Universal Notebook Docking Station
iConcepts M10617-MB
User Manual
Introduction
1. Product Brief
The Universal Notebook Docking Station is your first choice for an all in one notebook
cooling/expansion solution. It can efficiently decrease the overall temperature of your notebook
and protect it from over-heating while simultaneously adding additional ports fort expansion and
convenience. The Universal Notebook Docking Station, when used, will keep your notebook cool.
This will help it to run more efficiently thereby increasing its useful life and making it run faster.
It will also provide excellent and abundant expansion by adding several ports, listed below, all
running off an available USB port. When using your notebook, please make sure that you use our
Universal Notebook Docking Station at the same time, it is worth every cent!
2. Features:
- Power source: USB 5V/DC Jack 5V
- Lightweight and easy to carry
- 9x1 memory card reader: support CF, MD, SMC, XD picture, MS, MS Pro, MS Duo,
SD, MMC
- 2X USB 2.0 ports and 1x USB 1.1 port
- 2x PS/2 port
- Two Silent Cooling Fans with on/off switch
- Two Built-in retractable speakers with on/off switch
- Audio Jack
- Environmentally Friendly Design
3. Hardware Installation
- Take out the Universal Notebook Docking Station, put it onto an even surface such as
your office desk.
- Put the Notebook onto the Docking Station gently and horizontally.
- Connect Notebook and the Docking Station with the attached USB cable and audio cable
- Turn on the power, then, the whole procedure is completed.
4. Software Installation
Plug-Play and Hot-swapping, no need for software
5. Main items
(1) Universal Notebook Docking Station
(2) Manual
(3) Plastic Bag
(4) USB Cable and audio Cable 1 each
(5) External Power Supply (* Optional)
Note: Please use qualified power supply to avoid permanent damage!
[Enclosed] Specs: +5V DC/2A
Sakar Warranty Card
This warranty covers for the original consumer purchaser only and is not transferable. Products
that fail to function properly UNDER NORMAL USAGE, due to defects in material or
workmanship. Your product will be repaired at no charge for parts or labor for a period of one
year.
What Is Not Covered by Warranty.
Damages or malfunctions not resulting from defects in material or workmanship and damages or
malfunctions from other than normal use, including but limited to, repair by unauthorized parties,
tampering, modification or accident.
What To Do When Service Is Required
When returning your defective product (postage pre-paid) for service, your package should
include:
1. Copy of original bill of sale
2. A detailed written description of the problem.
3. Your return address and telephone number (Daytime)
4. A check or money order for USD $ 5.95 payable to iConcepts to cover shipping, handling
and insurance. (Other fees may apply for shipments outside the US, please email, write or
call for exact shipping charges.)
MAIL TO ADDRESS BELOW:
Sakar International
Attention: Service Department
195 Carter Drive
Edison, NJ 08817
Tel: 732-248-1306
You may also visit www.sakar.com for further assistance if necessary or call our tech support
department toll free at (877) 397-8200
/
