferred angle of vision, small

footprint and compliance with MPRII and TCO guidelines for lower emissions.

Plug and Play: The Microsoft

solution with the Windows

operating system facilitates setup and installation by allowing the

monitor to send its capabilities (such as screen size and resolutions supported) directly to your computer, automatically

optimizing display performance.

IPM (Intelligent Power Manager) System: Provides innovative power-saving methods that allow the monitor to shift to a lower

power consumption level when on but not in use, saving two-thirds of your monitor energy costs, reducing emissions and

lowering the air conditioning costs of the workplace.

Multiple Frequency Technology: Automatically adjusts monitor to the display card’s scanning frequency, thus displaying the

resolution required.

FullScan Capability: Allows you to use the entire screen area in most resolutions, significantly expanding image size.

VESA Standard Mounting Interface: Allows users to connect their MultiSync monitor to any VESA standard third party

mounting arm or bracket. Allows for the monitor to be mounted on a wall or an arm using any third party compliant device.

Environmental Impact: Annual typical maximum operating carbon footprint of this monitor (world-wide average) is

approximately 29.5 kg (calculated by: rated wattage x 8 hours per day x 5 days a week x 45 weeks per year x Power-to-

Carbon conversion factor - conversion factor is based on OECD publication of global CO2 emissions 2008 Edition).

This monitor has a manufacturing carbon footprint of approximately 30 kg.

Note: The manufacturing and operating carbon footprints are calculated by a unique algorithm developed exclusively by NEC

for its monitors.

English-16

Troubleshooting

No picture

• The signal cable should be completely connected to the display card/computer.

• The display card should be completely seated in its slot.

• Front Power Switch and computer power switch should be in the ON position.

• Check to make sure that a supported mode has been selected on the display card or system being used.

(Please consult display card or system manual to change graphics mode.)

• Check the monitor and your display card with respect to compatibility and recommended settings.

• Check the signal cable connector for bent or pushed-in pins.

• If the front LED is dark blue, check the status of the IPM mode (see page 12).

Power Button does not respond

• Unplug the power cord of the monitor from the AC outlet to turn off and reset the monitor.

Image Persistence

• Please be aware that LCD Technology may experience a phenomenon known as Image Persistence. Image

Persistence occurs when a residual or “ghost” image of a previous image remains visible on the screen. Unlike CRT

monitors, LCD monitors’ image persistence is not permanent, but constant images being displayed for a long period of

time should be avoided. To alleviate image persistence, turn off the monitor for as long as the previous image was

displayed. For example, if an image was on the monitor for one hour and a residual image remains, the monitor should

be turned off for one hour to erase the image.

NOTE: As with all personal display devices, NEC DISPLAY SOLUTIONS recommends displaying moving images and using

a moving screen saver at regular intervals whenever the screen is idle or turning off the monitor when not in use.

Message “OUT OF RANGE” is displayed (screen is either blank or shows rough images only)

• Image is displayed only roughly (pixels are missing) and OSD warning “OUT OF RANGE” is displayed: Either signal

clock or resolution is too high. Choose one of the supported modes.

• OSD warning “OUT OF RANGE” is displayed on a blank screen: Signal frequency is out of range. Choose one of the

supported modes.

Image is unstable, unfocused or swimming is apparent

• Signal cable should be completely attached to the computer.

• Use the OSD Image Adjust controls to focus and adjust display by increasing or decreasing the fine total. When the

display mode is changed, the OSD Image Adjust settings may need to be re-adjusted.

• Check the monitor and your display card with respect to compatibility and recommended signal timings.

• If your text is garbled, change the video mode to non-interlace and use 60Hz refresh rate.

LED on monitor is not lit (no blue or amber colour can be seen)

• Power Switch should be in the ON position and power cord should be connected.

Picture is not as bright

• Make sure ECO MODE is turned off.

• If the brightness fluctuates make sure AUTO BRIGHTNESS is turned off.

Display image is not sized properly

• Use the OSD Image Adjust controls to increase or decrease the H. SIZE.

• Check to make sure that a supported mode has been selected on the display card or system being used.

(Please consult display card or system manual to change graphics mode.)

No Video

• Make certain the computer is not in a power-saving mode (touch the keyboard or mouse).

• Some video cards do not output video signal when monitor is turned OFF/ON or disconnect/connect from the AC

power cord under low resolution with DisplayPort.

