HERO GLAMOUR Owner's manual

PREFACE

Your motorcycle is conforming to latest (Bharat stage-III norms) regulation for emission,

safety & noise levels. We are also using non asbestos brake shoes / pads and engine

gaskets which are environment friendly in nature.

Let us make this world a safer, healthier and more environment friendly place.

We, at Hero MotoCorp, are committed to demonstrate excellence in our environment

performance on a continual basis, as an intrinsic element of our corporate philosophy. To

achieve this we commit ourselves to continue product innovations to improve

environment compatibility, comply with all applicable legislation including environment

legislation and strengthen the green supply chain.

Your Authorised Hero MotoCorp dealer will be glad to provide further information or

assistance and is equipped to handle your future service needs.

Thank you for selecting a Hero MotoCorp GLAMOUR PROGRAMMED FI. We wish

you many miles of continued riding pleasure in the years ahead.

This booklet is your guide to the basic operation and maintenance of your new

Hero MotoCorp GLAMOUR PROGRAMMED FI. Please take time to read it

carefully. As with any fine machine, proper care and maintenance are essential for

trouble-free operation and optimum performance.

NOTE

ALL INFORMATION, ILLUSTRATION, PHOTOGRAPH, DIRECTIONS,

SPECIFICATIONS AND OTHER CONTENTS COVERED IN THIS OWNER'S

MANUAL ARE BASED ON THE LATEST PRODUCT INFORMATION

AVAILABLE AT THE TIME OF ITS PRINTING APPROVAL, AND THE

ACCURACY OR CORRECTNESS OF THE SAME IS NOT UNDERTAKEN OR

GUARANTEED. Hero MotoCorp Ltd. RESERVES THE RIGHT TO MAKE

CHANGES IN ITS CONTENTS AT ANY TIME WITHOUT NOTICE AND/OR

INCURRING ANY OBLIGATION, WHATSOEVER. NO ONE IS ALLOWED TO

REPRODUCE ANY PART OF THIS PUBLICATION WITHOUT OBTAINING

PRIOR WRITTEN PERMISSION FROM HeroMotoCorpLtd.

RIDING 24

• FUEL GAUGE 13

SAFE RIDING TIPS 4

TIPS FOR HEALTHY ENVIRONMENT 6

• REALTIME MILEAGE INDICATOR (RTMI) 13

PRE-RIDE INSPECTION 22

• IGNITION SWITCH 12

• INSTRUMENTS & INDICATORS 10

ENGINE OIL 18

• LEFT HANDLEBAR CONTROLS 14

• FUEL TANK 17

PARTS FUNCTION 10

• STEERING LOCK 16

ENGINE OIL REPLACEMENT PROCESS 19

PRODUCT SPECIFICATION 2

• SEAT LOCK 16

ACCESSORIES & MODIFICATION 5

DESCRIPTION 7

ENGINE OIL TOP UP PROCESS 18

• RIGHT HANDLEBAR CONTROLS 15

• HELMET HANGER 16

TYRES 20

STARTING THE ENGINE 23

MOTORCYCLE IDENTIFICATION 1

PARKING / ANTI-THEFT TIPS 26

BRAKING 25

• HEADLAMP ADJUSTMENT 49

UTILITY BOX / TOOL KIT 27

• SAFETY PRECAUTION 29

• SPARK PLUG 33

• CLUTCH 38

• FRONT BRAKE 42

• REAR BRAKE 45

• AIR CLEANER 34

• DRIVE CHAIN 40

FIRST AID KIT 28

• BATTERY 46

• VALVE CLEARANCE 36

• STOP LAMP SWITCH 48

MAINTENANCE 28

• OIL SCREEN FILTER/CENTRIFUGAL FILTER 32

• MAINTENANCE SCHEDULE 30

• THROTTLE OPERATION 36

• SUSPENSION 49

• FRONT WHEEL REMOVAL 50

• REAR WHEEL REMOVAL 52

• WASHING THE MOTORCYCLE 53

• CATALYTIC CONVERTER 53

BASIC TROUBLESHOOTING 55

ROAD SIGNS 59

WARRANTY DETAILS

HERO GENUINE PARTS

• AIR SUCTION VALVE 54

Model VIN Engine

Glamour Programmed FI

(Kick Start/Drum/Cast Wheel)

AJ

EK

MBLXXXXAFYZXYYYYY

MBL

Manufacturer

Code

XXXXAF

Vehicle

Description

Y

Year of

Mfg.

Z

Assembly

Plant

X

Month of

Mfg.

