Meiko SL-RL Datasheet

Meiko
Brand
Meiko
Model
SL-RL
Type
Datasheet

This manual is also suitable for

SL Side Loader • Updated 8-06 Meiko • 917 Airpark Center Drive • Nashville, TN 37217 • (800) 55-MEIKO • FAX (615) 399-6620 • www.meiko.us
20-3/8"
23"
D
D
9"
1"
Table lip-in 34" AFF
Drain connection 27-5/8" AFF
Drive connection
extends 6-1/8"
into machine
Left-to-Right
Machines
28-1/8"
Standard loader: Vent cowling
trimmed on front of machine
Hooded loader: Vent cowling
removed
Drive connection
extends 6-1/8"
into machine
Right-to-Left
Machines
Hooded
loader
only
14-1/2"
8-1/2"
1"
14-3/4"
3/4"
23-3/8"
30"
5/8"
1-5/8" 20-3/8"
23"
D
D
9"
1"
Table lip-in 34" AFF
Drain connection 27-5/8" AFF
Drive connection
extends 6-1/8"
into machine
28-1/8"
Standard loader: Vent cowling
trimmed on front of machine
Hooded loader: Vent cowling
removed
Drive connection
extends 6-1/8"
into machine
Hooded
loader
only
14-1/2"
8-1/2"
1"
14-3/4"
3/4"
23-3/8"
30"
5/8"
1-5/8"
D
Drain
Utility Connection:
See Page 2 for
connection information.
NOTE:
All dimensions
from floor are
+/- 1/2" due to
adjustable feet.
D
Drain
Utility Connection:
See Page 2 for
connection information.
NOTE:
All dimensions
from floor are
+/- 1/2" due to
adjustable feet.
Meiko’s 23” side loader accessory provides a reliable way
to make the most use of limited space in the dishroom.
Racks pushed into the front of the loader are engaged by
an extension of the dishmachine’s conveyor drive, and are
automatically advanced into the dishmachine through 90
degrees. Because the loader is powered by the Meiko rack
conveyor dishmachine, racks are automatically advanced
at the correct speed and no electrical connection is required.
The 23” side loader is available in standard or hooded
versions, and may be used with either K-Series or K-Tronic
Series rack conveyor dishmachines. Please specify the
machine type, direction and options at time of ordering.
SIDE LOADER
Standard SL-LR, SL-RL
Hooded SLH-LR, SLH-RL
RACK CONVEYOR
WAREWASHER
ACCESSORIES
SL Side Loader • Updated 8-06 Meiko • 917 Airpark Center Drive • Nashville, TN 37217 • (800) 55-MEIKO • FAX (615) 399-6620 • www.meiko.us
At time of ordering,
please specify:
Dishmachine Series
K-Series
K-Tronic Series
Loader Type
Standard (SL)
Hooded (SLH)
Direction of Operation
Left-to-Right (-LR)
Right-to-Left (-RL)
Technical Specifications:
Overall Dimensions ...................................... 23”W x 30-1/8”D
Standard Loader:
• Backsplash height............. 9” vertical + 1” at 45° (10” total)
• Overall height .................................................................. 44”
Hooded Loader:
• Overall height, standard machine ........................... 57-7/8”
• Overall height, tall-hood machine ............................ 65-7/8”
Table Lip-In Height ..................................................... 34” AFF
Drain ........................................ 1-1/4” male NPT, 27-5/8” AFF
Wall clearances ........................................ As per table design
Note: All specifications are subject to change without notice
based on Meiko’s dedicated product improvement program.
If wall backsplash is same height
as loader backsplash
If wall backsplash is lower than
loader backsplash
If wall backsplash is higher than
loader backsplash
Flashing
(weld in
place)
Plate, trim
to fit, weld
in place
Weld
seam
Flashing
(weld)
Plate, trim
to fit, weld
in place
Flashing
(weld)
20-3/8" clearance width
3/8"
Vertical
backsplash 9"
45°
section 1"
3/4"
4-1/8" 4-1/8" 4-1/8"4-1/8"2" 2"
Table 34" AFF
AA
Section A-A
Rear
backsplash
Front
rolled edge
Weld
seam
Weld
seam
For non-hooded
loaders, see inset
drawings at left for
wall flashing details
Stiffener plate
across rear
of panel seam
(weld in place)
On opposite end of machine from
loader, table width can be tapered at
either front or rear, as desired and
permitted by space restrictions.
C
L
All holes
3/8" dia.
Tabling to
include lip-in
Loader
  • Page 1 1
  • Page 2 2

Meiko SL-RL Datasheet

Meiko
Brand
Meiko
Model
SL-RL
Type
Datasheet
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents