Mod Podge 12918 Installation guide

Brand: Mod Podge

Model: 12918

Type: Installation guide

Paris Necklace

By Cathie Filian & Steve Piacenza

Supplies

 Mod Podge ® Acrylic Shapes

 Mod Podge ® Hard Coat

 Mod Podge ® Podgeable Paper Flip Books -

Travel

 Pencil

 Scissors

 Gem glue

 Rhinestones

 Jump-ring

 Jewelry Pliers

 Necklace

Instructions

Please read and follow all manufacturers’ instructions for all tools and materials used. Provide adult supervision if children participate in this

project.

Disclaimer: The information found in each project is presented in good faith, but no warranty is given, nor results guaranteed, nor is freedom

from any patent to be inferred. Since we have no control over physical conditions surrounding the application of information herein contained,

Plaid Enterprises, Inc.disclaims any liability for untoward results.

Beginner Skill Level | 1 Hour Crafting Time

1. Begin with a large rectangle Podgeable. Trim the Paris poster image from the Travel

paper to fit the Podgeable shape.

2. Apply a thin coat of Mod Podge to the bottom of the Podgeable shape and to the top

of the Paris image. Position the image on the back of the shape. Smooth with your

fingers. Apply a top-coat of Mod Podge to the back of the paper.

3. Using gem glue, attach rhinestones to the design. Allow to dry for 2 hours.

4. Attach to a necklace with a jump-ring.

PROJECT TIP: Podgeable shapes are great for making key chains and tags.

1

Mod Podge 12918 Installation guide

Brand: Mod Podge

Model: 12918

Type: Installation guide

Related papers

Other documents