YYYYY

Serial

Number

XXXXEL

Engine

Description

Y

Year of

Mfg.

Z

Assembly

Plant

X

Month of

Mfg.

YYYYY

Serial

Number

XXXXELYZXYYYYY

MBLXXXXAFYZXYYYYY

XXXXELY

ZXYYYYY

Model Code.:

MOTORCYCLE IDENTIFICATION

Glamour Programmed FI

(Electric Start/Disc/Cast Wheel)

AK

EL

Vehicle Identification Number (VIN)

VIN

125 kg (Kick) / 129 kg (Electric Start)

12 litres (minimum)

2005 mm

1070 mm

1500 + 100 r/min

In:0.05 mm Ex:0.05 mm

0.95 litre at disassembly

0.75 litre at draining

Saddle Height 790 mm

157 ml

kW

124.8 cc

ITEM SPECIFICATIONS

PRODUCT SPECIFICATION

Maximum Power

Maximum Torque 10.35 N-m @ 4000 r/min

(cold condition)

Electric Start : 20A, 15A, 10A / Kick Start : 15A, 10A

Kick / Electric Start (Optional)

(Amber bulb) with clear lens -MFR*

**MF-4:12V 3 Ah (Electric Start)

140 W @ 5000 r/min

Headlamp (High/Low)

Tail/Stop Lamp

Turn signal Lamp

Meter Illumination

Neutral Indicator

Turn Signal Indicator

Position Lamp

Hi Beam Indicator

Programmed-FI Malfunction Indicator Lamp

3.350 (67/20)

3.071 (43/14)

2.769 (36/13)

1.500 (30/20)

1.095 (23/21)

0.913 (21/23)

ITEM SPECIFICATIONS

Telescopic Hydraulic Shock Absorber

Rectangular Swingarm with 5 step

Adjustable Hydraulic Shock Absorber

Front Suspension

Rear Suspension

Front

Rear

12 V 21/5 W - MFR*

LED

12V 5.0W

LED

CHASSIS AND SUSPENSION

POWER TRANSMISSION

ELECTRICAL

LED

12V 1.12W

**MF stands for Maintenance Free

Dia 240 mm (Optional)

**MF Battery, MF-3:12V 3 Ah (Kick Start)

Do's:

1. Always conduct simple pre-ride

inspection (ref. page no 22).

2. Always wear a helmet (ISI marked)

with chinstrap securely fastened and

insist on a helmet for your pillion rider.

3. While riding, sit in a comfortable posi-

tion with your legs close to fuel tank.

5. For stopping motorcycle, use both

brakes simultaneously, keeping throttle

in the close position.

9. To make yourself more visible, wear

bright reflective clothing that fits well.

8. Give way to others on the road and sig-

nal before you make a turn.

7. During night time, dip headlamps of

your motorcycle for oncoming traffic,

or when following another vehicle.

11. Get your motorcycle serviced regularly

by the Authorised Hero MotoCorp

Workshop.

6. Respect road signs and obey traffic

rules for your own safety and that of

others on the road (ref. page no. 59-60).

10. Take care of loose / hanging clothes

while solo / pillion riding.

4. Ride defensively and at a steady speed

(between 40-50 km/hr).

motorcycle.

SAFE RIDING TIPS

4. Never touch any part of the hot exhaust

system like muffler.

Modifying your motorcycle or using non-

Hero MotoCorp accessories can make

your motorcycle unsafe. Before you

consider making any modifications or

adding an accessory, be sure to read the

following information.

Follow all instructions in this owner's

manual regarding accessories and

modifications.

Improper accessories or modifications

can cause a crash in which you can be

seriously hurt or killed.

• Be sure electrical equipment does not

exceed the motorcycle's electrical

system capacity (page-3). A blown

fuse can cause a loss of lights.

• Make sure that the accessory does not

obscure any lamps, reduce ground

clearance, limit suspension travel or

steering travel, affect your riding

position or interfere with operating any

controls.

Modifications

We strongly advise you not to remove

any original equipment or modify your

motorcycle in any way that would

change its design or operation. Such

changes could seriously impair your

motorcycle's handling, stability and

braking, making it unsafe to ride.

Removing or modifying your lamps,

mufflers, emission control system or

other equipment can also make your

motorcycle illegal.

• Do not pull a trailer or sidecar with

your motorcycle. This motorcycle was

not designed for these attachments,

and their use can seriously impair your

motorcycle's handling.

Accessories

ACCESSORIES & MODIFICATIONS

Regular Servicing: Get your motorcycle serviced at an Authorised Hero MotoCorp

workshop, as per the service schedule, for an optimum performance and keep the

emission level under check.

