Adlink cPCI-6540 Series Owner's manual

Leading EDGE COMPUTING

Manual Rev.: 1.4

Revision Date: July 14, 2023

Part Number: 50M-31426-1040

cPCI-6540 Series

Performance 6U CompactPCI®

Intel® Xeon®, Core™ i7/i3 Processor Blade

User’s Manual

ii Revision History

Leading EDGE COMPUTING

Revision History

Revision Release Date Description of Change(s)

1.0 2022-04-20 Initial release

1.1 2022-04-21 Update M.2 module specification

1.2 2022-07-11 Correct COM specification and WDT info; update

OS and EMI specifications

1.3 2022-09-13 Correct JN1 -12V power specification

1.4 2023-07-24 Update ECC info; add power consumption data

Previous revision: P/N 50M-00038-1030

Preface iii

cPCI-6540

Preface

This document contains proprietary information protected by copy-

right. All rights are reserved. No part of this manual may be repro-

duced by any mechanical, electronic, or other means in any form

without prior written permission of the manufacturer.

Disclaimer

The information in this document is subject to change without prior

notice in order to improve reliability, design, and function and does

not represent a commitment on the part of the manufacturer.

In no event will the manufacturer be liable for direct, indirect, spe-

cial, incidental, or consequential damages arising out of the use or

inability to use the product or documentation, even if advised of

the possibility of such damages.

Environmental Responsibility

ADLINK is committed to fulfill its social responsi-

bility to global environmental preservation

through compliance with the European Union's

Restriction of Hazardous Substances (RoHS)

directive and Waste Electrical and Electronic

Equipment (WEEE) directive. Environmental

protection is a top priority for ADLINK. We have

enforced measures to ensure that our products,

manufacturing processes, components, and raw

materials have as little impact on the environment as possible.

When products are at their end of life, our customers are encour-

aged to dispose of them in accordance with the product disposal

and/or recovery programs prescribed by their nation or company.

Battery Labels (for products with battery)

ᑜ㔚ᳰ⺧࿁ᡴ

iv Preface

Leading EDGE COMPUTING

California Proposition 65 Warning

WARNING: This product can expose you to chemicals

including acrylamide, arsenic, benzene, cadmium,

Tris(1,3-dichloro-2-propyl)phosphate (TDCPP), 1,4-Diox-

ane, formaldehyde, lead, DEHP, styrene, DINP, BBP, PVC, and

vinyl materials, which are known to the State of California to cause

cancer, and acrylamide, benzene, cadmium, lead, mercury,

phthalates, toluene, DEHP, DIDP, DnHP, DBP, BBP, PVC, and

vinyl materials, which are known to the State of California to cause

birth defects or other reproductive harm. For more information go

to www.P65Warnings.ca.gov.

Trademarks

Product names mentioned herein are used for identification pur-

poses only and may be trademarks and/or registered trademarks

of their respective companies.

Conventions

Take note of the following conventions used throughout this

manual to make sure that users perform certain tasks and

instructions properly.

NOTE:

Additional information, aids, and tips that help users perform

tasks.

CAUTION:

Information to prevent minor physical injury, component dam-

age, data loss, and/or program corruption when trying to com-

plete a task.

WARNING:

Information to prevent serious physical injury, component

damage, data loss, and/or program corruption when trying to

complete a specific task.

