2. jbc
  3. F3450

jbc F3450, F3435, F3449, F6457 Owner's manual

  • Hello! I've reviewed the instruction manual for the JBC F3435, F3449, F3450, and F6457 Fume Extractors, designed for use with T210, T245, and T470 soldering tools. This manual covers assembly, compatibility and specifications. I'm ready to answer your questions about these devices and their functionalities.
  • What soldering tools are compatible with these fume extractors?
    What is included in the packing list?
    What tube diameters are available for these fume extractors?
    How is the fume extractor installed?
INSTRUCTION MANUAL
F3435, F3449, F3450, F6457
Fume Extractor for T210,
T245 & T470
2
Packing list
This manual corresponds to the following references:
F3450 for T210, tube ø 4mm
F3449 for T245, tube ø 4mm
F3435 for T245, tube ø 6mm
F6457 for T470, tube ø 6mm
The following items are included:
Cleaning Brush .......................................... 1 unitFume Extractor ......................................... 1 unit
According to purchased reference.
Manual ......................................................................................................................................................... 1 unit
Ref. 0031932
3
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
Fume Extractor F3435 F3449 F3450 F6457
Ø Tube (mm) 6 4 4 6
T245 Handles
T470 Handles
T210 Handles
Compatibility
Features
Fume Extractors for Tools are used to extract the smoke produced during soldering near the soldering
tip. An extraction pump with filter is required.
According to purchased reference, they are designed to be used with JBC soldering tools: T245, T210
and T470 Handles.
Depending on the reference, they come with different tube diameters:
4
Assembly
For T210 Handles *
1
2
Place the clamp directly on the handle (1) and slide it forward or backward (2) until the opening of the
extractor nozzle is placed near the tip of the cartridge (3).
Adjust the position of the
extractor to get the nozzle
opening near the cartridge tip.
3
* not included, sold separately.
5
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
For T245 & T470 Handles *
Thread the cable into the clamp (1) and slide the clamp onto the handle (2) until the opening of the
extractor nozzle is placed near the tip of the cartridge (3).
1
2
Adjust the position of the
extractor to get the nozzle
opening near the cartridge tip.
3
* not included, sold separately.
Notes
6
Notes
7
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must
be collected and returned to an authorized recycling facility.
Warranty
JBC’s 2 year warranty covers this equipment against
all manufacturing defects, including the replacement
of defective parts and labour.
Warranty does not cover product wear or misuse.
In order for the warranty to be valid, equipment must
be returned, postage paid, to the dealer where it was
purchased.
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
0031932-280623
Specifications
F3450, F3435, F3449, F6457
Fume Extractors for T210, T245 & T470
Ref.: F3450, F3435, F3449, F6457
F3450, F3435, F3449
- Tube Length: 2m
- Total Net Weight: 62.7g / 0.14 lb
- Package Dimensions / Weight: 245 x 185 x 45mm / 125.83g
(L x W x H) 9.65 x 7.28 x 1.77 in / 0.28 lb
F6457
- Tube Length: 3.5m
- Total Net Weight: 87.15g / 0.19 lb
- Package Dimensions / Weight: 245 x 185 x 45mm / 150.28 g
(L x W x H) 9.65 x 7.28 x 1.77 in / 0.33 lb
Complies with CE standards.
/