Genuine Engine Oil: Hero 4T Plus SAE 10W 30 SL grade (JASO MA2) engine oil

recommended by Hero MotoCorp and make sure you change it every 6000 kms.

(with top up every 3000 kilometres) to keep the engine fit and environment healthy.

The following tips shall ensure a healthy motorcycle, healthy environment, and a healthy you.

Genuine Spares: Always insist on Hero MotoCorp genuine parts as spurious or

incompatible spares and accessories can upset or deteriorate your motorcycle’s

running condition.

Noise Pollution : Noise beyond a certain decibel is pollution. Whether it is from

horns or defective mufflers, excessive noise will cause headaches and discomfort.

Emission Pollution : Get emission of your motorcycle checked by Authorised

agencies atleast once every 3 months or as notified by the government from time to

time.

Fuel Saving & Reduce Pollution : Switch "OFF" the engine while waiting at traffic

signal points to save fuel and reduce pollution, if the waiting period is long.

6

Healthy Engine: The engine is the lifeline of every vehicle. To keep it healthy, it

should be tuned regularly, which will also help reduce pollution and improve vehicle

performance & fuel efficiency.

TIPS FOR HEALTHY ENVIRONMENT

1

12

PARTS LOCATION

(1) Horn switch

(2) Turn signal switch

(4) Clutch lever

Indicator Lamp

(8) High beam indicator

(5) Pass lamp switch

(6) Rear view mirror

(7) Headlamp dimmer switch

(10) Neutral indicator

(3) Headlamp switch

(9) Programmed FI Malfunction

(14) Tripmeter knob

(16) Front brake lever

(15) Master cylinder

(17) Throttle grip

(18) Starter switch

(19) Ignition switch with steering lock

(20) Fuel tank cap

(11) Turn signal indicator

(12) Speedometer

(13) LCD panel

(21) Leg guard

4

6

14 15

17

16

18

20

21

2

5

789 10 11 13

19

DESCRIPTION

3

*Accessories and features shown may not be part of standard fitment.

12 4 578 9 11

Fuel injector

(13) Rear reflex reflector

(12) Rear turn signal lamp

(14) Tail / Stop lamp

(15) Rear grip

(16) Front reflex reflector

16

14

Starter motor

10

15

3

12

13

LEFT SIDE VIEW

6

*Accessories and features shown may not be part of standard fitment.

14

RIGHT SIDE VIEW

(1) Pillion foot rest

(3) Kick starter pedal

(4) Rider foot rest

(2) Battery compartment

(5) Oil level window

(Inside)

(6) Brake pedal

(8) Throttle body (Inside)

(10) Utility box

(9) Air suction valve

(7) Oil filler cap

(14) Headlamp

(15) Visor

(16) Exhaust muffler

(11) Caliper assembly

(12) Front brake disc

(13) Front turn signal lamp

13

15

16

*Accessories and features shown may not be part of standard fitment.

346710 11

598

212

1

2 Hi beam indicator Light glows when headlamp is in Hi beam.

Sl. No. Description Function

1 Mode / reset button Button when pressed switches display between

tripmeter and odometer. When tripmeter is

selected & button is long pressed it resets the

tripmeter to zero.

3 Programmed-FI When the ignition switch is turned "ON" the

Programmed-FI Malfunction Indicator Lamp

glows for few seconds and then should go "OFF".

It indicates that Programmed FI system is OK.

If it "flashes", or remains "ON" there is an

abnormality in the Programmed FI, it is recommended

to reduce the speed and drive to the Authorised

Hero MotoCorp workshop for check-up.

headlamp.

58

6

2

4

3

1

7

9

10

PARTS FUNCTIONS

INSTRUMENTS AND INDICATORS

Malfunction Indicator Lamp

8 Digital fuel gauge Indicates approximate fuel available.

Sl. No. Description Function

4 Neutral indicator Light glows when vehicle is in neutral.

5 Speedometer Indicates driving speed.

6 Turn signal indicator Indicates the turn signal lamp operation to

the rider.

7 Real Time Mileage Indicator It indicates the current mileage of the

(RTMI) motorcycle (in km / litre). The indication

will change after every 10 seconds

depending upon the driving condition.

(page-13).

9 Odometer Shows accumulated distance traveled.

10 Tripmeter Shows the distance traveled during a trip.

illuminates for few seconds.

