Channel Vision DP-9002 Operating instructions

Channel Vision
Brand
Channel Vision
Model
DP-9002
Type
Operating instructions

This manual is also suitable for

CHANNEL VISION
Limited Warranty
Channel Vision Technology will repair or replace any defect in
material or workmanship which occurs during normal use of this
product with new or rebuilt parts, free of charge in the USA, for two
years from the date of original purchase. This is a no hassle warranty
with no mail in warranty card needed. This warranty does not cover
damages in shipment, failures caused by other products not supplied by
Channel Vision Technology, or failures due to accident, misuse, abuse,
or alteration of the equipment. This warranty is extended only to the
original purchaser, and a purchase receipt, invoice, or other proof of
original purchase date will be required before warranty repairs are
provided.
Mail in service can be obtained during the warranty period by calling
(800) 840-0288 toll free. A Return Authorization number must be
obtained in advance and can be marked on the outside of the shipping
carton.
This warranty gives you specific legal rights and you may have other
rights (which vary from state to state). If a problem with this product
develops during or after the warranty period, please contact Channel
Vision Technology, your dealer or any factory-authorized service
center.
500-126 RevA
234 F
ISCHER AVENUE •C
(714) 424-6500 • (800) 840-0288 • (714) 424-6510 fax
www.channelvision.com • email: [email protected]
© 2005, CHANNEL VISION™
OSTA MESA, CA 92626
DP-Series
Door Intercom
Includes models:
DP-0xxx, DP-5xxx, DP-6xxx
DP-0xxxP, DP-5xxxP, DP-6xxxP
2
Channel Vision’s -Series are 1/4" solid brass door plates that interface
with other products to provide communication with the front door. It is
available in a variety of configurations including options for a hidden camera
and compatibility with Panasonic’s popular KSU phone systems. It comes
with the or (depending on the finish color). It is compatible
with the
DP
DP-9001 DP-9002
DP-Rbox-II flush mount box, which is sold separately.
Understanding the model number:
(DP-0212P shown for example only)
Part numbering: DP door plates
DP-0212P
Blank TE110/C-0920 compatible
P Panasonic compatible
212 White
222 Polished Brass
232 Antique Brass
242 Chrome
252 Oil Rubbed Bronze
262 Antique Copper
272 Satin Silver
282 Black
302 Satin Nickel
0 No camera
5 Black and white camera
6 Color camera
Features:
h
h
h
h
1/4” thick solid brass plate
Discrete speaker and microphone
Fits the DP-Rbox-II flush mount box, and the DP-9001, DP-9002 surface
mount boxes.
Available in many finishes
6”
7
/
16
4/”
3
8
1/”
3
4
DP-9000 and DP-9001
Surface Mount Box
(included)
6”
7
/
16
4/”
3
8
DP-Series Faceplate
(included)
6”
7
/
18
4/”
3
8
3/”
1
4
DP-Rbox-II
Flush Mount Box
(
optional
)
Specifications:
Speaker:
Dimensions:
Black & White camera: (DP-5xxx & DP-5xxxP only)
Color camera: (DP-6xxx & DP-xxxP only)
Size (mm):
Depth (in):
Impedance:
Power Peak (W):
Frequency Range:
DP-Series plate only:
DP-Series assembly:
Camera Lens:
Resolution:
S/N Ratio:
Min Illumination:
Power Supply:
Power Consumption:
Video Output:
Dimensions:
Operating Temp:
Camera Lens:
Resolution:
S/N Ratio:
Min Illumination:
Power Supply:
Power Consumption:
Video Output:
Dimensions:
Operating Temp:
50
1.5
8 Ohms
0.2
500 Hz - 4.5 kHz
6 ½” (L) x 4 / ” (W) x / ” (D)
6½”(L)x4 /”(W)x1 /”(D)
3.8mm
500 lines
More than 48 dB
0.05 LUX @ F2.0
12VDC regulated
110 mA
1 Vp-p @ 75 ohms
(see instruction for the 5401B/W camera)
-10°C to 50°C (14°F to 122°F)
3.8mm
380 lines
More than 48 dB
0.4 LUX @ F2.0
12VDC regulated
120 mA
1 Vp-p @ 75 ohms
(see instruction for the 6401 color camera)
-10°C to 50°C (14°F to 122°F)
31
33
84
84
Specifications subject to change without notice.
7
Installation:
h
h
Install a compatible mounting box at the desired location, such
as:
If necessary, attach the camera’s video output to a coax
extension that is long enough to reach your monitor or video
distribution equipment.
If necessary, cut the connector off of the end of the power
supply and splice in
h
h
Using a 2-conductor wire, connect you Panasonic KSU to the
empty screw terminal block on the DP (see diagram).