No Sound

• Make sure the speaker cable is proper connected.

• Check to see if mute is activated.

• Check the volume in the OSD menu.

Brightness difference during multiple monitor usage

• Change Auto Brightness to OFF and adjust brightness.

NOTE: When Auto Brightness is set to ON, the monitor automatically adjusts brightness to the environment.

When condition is difference, monitor brightness will be difference.

English

English-17

Using the Auto Brightness function

The brightness of the LCD screen can be set to increase or decrease depending on the amount of ambient light within the

room. If the room is bright, the monitor becomes correspondingly bright. If the room is dim, then the monitor will dim

accordingly. The purpose of this function is to make the viewing experience more comfortable to the eye in a variety of lighting

conditions.

The Auto Brightness function is set to 1 by default.

SETUP

Use the following procedure to select the Brightness Range that the monitor will use when the Auto Brightness function is

activated.

1. Set the BRIGHT level. This is the brightness level that the monitor will go up to when the ambient light level is highest.

Make sure the room is at its brightest when setting this level.

Select “1” or “3” in the AUTO BRIGHTNESS menu (Figure 1). Then use the front buttons to move the cursor up to the

BRIGHTNESS setting. Choose the desired brightness level (Figure 2).

2. Set the DARK level. This is the level of brightness that the monitor will go down to when the ambient light level is low.

Make sure the room is at its darkest when setting this level.

Then use the front buttons to move the cursor up to the BRIGHTNESS setting. Choose the desired brightness level

(Figure 3).

Figure 1

Figure 2

Figure 3

When the “Auto Brightness” function is enabled the Brightness level of the screen changes automatically according to the

lighting conditions of the room (Figure 4).

BRIGHTNESS level set

for the monitor to use

when ambient lighting

level is low.

BRIGHTNESS level set for the

monitor to use when ambient

lighting level is high.

BRIGHTNESS range

Lb: Border between bright and dim lighting conditions; set at factory

L1: BRIGHTNESS level set for the monitor to use when ambient lighting level is high (L1>Lb)

L2: BRIGHTNESS level set for the monitor to use when ambient lighting level is low (L2<Lb)

L1 and L2 are the brightness levels set by you to compensate for changes in ambient lighting.

Figure 4

dark bright

room bright condition

Screen Brightness value by Auto Brightness function

Bright condition area

Dark condition area

English-18

TCO Displays 5

Congratulations!

This display is designed for both you and the planet!

The display you have just purchased carries the TCO

Certified label. This ensures that your display is designed,

manufactured and tested according to some of the strictest

quality and environmental requirements in the world.

This makes for a high performance product, designed with

the user in focus that also minimizes the impact on the

climate and our natural environment.

TCO Certified is a third party verified program, where every product model is tested by an

accredited impartial test laboratory. TCO Certified represents one of the toughest certifications

for displays worldwide.

Some of the Usability features of the TCO Certified for displays:

• Good visual ergonomics and image quality is tested to ensure top performance and reduce

sight and strain problems. Important parameters are luminance, contrast, resolution, black level,

gamma curve, color and luminance uniformity, color rendition and image stability.

• Product have been tested according to rigorous safety standards at an impartial laboratory.

• Electric and magnetic fields emissions as low as normal household background levels.

• Low acoustic noise emissions.

Some of the Environmental features of the TCO Certified for displays:

• The brand owner demonstrates corporate social responsibility and has a certified

environmental management system (EMAS or ISO 14001).

• Very low energy consumption both in on- and standby mode minimize climate impact.

• Restrictions on chlorinated and brominated flame retardants, plasticizers, plastics and

heavy metals such as cadmium, mercury and lead (RoHS compliance).

• Both product and product packaging is prepared for recycling.

• The brand owner offers take-back options.

The requirements can be downloaded from our web site. The requirements included in this

label have been developed by TCO Development in co-operation with scientists, experts,

users as well as manufacturers all over the world. Since the end of the 1980s TCO has been

involved in influencing the development of IT equipment in a more user-friendly direction.

Our labeling system started with displays in 1992 and is now requested by users and IT-

manufacturers all over the world. About 50% of all displays worldwide are TCO certified.

For more information, please visit

www.tcodevelopment.com

Page is loading ...

NEC EA192M User manual

Brand: NEC

Model: EA192M

Category: LED displays

Type: User manual

Download PDF

report

NEC EA192M User manual

NEC EA192M User manual

Related papers

Other documents