2. ELK
  3. ELK-C1M1LTEV

ELK ELK-C1M1LTEV Quick start guide

  • Hello! I've read the C1M1 Quick Start Guide. This guide provides steps on how to register, activate, and test your C1M1 alarm communicator using Telguard and ElkLink platforms. It also covers connecting wiring, programming communication settings with ElkRP2, and verifying alarm signals via cellular and IP pathways. I'm ready to answer any questions you might have about the guide's instructions or product features.
  • What information is needed to activate the C1M1 on Telguard?
    What information is needed to activate the C1M1 on ElkLink?
    How do I program communication settings?
Activation Quick Start Guide
Register and establish Telguard
Online Account. Request to
have ELK-TAP rate plan added
to your account.
Register and establish ElkLink
Account
Check cellular signal strength in
proposed mounting location
Physically mount C1M1, make
all wiring connections and apply
power
Activate C1M1 on Telguard
Online Site using device serial
or ICCID number
Activate C1M1 on ElkLink Site
using device MAC address and
PIN
Program M1
communications settings
through ElkRP2
Test alarm signals through
both cellular and IP
pathways
1 2 3 4
5 6 7 8
For help or more info, contact us at (800)797-9355 or email [email protected]om
/