Table of Contents v

cPCI-6540

Table of Contents

Revision History...................................................................... ii

Preface .................................................................................... iii

List of Figures ....................................................................... vii

List of Tables.......................................................................... ix

1 Introduction ........................................................................ 1

1.1 Overview.............................................................................. 1

1.2 Features............................................................................... 2

1.3 Package Contents ............................................................... 3

2 Specifications..................................................................... 5

2.1 cPCI-6540 Processor Blade Specifications ......................... 5

2.2 Block Diagrams.................................................................... 8

2.3 I/O Connectivity Table ......................................................... 9

2.4 Power Requirements ......................................................... 10

3 Functional Description .................................................... 11

3.1 Processors......................................................................... 11

3.2 Chipset............................................................................... 13

3.3 PMC/XMC.......................................................................... 13

3.4 Intel® Turbo Boost Technology ......................................... 13

3.5 Intel® Hyper-Threading Technology.................................. 14

3.6 Trusted Platform Module ................................................... 14

3.7 Battery ............................................................................... 15

3.8 Watchdog Timer ................................................................ 15

4 Board Interfaces............................................................... 17

4.1 cPCI-6540 Board Layout ................................................... 17

4.2 cPCI-6540V Board Layout ................................................. 18

vi Table of Contents

Leading EDGE COMPUTING

4.3 cPCI-6540 Series Front Panel ........................................... 19

4.4 Connector Pin Assignments............................................... 21

4.5 Switches and Buttons ........................................................ 37

5 Getting Started .................................................................. 43

5.1 CPU and Heatsink ............................................................. 43

5.2 M.2 SATA Module Installation............................................ 44

5.3 2.5" SATA Drive Installation............................................... 45

5.4 PMC/XMC Installation........................................................ 49

5.5 Installing the cPCI-6540 to the Chassis ............................. 51

6 Driver Installation.............................................................. 53

6.1 cPCI-6540 Drivers.............................................................. 53

7 BIOS Setup Utility ............................................................. 55

7.1 Starting the BIOS ............................................................... 55

7.2 Main Setup......................................................................... 57

7.3 Advanced ........................................................................... 59

7.4 Chipset............................................................................... 67

7.5 Security .............................................................................. 76

7.6 Boot ................................................................................... 77

7.7 Save & Exit ........................................................................ 78

7.8 Server Mgmt ...................................................................... 78

8 IPMI User Guide ................................................................ 79

8.1 Introduction ........................................................................ 79

8.2 Summary of Commands Supported by BMR-AVR-cPCI ... 79

8.3 CompactPCI Address Map ................................................ 83

8.4 Communications with IPMC............................................... 83

8.5 IPMI Sensors List............................................................... 84

8.6 Relevant Documents.......................................................... 84

Important Safety Instructions............................................... 85

Getting Service ...................................................................... 87

List of Figures vii

cPCI-6540

List of Figures

Figure 2-1: cPCI-6540 Processor Blade Functional Block Diagram .. 8

Figure 4-1: cPCI-6540 Series Board Layout .................................... 17

Figure 4-2: cPCI-6540V Series Board Layout.................................. 18

Figure 4-3: cPCI-6540 Series Front Panel Layout ........................... 19

Figure 4-4: Solder-side switch and button locations ........................ 37

Figure 4-5: Component-side switch locations .................................. 38

viii List of Figures

Leading EDGE COMPUTING

This page intentionally left blank.

List of Tables ix

cPCI-6540

List of Tables

Table 2-1: cPCI-6540 Processor Blade Specifications ..................... 5

Table 2-2: cPCI-6540 I/O Connectivity ............................................. 9

Table 4-1: cPCI-6540 Front Panel System LED Descriptions ........ 20

Table 4-2: RJ-45 GbE Pin Definitions ............................................. 22

Table 4-3: LAN LED Status Definitions........................................... 22

Table 4-4: Front Panel COM Pin Definitions................................... 23

Table 4-5: COM RJ-45 to DB-9 Cable Pin Definitions .................... 23

Table 4-6: SATA Board-to-Board Connector Pin Definition............ 24

Table 4-7: Serial ATA Connector with Power Pin Definition ........... 25

Table 4-8: M.2 Socket Pin Definition............................................... 27

Table 4-9: DisplayPort Connector Definition................................... 27

Table 4-10: PMC Connector Pin Definitions ..................................... 29

Table 4-11: XMC1 Connector Pin Definition ..................................... 30

Table 4-12: XMC2 Connector Pin Definition ..................................... 31

Table 4-13: CompactPCI J1 Connector Pin Definition...................... 32

Table 4-14: CompactPCI J2 Connector Pin Definition...................... 33

Table 4-15: CompactPCI J3 Connector Pin Definition...................... 34

Table 4-16: CompactPCI J4 Connector Pin Definition...................... 35

Table 4-17: CompactPCI J5 Connector Pin Definition...................... 36

xList of Tables

Leading EDGE COMPUTING

This page intentionally left blank.

