ADTRAN DSU 56/64 User manual

ADTRAN
Brand
ADTRAN
Model
DSU 56/64
Type
User manual

This manual is also suitable for

DSU 56/64 DATA SERVICE UNIT P/N 1200062L1
For more detailed documentation, visit us online at www.adtran.com
Quick Start Guide, 61200062L1-13A, June 2001 Technical Support 1-888-4ADTRAN (1-888-423-8726) Copyright 2001 ADTRAN, All Rights Reserved
I
NSTALLATION
I
NFORMATION
• The 8-pin modular jack (RJ-48S) labeled TELCO connects the DSU 56/64
to the DDS network.
• All setup or configuration parameters for the DSU 56/64 are selected with
an eight position DIP switch. This switch, labeled OPTIONS, is accessible
from the rear panel. The label also references the options chart located on
the bottom of the unit. The individual options are explained in detail in
Chapter 2 of the DSU 56/64 User Manual.
• Primary V.35, a 34-pin connector, provides the high speed synchronous
DTE interface.
• The power cord on the rear panel is mechanically secured to the back
panel and provides the connections to the integral AC/DC power supply.
• Additional specific information can be found on the product CD which
contains the DSU 56/64 User Manual, FAQs, Data Sheets, Applications,
and White Papers.
R
EAR
P
ANEL
D
ESCRIPTIONS
Telco Connector Connection to the dedicated circuit (DDS
network)
Options 8-position DIP switch which is used to select
all setup or configuration parameters
Primary V.35
Connector
High speed DTE interface
Power Cord Provides connections to the integral AC/DC
power supply
O
PTIONS
T
ABLE
(
ON
BOTTOM
OF
UNIT
)
Switch Position Function Down Up
1CS NORMALON
2 CS DELAY SHORT LONG
3 ANTI-STREAM OFF ON
4CD NORMALON
5SR ON NORMAL
6 RDL ENABLE DISABLE
7 RATE 56k 64k
8 SCRAMBLER ON OFF
  • Page 1 1

ADTRAN DSU 56/64 User manual

ADTRAN
Brand
ADTRAN
Model
DSU 56/64
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents