LOOPING PAR63/P630+ User manual

Brand
LOOPING
Model
PAR63/P630+
Category
Baby furniture
Type
User manual
P.1
IMPORTANT ! RETAIN FOR FUTURE REFERENCE :
READ CAREFULLY. FAILURE TO FOLLOW THE GIVEN
SAFETY NOTES MAY RESULT IN SERIOUS INJURY.
- 1 main structure
- 1 padded support
- 1 transport bag
- 2 handles (to be used in playpen function only)
Remark : No tool is required to assembly the product.
Index 01/09.09.15
PLAYPEN
Ref.: PAR63/P630+
CONTENT
GENERAL FEATURES
COMPLY WITH EUROPEAN
STANDARDS EN 12227 (2010)
AND EN 716-1 (2008) + A1
This product is intended to be used by one child at a time.
Suggested age and weight of child : from 0 to 36 months and/or from 3 to 15kg.
2 functions :
- bed (with door closed and locked imperatively)
- playpen
I
N
S
T
R
U
C
T
I
O
N
M
A
N
U
A
L
All photos and schemas provided in this
instruction manuel is for reference only
and may not be contractuel. They may
subject to changes at any moment due to
technical and/or commercial reasons.
i
! !
Read this instruction manual
carefully before use !
Locking systems on
4 raiguards 2 Handles
Padded support
included
Door with zipper
P.2
B
- THE DOOR CAN ONLY BE OPENED WHILE THE PRODUCT IS USED AS A PLAYPEN.
- PLAYPEN FUNCTION CAN BE USED (DOOR OPENED) ONCE THE CHILD CAN SIT UP
UNAIDED. THIS USAGE MUST BE SUPERVISED BY AN ADULT.
- WHEN THE DOOR IS IN PLACE, ENSURE THAT THE ZIPPER IS COMPLETELY CLOSED.
THE CHILD INSIDE THE PRODUCT MUST NOT BE ABLE TO OPEN THE DOOR BY ITSELF.
IMPORTANT : BEFORE USE, CHECK THAT THE LOCKING SYSTEMS
OF EACH OF THE 4 RAILGUARDS ARE WELL ENGAGED.
ASSEMBLY OF PRODUCT
FOLDING OF PRODUCT
1.
Unfasten the 6 xation straps which were attached to the underneath of the product base. Remove the pad-
ded support and lift the base completely by pulling it upward. (Schema E) The legs must remain apart.
2. Grip the railguard around middle, lightly pull it upward. While pressing the folding device (identied by
a printed sign), swing it left and right to release the lock and lower the railguard (Schema F). A completely
released device should show a U-shape, not a V-shape. Repeat the same operations for the other 3 sides.
3. Gather the 4 legs. (Schema G)
4. Fold the padded support and fasten the straps. Slide the product inside the folded support (Schéma H) and
arrange the whole inside the transport bag (schema I).
E
G
H
F
I
D
Padded support
Base of product
Velcros
Fixation straps Button holes
E x 6
YES NO
IMPORTANT : NEVER FORCE THE RAILGUARDS DURING THE FOLDING PROCESS.
REPEAT THE UNLOCKING OPERATIONS SEVERAL TIMES IF REQUIRED.
AC
1. Open the bag and remove the product from it.
2. Stand the product with its 4 legs on oor. Unfasten the straps which hold the product folded. (schema A)
3. Pull apart the legs, at the same time hold the centre of the base high up.
Lift the 4 railguards of the product until the locking system of each of them engages (schema B).
4. Hold the product, gently press down the center of the base until it lies at
(schema C).
5.
Place the padded support inside the product (Schema D) and secure it to the base of the product with the
aide of the 6 xation straps. Slide the straps through the button holes and x them under the base of the product
(Schema E).
SAFETY NOTES TO BE RESPECTED IMPERATIVELY.
- Intended for children
from 0 to 36 months and/or from 3 to 15 kg. This
product is not intended for children more than 15kg.
-
WARNING - Ensure that the bed/playpen is fully erected and all the
locking mechanisms engaged before placing your child in this bed/playpen.
-
WARNING - Do not place the bed/playpen close to an open re or other heat
source, such as electric bar res, gas res...etc.
- Never place this product somewhere your child can have access to
dangerous objects, medicines, strings, blind/curtain cords etc...
- Never place this product in near vicinity of electricity plugs, light and
electricity cords etc.
- WARNING - Never leave anything in the playpen which could provide
foothold or create a danger of suffocation or strangulation.
- Do not use the bed/playpen if any part is broken, torn or missing and use
only spare parts / accessories approved by the manufacturer. Do not use
any accessories which are not approved by the manufacturer.
- This product must not be used without its original padded support
provided by the manufacturer. Do not use more than one mattress in
the cot.
Thickness of the mattress (padded support) shall be such that the
internal height (surface of the mattress to the upper edge of the cot frame)
is at least 500mm in the lowest position of the cot base and at least 200mm
in the highest position of the cot base. The minimum size of mattress . The
length and width of th mattress shall be such that the gap between the
mattress and the sides and ends does not exceed 30mm.
- Never fold or displace the product with a child inside.
-
Check reguarly the general status of the product (ex stitching, locking
system...etc). All assembly tting should always be tightened properly. Ensure
that no screw dislodges from the product, because any protruding part may
hook or hang part of child’s body or his clothing (ex cord, collar or soother
holder...etc) that could induce danger of strangulation. Retighten the tting as
necessary.
- Never place more than one child inside the bed/playpen
AVERTISSEMENT !
P.4
END OF LIFE OF PRODUCT
REFERENCE
MAINTENANCE
At the end of life of the product, do not dispose it in a site which is not intended for
this purpose. This product must be treated as a bulky waste and carried to a recycling
center or waste sorting center.
Lubricate the mechanical parts (sliding, moving and/or adjustable parts etc) by using dry
silicone-based lubricants when necessary. Clean regularly the fabric parts with a damp cloth.
Air dry. Do not iron.
Check the status of the product periodically.
The product should be stored in a mild environment of which the temperature is between 8ºC
to 30ºC. Avoid conditions lower than 0ºC or higher than 30ºC.
France
ABB Diffusion - 13 RUE VOLTAIRE, 82000 MONTAUBAN
Product reference PAR63/P630+
Made in China
www.looping-baby.com contact@looping-baby.com
- When door closed, verify that it’s well in place; the zip is closed up to its
end. Make sure that the child cannot open the door by itself.
- Not intended for a child more than 15kg. When the child can sit up by
itself, you can consider opening the door. This usage must be supervised
by an adult.
- WARNING - do not use the playpen without the base (padded support).
- Never leave your child unattended.
WARNING SPECIFIED FOR THE BED FUNCTION (DOOR
IMPERATIVELY CLOSED AND WELL FASTENED. NO HANDLE.)
WARNING SPECIFIED FOR THE PLAYPEN FUNCTION
(DOOR OPENED OR CLOSED. WITH OR WITHOUT HANDLE)
- Never place one more than one child inside the bed.
- The door must imperatively be closed and well fastened. Ensure that
the door is closed; the zip is closed up to its end. Make sure that the child
inside cannot open the door by itseld.
- Never use the handles while the product is used as bed.
- To prevent injury from falls, when the child is able to climb out of the cot,
the cot shall no longer be used for that child.
- Be aware of the risk of open re and other sources of strong heat, such
as electric bar res, gas res, etc. in the vicinity of th cot.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

LOOPING PAR63/P630+ User manual

Brand
LOOPING
Model
PAR63/P630+
Category
Baby furniture
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents