Siemens SIMATIC PCS 7 OSx User manual

SIMA

TIC PCS 7 OSx

Hardware Manual

(PA–RISC)

Order

Number: 6ES7 6550XX028BB1

Manual Assembly Number: 2807185–0001

Original Edition

!

DANGER

indicates an imminently hazardous situation that, if not avoided, will

result in death or serious injury

.

DANGER is limited to the most extreme situations.

!

WARNING

W

ARNING indicates a potentially hazardous situation that, if not avoided, could

result in death or serious injury, and/or property damage.

!

CAUTION

CAUTION indicates a potentially hazardous situation that, if not avoided, could

result in minor or moderate injury, and/or damage to property

.

CAUTION is also used for property-damage-only accidents.

Copyright

1998 by Siemens Energy & Automation, Inc.

Reproduction,

transmission, or use of this document or contents is not permitted without express consent of Siemens Energy &

Automation, Inc. All rights, including rights created by patent grant or registration of a utility model or design, are reserved.

Since Siemens Energy & Automation, Inc., does not possess full access to data concerning all of the uses and applications of

customers’ products, we do not assume responsibility either for customer product design or for any infringements of patents or rights

of others which may result from our assistance.

MANUAL PUBLICA

TION HISTOR

Y

SIMATIC PCS 7 OSx 4.0.0 Hardwar

e Manual (P

A–RISC)

Or

der Manual Number: 6ES7 6550XX028BB1

Refer to this history in all correspondence and/or discussion about this manual.

Event Date Description

Original Issue

6/98

Original Issue (2807185–0001)

LIST

OF EFFECTIVE P

AGES

Pages Description

Cover/Copyright Original

History/Effective

Pages

Original

Trademarks Original

iii — ix Original

1-1 — 1-24 Original

2-1 — 2-7 Original

A-1 — A-10 Original

B-1 — B-5 Original

C-1 — C-3 Original

Index-1 — Index-2

Original

Registration Original

Trademarks

SIMATIC and SINEC are registered trademarks of Siemens AG.

PCS is a trademark of Siemens Energy & Automation, Inc.

Excel is a trademark and Windows is a registered trademark of Microsoft Corporation.

Intel and Pentium are registered trademarks of the Intel Corporation.

Lancast is a registered trademark of CASAT Technology, Inc.

Lotus and 1Ć2Ć3 are registered trademarks of Lotus Development Corporation.

NetBlazer and Telebit are registered trademarks of the Telebit Corporation.

Tektronix is a registered trademark of Tektronix, Inc.

UNIX is a registered trademark of X/Open Company, Ltd.

VMS is a registered trademark of Digital Equipment Corporation.

Contents iii

Contents

Preface vii

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Chapter 1 Hardware Overview 1-1.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.1 Overview

of System Components

1-2.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.2 Hardware

Assemblies

1-4.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SIMATIC

PCS 7 OSx System

1-4.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Optional

Printers

1-5.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

System

Cabling

1-5.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Power

Requir

ements 1-5.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.3 Equipment

Storage Requir

ements 1-6.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Equipment

Carton W

eights and Dimensions

1-7.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Media

Storage

1-8.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Spare

Parts Storage

1-8.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.4 Equipment

Physical Dimensions

1-9.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Subassembly

Dimensions

1-9.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Additional

Space Requir

ements 1-9.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.5 Power

Requir

ements 1-10.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Power

Supply Specifications

1-10.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

AC

Power Requir

ements 1-11.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Earth

Gr

ound 1-12.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Minimizing

Ef

fects of Electrical Noise

1-13.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Static

Electricity and Lightning

1-13.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.6 Control

Room Envir

onment Specifications

1-14.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Environment

Pr

eparation Guidelines

1-14.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Lighting 1-15

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Floor

Coverings

1-15.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.7 Fire

Pr

otection Considerations

1-16.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.8 Site

Planning Checklist

1-17.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.9 Connecting

Input Devices

1-18.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Installing

the Keyboar

ds and Pointing Device

1-18.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Installing

the Engineering Keyboar

d 1-19.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.10 Connecting

the Monitor

1-20.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

iv Contents

1.11 Connecting

the System to the Industrial Ether

net 1-21.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.12 Connecting

Options: Printer

1-22.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.13 Connecting

Options: S7-200 CPU 212 Alar

m Option

1-23.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.14 Connecting

Options: Magneto-Optical Drive

1-24.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Before

Y

ou Start

1-24.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Connecting

the MO Drive Option

1-24.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

If

Y

ou Need Help

1-24.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Chapter 2 Optional Card Locations 2-1.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.1 Card

Locations

2-2.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.2 Installing

a Second Ether

net Car

d 2-4.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.3 System

Diagnostics

2-6.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Appendix A Alarm Applications/Failover Option A-1.

. . . . . . . . . . . . . . . . . . . . . . .

A.1 S7–200

CPU 212 CPU Specifications and Pin-out Data

A-2.

. . . . . . . . . . . . . . . . . . . . . . . . . . . .

Input

Channels

A-2.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Output

Channels

A-2.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

External

Connector

A-3.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

A.2 Application

1: Single Alar

m A-4.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

A.3 Application

2: Dual Alar

ms A-6.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

A.4 Connecting

Options: Failover Cir

cuit A-8.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Failover

Cir

cuit Length Calculation

A-10.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Appendix

B

Routine Maintenance B-1.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

B.1 General

Operating Pr

ocedures B-2.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Overview B-2

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Avoiding

Exter

nal Inter

ference B-2.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Handling

Floppy Diskettes, CDs, and Magneto-Optical Disks

B-3.

. . . . . . . . . . . . . . . . . . . . . .

B.2 Scheduled

Maintenance

B-4.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Recommended

Cleaning Pr

ocedures B-4.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Checking

Pictur

e Quality

B-4.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Maintaining

Disk Drives

B-5.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Appendix

C

Uninterruptible Power Supply C-1.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

C.1 Overview C-2.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

General

Description

C-2.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Power

Cabling

C-2.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Index Index-1.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Contents v

List of Figures

1-1 System

Component Connections

1-3.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1-2 Isolating

Gr

ound and Neutral from Conduit

1-12.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1-3 Installing

the Engineering and Operator Keyboar

ds 1-18.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1-4 Installing

the Engineering Keyboar

d 1-19.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1-5 Connecting

the Monitor

1-20.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1-6 Connecting

the Ether

net Cables to the System Unit

1-21.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1-7 Connecting

the Printer (Optional)

1-22.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1-8 Connecting

the OSx Station to the S7-200 CPU 212

1-23.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-1 System

Unit Car

d Locations

2-3.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-2 System

Diagnostics Scr

een 2-6.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

A-1 Single

Alar

m A-4.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

A-2 Dual

Alar

ms A-7.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

A-3 Failover

Cable W

iring Diagram

A-9.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

C-1 Cabling

Diagram (2 KV

A UPS)

C-2.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

vi Contents

List

of T

ables

1-1 Storage

Envir

onment Specifications

1-6.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1-2 Equipment

Carton W

eights and Dimensions

1-7.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1-3 PA

RISC Physical Dimensions

1-9.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1-4 Power

Specifications

1-10.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1-5 Environmental

Specifications

1-14.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-1 Bezel

Positions for System Unit Car

ds 2-2.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

A-1 S7–200

CPU 212 Power Specifications

A-2.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

A-2 S7–200

CPU 212 Output Connectors

A-3.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

A-3 S7–200

CPU 212 JP3 Pinout

A-8.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

C-1 System

Current and V

oltage V

alues C-3.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Preface

vii

SIMATIC PCS 7 OSx 4.0.0 Hardware (PA RISC)

Preface

The

SIMA

TIC PCS 7 OSx 4.0.0 Hardware Manual (P

A–RISC)

includes

installation procedures, hardware descriptions, and maintenance

information about the B132L+ model of SIMA

TIC PCS 7 OSx.

•

Chapter 1

describes the SIMA

TIC PCS 7 OSx hardware components

and how they connect to the system.

•

Chapter 2

describes card locations and explains how to use system

diagnostics.

The

HP Model B132L/B132L+/B160L/B180L Owner

’

s Guide

that is

packed with your B132L+ computer gives further information about

installing and using hardware components.

The OSx manual set consists of several manuals. If you cannot find the

information that you need in the

SIMA

TIC PCS 7 OSx Hardware Manual

(P

A RISC)

, check these other books:

• SIMA

TIC PCS 7 OSx System Administration Manual

This manual

offers help in configuring network nodes, and for procedures that

describe how to configure printers, how to archive data, and how to

back up files.

• SIMA

TIC PCS 7 OSx Process Configuration Manual

This manual

describes the primary tasks required to configure your system for

controlling your process.

• SIMA

TIC PCS 7 OSx Graphical Editor Manual

This manual

describes how to create the graphical displays used with OSx.

• SIMA

TIC PCS 7 OSx Reports Manual

This manual describes how to

create reports on your process and your configuration.

• SIMA

TIC PCS 7 OSx Recipe Manual

This manual describes more

advanced configuration tasks involving the creation and use of recipes.

Purpose of This

Manual

What’s in the Other

Manuals?

Preface

viii

SIMATIC PCS 7 OSx 4.0.0 Hardware (PA RISC)

• SIMATIC

PCS 7 OSx Batch Programming Manual

This manual

describes more advanced configuration tasks involving the use of BCL,

the Batch Control Language, and the creation of batch programs.

• SIMA

TIC PCS 7 OSx Operator Manual

This manual is written for the

configuration engineer

, but it describes how to carry out the various

tasks that the process operator must do when the system is in the

Operate state.

• SIMA

TIC PCS 7 OSx Interface to S5 Controllers Manual

This manual

describes the OSx interface with SIMA

TIC S5 controllers.

• SIMA

TIC PCS 7 OSx Interface to S7 Controllers Manual

This manual

describes the OSx interface with SIMA

TIC S7 controllers.

• SIMA

TIC PCS 7 OSx Library Manual

This manual describes the

function blocks used to program the S7-400 controllers to interface with

OSx.

Be sure to check the Readme File for information that did not become

available until after the publication deadlines for the OSx manuals. Select

Help→About OSx

from the main menu bar

, and then click the

Show Readme

button

at the bottom of the About OSx dialog box.

The following manuals are available for optional PCS features.

• SIMA

TIC PCS 7 OSx Remote

T

erminal User Manual

This manual

describes the optional remote

terminal support provided by PCS 7. This

manual, which is purchased separately

, describes how to configure and

operate a remote terminal that can connect to an OSx station by means

of a telephone line.

• SIMA

TIC PCS 7 OSx X

T

erminal User Manual

This manual describes

how to connect and operate an X

terminal as an extension of an OSx

station.

Optional PCS

Features

Preface

ix

SIMATIC PCS 7 OSx 4.0.0 Hardware (PA RISC)

• SIMATIC

PCS 7 OSx Remote Data T

ransfer Manual

This manual

describes the remote data transfer feature, which allows you to

transmit data collected from the process by an OSx station to an Oracle

or Sybase database on the remote computer for historical records and

other purposes.

• SIMA

TIC PCS 7 OSx @aGlance User Manual

This manual describes

how to import OSx data into a W

indows

application, such as Excel

or

Lotus1-2-3,

or into another UNIX

or

VMS application.

If you have difficulty with your system, contact the Siemens Energy &

Automation, Inc., T

echnical Services Group in the U.S.A. at 423–461–2522,

or outside the U.S.A. at 49–91

1–895–7000.

If Y

ou Need Help

Hardware Overview

1-1

SIMATIC PCS 7 OSx 4.0.0 Hardware (PA RISC)

Chapter 1

Hardware

Overview

1.1 Overview

of System Components

1-2.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.2 Hardware

Assemblies

1-4.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SIMATIC

PCS 7 OSx System

1-4.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Optional

Printers

1-5.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

System

Cabling

1-5.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Power

Requir

ements 1-5.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.3 Equipment

Storage Requir

ements 1-6.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.4 Equipment

Physical Dimensions

1-9.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.5 Power

Requir

ements 1-10.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Power

Supply Specifications

1-10.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

AC

Power Requir

ements 1-11.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Earth

Gr

ound 1-12.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Minimizing

Ef

fects of Electrical Noise

1-13.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Static

Electricity and Lightning

1-13.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.6 Control

Room Envir

onment Specifications

1-14.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.7 Fire

Pr

otection Considerations

1-16.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.8 Site

Planning Checklist

1-17.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.9 Connecting

Input Devices

1-18.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Installing

the Keyboar

ds and Pointing Device

1-18.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Installing

the Engineering Keyboar

d 1-19.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.10 Connecting

the Monitor

1-20.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.11 Connecting

the System to the Industrial Ether

net 1-21.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.12 Connecting

Options: Printer

1-22.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.13 Connecting

Options: S7-200 CPU 212 Alar

m Option

1-23.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.14 Connecting

Options: Magneto-Optical Drive

1-24.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Before

Y

ou Start

1-24.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Connecting

the MO Drive Option

1-24.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

If

Y

ou Need Help

1-24.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Hardware Overview

1-2

SIMATIC PCS 7 OSx 4.0.0 Hardware (PA RISC)

1.1 Overview of System Components

Figure 1-1

shows the locations for the hardware connections to a SIMA

TIC

PCS 7 OSx station. The following sections describe the component

connections.

•

Connecting input devices,

Section 1.9

•

Connecting the monitor

,

Section 1.10

•

Connecting the system to the Industrial Ethernet network,

Section 1.11

• Connecting

options: printer

,

Section 1.12

•

Connecting options: S7–200 CPU 212 alarm option,

Section 1.13

•

Connecting options: magneto-optical drive,

Section 1.14

!

CAUTION

This

is an FCC Class A product intended for use in industrial environments.

Use of this product in a domestic environment may cause radio frequency

interference, which may disrupt other electronic equipment.

If you are using this product in a non-industrial, non-scientific environment,

take proper installation precautions.

Hardware Overview

1-3

SIMATIC PCS 7 OSx 4.0.0 Hardware (PA RISC)

Keyboard

Ethernet

2 (Optional)

Ethernet 1 (LAN-AUI)

Power

Pointing Device

Printer

(Optional)

SCSI (Not Used)

SCSI to Magneto-Optical Drive (Optional)

Handle

Ethernet (LAN-TP)

Monitor

12

Serial port 1 (optional S7200 CPU 212 alarm)

Serial port 2

Figure 1-1 System Component Connections

Hardware Overview

1-4

SIMATIC PCS 7 OSx 4.0.0 Hardware (PA RISC)

1.2 Hardware Assemblies

The

SIMA

TIC PCS 7 OSx system consists of the following major

subassemblies.

The

System Unit

(Model B132L+) controls the scheduling and the

gathering of data from the Industrial Ethernet network. The system unit

makes decisions on what to do with the gathered data based upon the

database configuration. It contains the real time relational database, system

software packages, system RAM memory

, and network interface.

The

21-Inch Monitor

provides 256 colors and 1280 x 1024 pixel resolution.

The

Engineering

Keyboard

allows you to configure the system, to design

reports, and to program. The engineering keyboard is of standard

construction, but is configured to function like an operator keyboard and

can be used in the Operate state.

The

Operator

Keyboard

allows you to access process graphics and

displays, to enter new values, and to print reports. The operator keyboard is

constructed of a factory-hardened, tactile membrane, with a port that can be

used to link up with a PS/2 mouse or trackball, and a standard engineering

keyboard. Only PS/2 pointing devices are supported by the operator

keyboard.

The

Pointing

Device

(T

rackball/Mouse) is used for moving quickly among

the menu and screen-selections, and for drawing shapes in the graphics

editor.

The

Magneto-Optical

Drive

is used for data archiving.

The

CD-ROM

is used for loading software and for accessing the SIMA

TIC

PCS 7 OSx manual set.

The

Hard

Disk Drive

serves as the mass storage device for the system

unit. It consists of one 2 Gbyte+ formatted capacity drive.

The

Ethernet Communications Board

allows the OSx station to be

attached to an Ethernet network.

The

S7–200 CPU 212

provides

connection to the failover circuit and

external warning and critical alarms.

SIMA

TIC PCS 7 OSx

System

Hardware Overview

1-5

SIMATIC PCS 7 OSx 4.0.0 Hardware (PA RISC)

OSx

supports several optional printers. Printers can be set up to provide

hard copies of reports, alarm messages, operator change messages, tag lists,

system messages, screen print, etc. See the

SIMA

TIC PCS 7 OSx System

Administration Manual

for additional information.

Figure 1-1

on page 1-3

shows cable connections for OSx stations.

Information about input voltage selection, servicing data, and general

subassembly descriptions is listed in this chapter

.

NOTE:

An Uninterruptible Power Supply (UPS) is recommended to ensure

continuous operation during AC power failures. Refer to

Appendix C

for

UPS cabling information.

Optional Printers

System Cabling

Power

Requirements

Hardware Overview

1-6

SIMATIC PCS 7 OSx 4.0.0 Hardware (PA RISC)

1.3 Equipment Storage Requirements

Before

receiving your system, prepare a storage area for the equipment

boxes so you can use them later

, if required. Y

our equipment must be stored

in a clean environment to prevent system component damage.

T

able 1-1

lists storage environment specifications.

Table 1-1 Storage Environment Specifications

Parameter Range or Description

Storage temperature

–25°C to 70°C

Relative humidity 15% to 80% non-condensing

Contaminants to be avoided

Dust

Smoke

Corrosive chemicals

Toxic gases

!

CAUTION

Motors, copy machines, and similar devices used near equipment can destroy

stored data and distort monitor color purity

.

Keep equipment away from transformers and other sources of electromagnetic

fields.

Hardware Overview

1-7

SIMATIC PCS 7 OSx 4.0.0 Hardware (PA RISC)

T

able 1-2

lists equipment carton weights and dimensions.

Table 1-2 Equipment Carton Weights and Dimensions

Subassembly Height Length Width Weight

System Unit (Model B132L+)

1

1.5 in.

29.2 cm

26.0 in.

66.0 cm

24.0 in.

61.0 cm

54.0 lbs.

24.5 kg

Color Monitor

, 21-inch

24.0 in.

61.0 cm

26.0 in.

66.0 cm

28.0 in.

71.1 cm

75.0 lb.

34.1 kg

Color Monitor

, 17-inch

22.0 in.

55.8 cm

22.0 in.

55.8 cm

24.0 in.

61.0 cm

44.0 lbs.

20.0 kg

Keyboard and Mouse

6.0 in.

15.2 cm

21.3 in.

53.3 cm

10.8 in.

27.3 cm

12.0 lbs.

5.44 kg

Operator Keyboard

7.0 in.

17.81 cm

14.5 in.

36.8 cm

20.0 in.

50.8 cm

16.0 lbs.

7.26 kg

Trackball

5.0 in.

12.7 cm

6.5 in.

16.5 cm

9.75 in.

24.8 cm

2.0 lbs.

1.1 kg

Magneto-Optical Disk Drive

(optional)

9.0 in.

22.9 cm

17.3 in.

43.8 cm

12.3 in.

31.1 cm

12.0 lbs.

5.44 kg

Equipment

Carton

W

eights and

Dimensions

Hardware Overview

1-8

SIMATIC PCS 7 OSx 4.0.0 Hardware (PA RISC)

Equipment

Storage Requir

ements (continued)

When

determining your overall space requirements, include space for

storing software media. Choose a storage area that protects software media

from the following hazards.

•

Magnetic fields

• Dust

• Smoke

• Humidity

•

Process by-products (e.g., corrosive chemicals, toxic gases)

• T

emperature extremes (ensure that the –25



C to 50



C range is

maintained)

Select a cabinet that is approved for storage by an applicable agency

, such

as Underwriters Laboratories (UL).

Overall space requirements should also include provisions for storing spare

parts. Choose a storage area that meets equipment storage specifications.

Refer to

T

able 1-1

and

T

able 1-2

for environmental considerations and space

requirements.

Media Storage

Spar

e Parts Storage

Page is loading ...

Siemens SIMATIC PCS 7 OSx User manual

Siemens SIMATIC PCS 7 OSx User manual

Related papers

Other documents