Introduction 1

cPCI-6540

1 Introduction

1.1 Overview

The ADLINK cPCI-6540 Series is a 6U CompactPCI® processor

blade with soldered DDR4-2666 memory up to 32GB and

DDR4-2666 socket type memory up to 32GB. The ADLINK

cPCI-6540 features an Intel® Xeon® E and 9th Gen Intel® Core™

(formerly Coffee Lake-H) with Mobile Intel® CM246 Chipset.

The cPCI-6540 Series is a 6U CompactPCI blade in single-slot

(4HP) width form factor. Front panel I/O for the cPCI-6540 includes

1x DP, 2x GbE, 2x USB 3.1 ports, 1x RJ-45 COM port, 1x VGA

and 1x PCM/XMC slot. The cPCI-6540V front panel includes 1x

DP, 2x GbE, 1x USB 3.1 port and 2x PMC/XMC slots.

Graphics support is integrated on the CPU and supports 3 inde-

pendent displays when mated with selected rear transition mod-

ules (cPCI-R6700 and cPCI-R6500). Storage for both cPCI-6540V

and cPCI-6540 versions includes an M.2 socket (M key) and a

SATA connector with adapter board (DB-LSATA).

For expansion, both cPCI-6540 and cPCI-6540V are equipped

with one 64-bit/33, 66,133MHz PMC site or one PCIe x8 Gen 2

XMC site with rear I/O. The cPCI-6540V is equipped with one

additional PMC/XMC slot supporting PCI 64-bit/33,66,133MHz

PMC site or one PCIe x8 Gen 2 XMC site.

Rear I/O signals to RTM include 2x GbE by Intel® Ethernet Con-

troller I210, 1x DVI-I, 1x eDP, 1x PCIe x4 (configurable to 4x PCIe

x1), 3x SATA 3.0, 6x USB 2.0, 1x USB 3.1, 16x GPIO, high defini-

tion audio, KB/MS, and 2x serial ports (one supports Tx/Rx only).

The cPCI-6540 Series offers outstanding performance provided by

Intel® Xeon® E, 9th Gen Intel® Core™ processor family, and is an

ideal solution for military, aerospace, transportation and other

industrial applications that require best value per watt computing

power. The ADLINK cPCI-6540 Series provides higher flexibility,

supporting operation in peripheral slots with CompactPCI bus

communication (Universal mode) and as a standalone computer if

there is no CPU blade in the host slot. Internet remote manage-

ability includes IPMI for system health monitoring over Internet

and a GbE port on the faceplate supports Intel® AMT 9.0 for

remote monitoring.

2Introduction

Leading EDGE COMPUTING

1.2 Features

X6U CompactPCI blade in 4HP width form factor

XIntel® Xeon® E, 9th Gen Intel® Core™and Mobile Intel®

CM246 Chipset

XGraphics and memory controllers integrated in processor

XOne channel DDR4-2666 soldered onboard memory up to

32GB and one channel DDR4-2666 socket memory up to

32GB (total 64GB). ECC support dependent on CPU.