an extension using crimp-on
connectors.
DP-Rbox-II flush mount box, DP-9001surface mount
box, or DP-9002 surface mount box.
Channel Vision’s -5xxxP & -6xxxP Series are 1/4" solid
brass door plates with integrated mini cameras. They are
The -
5xxxP contains a Black & White camera, while the -6xxxP
contains a color camera. ese s
DP DP
a
compatible replacement for the Panasonic KXT30865. DP
DP
Th product interface with
Panasonic’s KSU phone systems to provide communication with
Video
(BNC Connector)
Power
2-Conductor power
supply extension
(not included)
Crimp-on splice
connectors
(not included)
To Monitor
or
Video distribution
Coax extension
(not included)
Panasonic compatible with camera
Review your Panasonic
manual for connection details.
6
Camera
Panasonic compatible
DP-series
Panasonic
KSU
3
Installation:
h
Install a compatible mounting box at the desired location, such
as:
h
h
Using a 2-conductor wire, connect the TE110 (C-0920) to the
empty screw terminal block on the DP (see diagram).
Adjust speaker volume to the desired level.
DP-Rbox-II flush mount box, DP-9001surface mount
box, or DP-9002 surface mount box.
Channel Vision’s DP-Series are 1/4" solid brass door plates that
interface with the Channel Vision TE110 or C-0920 to provide
communication with the front door. A standard single gang
junction box is supplied with each DP-Series unit.
Power
Line
Te l
Intercom
Strike duration
Seconds S1 S2 S3
3
5
8
15
20
40
120
240
off
on
off off
on
off
on
off
on
off
off
on
on
off
off
on
on
off
off
off
on
on
on
on
On
Off
#ofrings
2x3 ring
patern
Key on
phone
Yes
No
#
*
S4
S5
S6
3
5
TE110 (C-0920)
Telephone Entry Board
Volume adjustment
Turn clockwise to
increase volume.
Channel Vision compatible (model DP-0xxx)
Installation:
h
h
Install a compatible mounting box at the desired location, such
as:
If necessary, attach the camera’s video output to a coax
extension that is long enough to reach your monitor or video
distribution equipment.
If necessary, cut the connector off of the end of the power
supply and splice in
h
h
Using a 2-conductor wire, connect the TE110 (C-0920) to the
empty screw terminal block on the DP (see diagram).
an extension using crimp-on
connectors.
DP-Rbox-II flush mount box, DP-9001surface mount
box, or DP-9002 surface mount box.
Channel Vision’s DP-5xxx & DP-6xxx Series are 1/4" solid brass
door plates with integrated mini cameras. They interface with
the Channel Vision TE110 or C-0920 to provide audio and video
communication with the front door. The DP-5xxx contains a
Black & White camera, while the DP-6xxx contains a color
camera.
Power
Line
Te l
Intercom
Strike duration
Seconds S1 S2 S3
3
5
8
15
20
40
120
240
off
on
off off
on
off
on
off
on
off
off
on
on
off
off
on
on
off
off
off
on
on
on
on
On
Off
# of rings
2x3 ring
patern
Key on
phone
Yes
No
#
*
S4
S5
S6
3
5
Speaker volume
adjustment
Power
Crimp-on splice
connectors
(not included)
To Monitor
or
Video distribution
Coax extension
(not included)
Video
(BNC Connector)
2-Conductor power
supply extension
(not included)
Channel Vision compatible with camera
4
Installation:
h
h
h
Install a compatible mounting box at the desired location, such
as:
Using a 2-conductor wire, connect the door phone output of
your Panasonic KSU to the empty screw terminal block on the
DP (see diagram).
Consult your Panasonic manual for instructions regarding door
phone operation.
DP-Rbox-II flush mount box, DP-9001surface mount
box, or DP-9002 surface mount box.
Channel Vision's Panasonic Series models are a compatible
replacement for the Panasonic KXT30865. These 1/4" solid
brass door plates provide an attractive alternative to the
standard plastic door station sold by Panasonic.
DP
This product
interfaces with Panasonic’s KSU phone systems to provide
communication with the front door.
Panasonic compatible (model DP-0xxxP)
Panasonic
KSU
Review your Panasonic manual
for connection details.
5
Model DP-0xxxP
(a compatible replacement for the
Panasonic KXT30865)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Channel Vision DP-9002 Operating instructions

Channel Vision
Brand
Channel Vision
Model
DP-9002
Type
Operating instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents