Member's Mark Revella L-GZ806PST-A2 Step-By-Step Instructions

Congratulations on your purchase of Revella Gazebo. Our clear, easy to follow, step-by-step

instructions will guide you through the assembly process from start to finish.

WARNING:

 Do not assemble this item alone. 4-6 people are recommended for safe assembly.



Keep all children and pets away from assembly area. Children and pets should be supervised

when they are in the area of the Gazebo construction.

 Keep assembly area at least 6ft/1.8m from any obstruction such as a fence, garage, house,

overhanging branches, laundry line or electrical wires.

 Some parts may contain sharp edges. When assembling and using this product, basic safety

precautions should always be followed to reduce the risk of personal injury and damage to the

product. Please read all instructions before assembly and use.

 Check all bolts for tightness before use and periodically check and tighten bolts as necessary.

 Assemble on level ground.

 For outdoor use only.

Revella Gazebo

Item# L-GZ806PST-A2

IMPORTANT

Please take time to read these instructions thoroughly and follow each step carefully for safe and

easy operation. Keep this manual for future reference.

We would like to hear from you with any comments or suggestions. In the continental U.S., you

can call us toll-free at 1-888-301-0332 from 8 a.m. to 5 p.m. CST Monday – Friday. You can also

send us an email using the feedback icon at SamsClub.com.

Call centre for missing parts: 1-866-578-6569 from 8:30 a.m. to 4:30 p.m. CST



Post A 4

Stake Sheet A1 4

Long Screen 1 B1 2

Long Screen 2 B2 2

Short Screen 1 C1 2

Short Screen 2 C2 2

Sleeve D 4

Short Mosquito Netting

Tube

E1 4

Long Mosquito Netting

Tube

E2 4

Oblique Beam

Connector

F 4

Middle Beam

Connector

G 4

Oblique Beam H 4

Oblique Beam Tube H1 4

Middle Beam I 4

Middle Beam Tube I1 4

Long Tube J 2

Short Tube K 2

Corner L 4

Small Top Oblique

Beam

M 4

Hook N 1

Top Beam O 1

Small Canopy P 1

Big Canopy Q 1

Mosquito Netting R 1

PartsList



 



Hardware Pack 1

AA Bolt M6x20 72pcs

BB Flat Washer M6 88pcs

CC Bolt M6x40 16pcs

DD Nut M6 8pcs

W Wrench M6 2pcs







 



 







Fig.1: Insert Long Screen

2 (B2) into Long Screen 1

(B1) and fix them by Bolt

(AA), Flat Washer (BB)

and Nut (DD). Fix Short

Screen 1&2 (C1&C2) in

the same way.

Fig.2: Attach Long Screen

1&2 (B1&B2) and Short

Screen 1&2 (C1&C2) to

Post (A) and fix them tightly

by Bolt (AA&CC) and Flat

Washer (BB).



Fig.3: Attach Middle Beam

Connector (G) to Long

Screen 1&2 (B1&B2) and

Short Screen 1&2 (C1&C2)

and fix them tightly by Bolt

(

AA

)

and Flat Washer

(

BB

)

.

Fig.4: Attach Oblique Beam

Connector (F) to Post (A)

and fix them tightly by Bolt

(AA) and Flat Washer (BB).



Fig.5: Attach Long Mosquito

Netting Tube (E2) to Long

Screen 1&2 (B1&B2) and fix

them tightly by Bolt (AA) and

Flat Washer (BB).Fix Short

Screen 1&2 (C1&C2) in the

same way.

Fig.6: Attach Sleeve (D) on

Long Screen 1&2 (B1&B2)

and Short Screen 1&2

(C1&C2) and fix them tightly

by Bolt (AA) and Flat Washer

(BB).

Fig.2-1: Attach Stake

Sheet (A1) to Post

(A) by Bolt (AA) and

Flat Washer (BB).













Hardware Pack 2

BB Flat Washer M6 16 pcs

EE Bolt M6x35 8 pcs

DD Nut M6 8 pcs

Fig.7: Insert Long Tube (J)

and Short Tube (K) into

Corner (L).

Fig.8-2: Insert Oblique

Beam (H) into Corner

(L).



Fig.9: Fix Oblique Beam (H1)

on Oblique Beam Connector

(F) tightly by Bolt (EE), Flat

Washer (BB) and Nut (DD).

Fig.10-2:

Insert Middle

Beam (I) into Long

Tube (J) and Short

Tube (K).

Fig.11: Attach Middle Beam

Tube (I1) to Middle Beam

Connector (G) and fix them

tightly by Bolt (EE), Flat

Washer (BB) and Nut (DD).



Fig.12: Insert Small Top

Oblique Beam (M) into

Top Beam (O)



Fig.10-1: Insert Middle

Beam Tube (I1) into

Middle Beam (I).



Fig.8-1: Attach Oblique

Beam Tube (H1) to

Oblique Beam (H).

















Fig.13: Screw Hook (N)

on Top Beam (O).

Fig.14: Put Big Canopy (Q) on

the big top, but do not expand

it. Insert Small Top Oblique

Beam (M) into Corner (L).



Fig.15: Put Small Canopy (P)

on the small top and clasp

the four corners of Small Top

Oblique Beam (M).



HardwarePack3

GG Loop 52 PCS

FF

Stake ￠8x180

16 PCS



Fig.16: Expand the Big Canopy

(Q) and clasp the four corners

of Oblique Beam Tube (H1).

Then secure the inner valance

by Velcro.

Fig.17: Hang Mosquito Netting

(R) on Short Mosquito Netting

Tube (E1) and Long Mosquito

Netting Tube (E2) by Loop (GG).



Fig.18: Secure the gazebo

on the ground by Stake (FF).

Back up hardware pack

AA Bolt M6x20 8 pcs

BB Flat Washer M6 12 pcs

CC Bolt M6x35 4 pcs

DD Nut M6 4 pcs

EE Bolt M6x35 2 pcs

GG Loop 20 pcs

Care & Maintenance

Before using, clean the gazebo completely with a soft dry towel. When not in use, wipe free of any

dirt or loose objects, wash with a mild solution of soap and water; rinse thoroughly and dry

completely. Do not use strong detergent or abrasive cleaners.

Steel components of garden accessories and furniture are treated with rust inhibiting paint.

However, due to the nature of steel, surface oxidation (rusting) will occur if this protective coating

is scratched.

To minimize this condition, it is recommended that care be taken when assembling and handling

the product, in order to prevent the paint from being scratched.

Limited Manufacturer’s Warranty:

This product carries a 1 year warranty against defects in workmanship and materials. We agree to

replace the defective product free of charge within the stated warranty period, when returned by

the original purchaser with proof of purchase. This product is not guaranteed against wear or

breakage due to misuse and/or abuse.

Exclusions:

Items used for commercial, contract, or other non-residential purposes, or items damaged due

to acts of nature, vandalism, misuse, or improper assembly are not covered. Corrosion or

rusting of hardware is not covered. Proof of purchase (dated register receipt) is required for

warranty claims. Warranty is to the original purchaser and is non-transferable. Any

replacement of warranted items will be in the original style and color, or a similar style and

color if the original is unavailable or has been discontinued. As some states do not allow

exclusions or limitations on an implied warranty, the above exclusions and limitations may not

apply. This warranty gives you specific rights, and you may also have other rights, which vary

from state to state.

Member's Mark Revella L-GZ806PST-A2 Step-By-Step Instructions

Member's Mark Revella L-GZ806PST-A2 Step-By-Step Instructions

Other documents