X64bit/66MHz CompactPCI Interface based on PCI specifica-

tions, universal V(I/O)

XSupports Universal mode operation as a slave in peripheral

slots and operation as a standalone computer if no CPU blade

in host slot

XOne 64-bit/33,66,133MHz PMC or PCIe x8 Gen2 XMC site on

cPCI-6540 with rear I/O; one additional PMC/XMC site on

cPCI-6540V

XSupports IPMI over LAN for system health monitoring

X

DisplayPort and VGA port port on front panel, additional DVI-I

and eDP routed to rear

XTwo PCIe Gigabit Ethernet egress ports supported by Intel

LAN controller on front panel, one supports Intel® AMT 9.0 by

Intel® Ethernet Controller I210 (PHY)

XTwo additional PCIe Gigabit Ethernet by Intel® Ethernet Con-

troller I210 routed to J2 (PICMG 2.16 compliant)

XAdditional two Gigabit Ethernet ports with selected rear transi-

tion module (cPCI-R6100 Series)

XHigh definition audio routed to RTM

X2.5" SATA SSD supported on cPCI-6540 only

XM.2 SATA SSD supported on both cPCI-6540 and cPCI-6540V

XOptional Infineon SLB9665XT2.0 TPM support

Introduction 3

cPCI-6540

1.3 Package Contents

The cPCI-6540 is packaged with the following components. If any

of the following items are missing or damaged, retain the shipping

carton and packing material and contact the dealer for inspection.

Please obtain authorization before returning any product to

ADLINK. The packing contents of cPCI-6540 Series non-standard

configurations will vary depending on customer requests.

CPU module

XThe cPCI-6540 Series Processor Blade

ZCPU and memory specifications will differ depending on

options selected

ZThermal module is assembled on the board

XRJ-45 to DB-9 COM adapter cable (cPCI-6540)

X2.5” SATA drive accessory pack

Rear Transition Module

XDependent on the module selected

NOTE:

The contents of non-standard cPCI-6540 configurations may

vary depending on the customer’s requirements.

CAUTION:

This product must be protected from static discharge and phys-

ical shock. Never remove any of the components except at a

static-free workstation. Use the anti-static bag shipped with the

product when putting the board on a surface. Wear an

anti-static wrist strap properly grounded on one of the system's

ESD ground jacks when installing or servicing system compo-

nents.

4Introduction

Leading EDGE COMPUTING

This page intentionally left blank.

Specifications 5

cPCI-6540

2 Specifications

2.1 cPCI-6540 Processor Blade Specifications

CompactPCI®

Standards

• PICMG® 2.0 CompactPCI® Rev. 3.0

• PICMG® 2.1 Hot Swap Specification Rev. 2.0

• PICMG® 2.9 System Management (IPMI Rev. 1.5)

• PICMG® 2.16 Packet Switching Backplane Rev. 1.0

Mechanical • Standard 6U CompactPCI®

• Board size: 233mm x 160mm

• Single slot (4HP, 20.32mm)

• CompactPCI® connectors: J1, J2, J3, J4, J5

Processor • Intel® Xeon® E-2276ME processor, 6 cores/12 threads,

12MB cache, 45/35W by cTDP, Intel® UHD Graphic P630

• Intel® Core™ i7-9850HE processor, 6 cores/12 threads,

9MB cache, 2.7/4.4GHz, 45/35W by cTDP, Intel® UHD

Graphics 630

• Intel® Core™ i7-9850HL Processor, 6 cores/12 threads,

9MB cache, 1.9/4.1GHz, 25W, Intel® UHD Graphics 630

• Intel® Core™ i3-9100HL processor, 4 cores/4 threads,

6MB cache, 1.6/2.9GHz, 25W, Intel® UHD Graphics 630

• Intel® Celeron® G4930E processor, 2 cores/2 threads,

2MB cache, 2.4GHz, 35W, Intel® UHD Graphics 610

Chipset • Mobile Intel® CM246 Chipset

Memory • Dual channel up to DDR4-2666 memory

• One channel DDR4 soldered up to 32GB

• One channel SODIMM socket memory up to 32GB

• DRAM configuration 64GB/32GB/16GB/8GB

• ECC supported by Intel® Xeon® E-2276ME, Intel® Core™

i3-9100HL and Intel® Celeron® G4930E

CompactPCI

Bus

• PCI 64-bit/66MHz; 3.3V, 5V universal V I/O

• Supports operation in system slot as master or in peripheral

slot with connectivity to CompactPCI bus (Universal mode)