The engine can be started. Turn signal

lamps, Horn, Tail / Stop lamp and Pass

lamp can be operated. Fuel gauge

indicates fuel level. Programmed FI

Malfunction Indicator Lamp

Engine cannot be started and

no electrical system will be

functional.

Key can be removed.

“ON”

“OFF”

“LOCK” Steering can be locked.

1

2

3

“OFF” Position /

Lock Open

“LOCK” Position

“ON” Position

IGNITION SWITCH

13

(1) Fuel gauge (2) Segments

FUEL GAUGE

The fuel gauge (1) is liquid crystal display

type. The approximate amount of fuel

quantity available in the fuel tank is

indicated by the number of segments in

the display. if all the segments (2) are

displayed it means fuel quantity in the

fuel tank is 12 litres.

If only one segment (3) is displayed and blinks,

this indicates that the fuel quantity is low and the

fuel tank should be refilled as soon as possible.

3

(3) Segment

12

Real Time Mileage Indicator (RTMI)

When the ignition switch is turned ON, the Real

Time Mileage Indicator will temporarily show

the digit " " which indicates that all the

digital LCD segments are working. The display

range is from (km/litre).

The Real Time Mileage Indicator (1) shows the

current mileage of the motorcycle in km / litre and

is refreshed after every 10 seconds.

1

(1) Real time mileage indicator

The fuel consumption shall be displayed

when the speed of the vehicle is 5 + 2

km/hr. If the speed is less then 5 + 2 km/hr

"_ _,_" shall be displayed.

The RTMI shows a minimum value of

km/litre and maximum value of

km/litre. During coasting with throttle

fully closed, the fuel consumption

2

3

1. Pass lamp switch

2. Headlamp switch

Position lamp

Tail / Stop lamp

Fuel indicator display

Speedometer lamp

Headlamp “ON”

marked by white dot.

LEFT HANDLEBAR CONTROLS

14

is very minimal and hence the display can

go up to km /litre.

The Odometer (4) shows accumulated

distance traveled.

NOTE :

ODOMETER

TRIPMETER

The Tripmeter (2) shows distance traveled

per trip. The Tripmeter can be reset to zero

by pressing the MODE / RESET button (3)

for more than 2 seconds.

The Tripmeter / Odometer can be selected

by pressing the MODE / RESET button

alternately.

(2) Tripmeter (3) MODE/RESET button

(4) Odometer

24

3

16

1

(1) Starter switch

6. Clutch switch (Electric start version)

be started by electric start switch until the

1. Starter switch (Electric start version)

the vehicle is in neutral. If the vehicle

Shift the turn signal switch sideways for

right / left indications and leave it to come

back to its normal position on its own.

5

4

3. Dimmer switch

IMPORTANT : To switch “OFF” the turn

signal after completing the turn, gently

push the knob inside.

4. Turn signal lamp switch

15

5.

RIGHT HANDLEBAR CONTROLS

After locking take out the ignition key.

Steering lock is with Ignition switch, put

the ignition key (2) to “OFF” position &

turn the handle bar towards left or right &

push the key downwards & turn towards

“LOCK” position.

STEERING LOCK

(2) Ignition key

2

SEAT LOCK

Location : On the rear left side of the seat,

below rear cowl.

16

Operation : Insert the key (1) and turn it

clockwise. Pull the knob (2) downward to

release the seat. To install, engage the lug

on the underside of the seat with the frame

and press on the top rear side of the seat

until the lock clicks.

HELMET HANGER

The helmet can be hung and locked on the

helmet hanger (3) provided with the seat

lock by rotating the key.

(1) Key (2) Knob (3) Helmet hanger

3

1

2

Never hold starter switch continuously for

more than 5 seconds as continuous

cranking of engine will drain the battery.

(1) Fuel tank cap (2) Key hole cover

(3) Ignition key

17

Fuel tank capacity is 12 litres (minimum).

2. Do not overfill the tank. There should

be no fuel (4) in filler neck (5).

1. To unlock fuel tank cap (1) - Lift the

key hole cover (2), insert ignition key

(3) turn it clockwise and remove the

cap.

3. To lock - Position the cap back on the

opening with the arrow mark "D" on the

cap facing towards the front of the

motorcycle then press gently. The key

springs back to the normal position and

cap gets locked.

3

2

Do not park the motorcycle under direct

sunlight as it causes evaporation of petrol

due to heat and deterioration of paint gloss

due to ultra violet rays.

4

(4) Fuel

(5) Filler neck

5

1

Page is loading ...

HERO GLAMOUR Owner's manual

This manual is also suitable for

HERO GLAMOUR Owner's manual

Related papers

Other documents