• Supports operation in peripheral slot as standalone CPU

board when no host blade in host slot

Gigabit

Ethernet

• Four PCIe x1 Intel® I210 Gigabit Ethernet controllers

• Two egress 10/100/1000BASE-T ports on front panel, one

supporting NCSI

• Two egress 10/100/1000BASE-T ports routed to rear

transition module supporting PICMG 2.16

Table 2-1: cPCI-6540 Processor Blade Specifications

6 Specifications

Leading EDGE COMPUTING

Graphics • Intel® Xeon® E-2276ME: Intel® UHD Graphics P630

• Intel® Core™ i7-9850HE: Intel® UHD Graphics 630

• Intel® Core™ i7-9850HL: Intel® UHD Graphics 630

• Intel® Core™ i3-9100HL: Intel® UHD Graphics 630

• Intel® Celeron® G4930E: Intel® UHD Graphics 610

• One VGA port and one DP port on front panel

• One VGA port routed to rear J3, and one TMDS port routed

to rear J5

Serial Ports • Up to three serial ports

• One RS-232/422/485 serial port on front panel (cPCI-6540)

• Up to two RS-232 COM port routed to RTM (one port

supports RS-232 Tx/Rx only)

USB • One USB 3.0 to rear J5

• Up to six USB 2.0 ports routed to rear transition module

• Two USB 3.1 Gen2 on front panel

PMC/XMC • One 64-bit/33,66,133 MHz PMC site or PCIe x8 Gen 2 XMC

site for cPCI-6540V version with rear I/O

• Two 64-bit/33,66,133 MHz PMC sites or PCIe x8 Gen 2 XMC

sites on cPCI-6540 version

Audio • High definition audio routed to rear J3

TPM TPM 2.0

• SLB9665XT2.0 FW 5.51

Storage

Interfaces1

• One onboard 2.5” SATA connector supporting SATA 6Gb/s

drive on cPCI-6540

• One PCIe x4 M.2

• Three SATA 6Gb/s channels routed to RTM

Faceplate I/O cPCI-6540 (4HP)

• 2x 10/100/1000BASE-T Ethernet ports

•1x DP port

• 1x VGA port

• 2x USB 3.1 ports

• 1x RJ-45 serial port

• 1x PMC/XMC slot

cPCI-6540V (4HP)

• 2x 10/100/1000BASE-T Ethernet ports

•1x DP port

• 1x USB 3.1 port

• 2x PMC/XMC slots

OS

Compatibility

• Ubuntu desktop 20.04 LTS (Focal Fossa) 64-bit

• Windows 10 Enterprise 2004 64-bit

Please contact ADLINK for other OS support

Table 2-1: cPCI-6540 Processor Blade Specifications

Specifications 7

cPCI-6540

1. The storage device limits the operational vibration tolerance. When

the application requires higher specification for anti-vibration, it is

recommended to use a flash storage device.

2. ADLINK-certified thermal design. The thermal performance is depen-

dent on the chassis cooling design. Sufficient forced air-flow is required.

Temperature limits of optional mass storage devices may also affect the

thermal specification.

Environmental • Operating Temperature (with forced air flow)2:

Standard: -20°C to +70°C

Extreme temperature: -40°C to +85°C

• Storage Temperature: -50°C to 100°C

• Humidity: 95% @60°C non-condensing

• Shock: 20G peak-to-peak, 11ms duration, non-operating

•Vibration

1: 2Grms, 5-500Hz, each axis, operating (w/o hard

drive)

EMI • EMC: EN 55032/35

• EMI: CISPR 32, FCC Part 15B Class A

•EMS:

IEC 61000-4-11

IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV

IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m

IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV

IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV

IEC 61000-4-6 CS: 1 V

IEC 61000-4-8 PFM

Table 2-1: cPCI-6540 Processor Blade Specifications

8 Specifications

Leading EDGE COMPUTING

2.2 Block Diagrams

cPCI-6540 Processor Blade

Figure 2-1: cPCI-6540 Processor Blade Functional Block Diagram

DP

Front Panel

DMI

J1/J2

J3/J4/J5

Intel

I210IT

DDR4 2666 MHz

Soldered max. 32GB

SO-DIMM, max. 32GB

PCIe x1

Intel®CM246 Chipset

1x

USB 3.1

M.2 (M-Key)

Socket

eDP TMDS

DP

to

VGA

XMC1 XMC2

eDP

to

VGA

TMDS

to

HDMI/DVI

9th Gen Intel®Processor

(Coffee Lake-H)

PCIe

x8

PCIe

x8

eDP

USB1

Intel

I210IT

LAN1

A

PCIe x1

LAN1

B

1x

USB 3.1

PCIe x4

(1x SATA)

PCIe x4

PI7C9X130

PMC1 PMC2

PCIX 133M

PCIe x1

Intel

I210IT

LAN3

PCIe x1

Intel

I210IT

LAN4

2.5” HDD

SATA x1

6x USB 2.0

1x USB 3.1

3x SATA 3.0

HDA

GPIO x16

1x PCIe 2.0 x4

PCIe x4

Super I/O

NCT6106D

PI7C9X130

PCI 64-bit

BMC

TPM 2.0

LPC

COM5

(RS232

Tx/Rx only)

COM4

RS232-SOL

J3

COM3

(Tx/Rx only)

COM2

RS232

KB/MS

PS2 x2

RS232/RS422/RS485

Transceiver

COM1

RS232

IPMB

VGA

USB2

COM1

(RJ45)

cPCI-6540 supported ports

cPCI-6540V supported ports

LAN1 LAN2

JN4 pins to J4

Specifications 9

cPCI-6540

2.3 I/O Connectivity Table

Table 2-2: cPCI-6540 I/O Connectivity

Function cPCI-6540 (4HP) cPCI-6540V (4HP)

Faceplate Onboard Faceplate Onboard

Gigabit

Ethernet Y x2 – Y x2 –

COM Y (RJ-45) – – –

USB 3.1 Y x2 – Y x1 –

DP Y x1 – Y x1 –

VGA Y x1 – – –

Serial ATA –Y x1–-

M.2 –Y x1–Y x1

PMC/XMC –Y x1–Y x2

LED Y x5 – Y x5 –

Reset Button Y–Y–

10 Specifications

Leading EDGE COMPUTING

2.4 Power Requirements

In order to guarantee a stable functionality of the system, it is rec-

ommended to provide more power than the system requires. An

industrial power supply unit should be able to provide at least

twice as much power as the entire system requires of each

voltage. An ATX power supply unit should be able to provide at

least three times as much power as the entire system requires of

each voltage.

The tolerance of the voltage lines described in the CompactPCI

specification (PICMG 2.0 R3.0) is +5%/-3% for 5, 3.3 V and ±5%

for ±12V. This specification is for power delivered to each slot and

it includes both the power supply and the backplane tolerance.

Voltage Nominal

Value Tolerance Max. Ripple

(P - P)

5V +5.0 VDC +5% / -3% 50 mV

3.3V +3.3 VDC +5% / -3% 50 mV

+12V +12 VDC +5% / -5% 240 mV

-12V -12 VDC +5% / -5% 240 mV

V I/O (PCI I/O

Buffer Voltage)

+3.3 VDC or

+5 VDC +5% / -3% 50 mV

GND

Page is loading ...

Adlink cPCI-6540 Series Owner's manual

Adlink cPCI-6540 Series Owner's manual

Related papers

Other documents