Delfield UTS-1 Datasheet

Category
Multimedia carts & stands
Type
Datasheet

This manual is also suitable for

Delfield UTS-1 is a mobile tubular frame tray & silver cart with cylinders. It is made of 16-gauge 1.00” (2.5cm) outside diameter stainless steel tubing with (4) 4.00” (10.2cm) diameter polyolefin swivel casters (all locking), and a non-marking extruded vinyl sleeve bumper at each corner. The silverware bin is stainless steel, welded and polished, with (10) round cutouts to accept (10) plastic silverware cylinders (provided).

Delfield UTS-1 is a mobile tubular frame tray & silver cart with cylinders. It is made of 16-gauge 1.00” (2.5cm) outside diameter stainless steel tubing with (4) 4.00” (10.2cm) diameter polyolefin swivel casters (all locking), and a non-marking extruded vinyl sleeve bumper at each corner. The silverware bin is stainless steel, welded and polished, with (10) round cutouts to accept (10) plastic silverware cylinders (provided).

PROJECT
ITEM #
QUANTITY DATE
APPROVAL
The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed in U.S.A.
Short form specifications
Vertical frame shall be integrally welded 16-gauge 1.00”
(2.5cm) outside diameter stainless steel tubing, attached to
a bottom frame of similar stainless steel tubing. Unit shall
have (4) 4.00” (10.2cm) diameter polyolefin swivel casters
(all locking), and a non-marking extruded vinyl sleeve bum-
per at each corner.
Silverware bin shall be stainless steel, welded and polished,
with (10) round cutouts to accept (10) plastic silverware cyl-
inders (provided).
THE FOLLOWING APPLIES TO MODELS UTS-1 ONLY:
Shelf shall be one-piece molded fiberglass. Color of shelf
should be specified on original order.
THE FOLLOWING APPLIES TO MODELS UTS-1SS ONLY:
Shelf shall be 14-gauge stainless steel.
Optional Accessories & Modifications
Heavy-duty casters (consult factory)
Additional plastic or stainless steel silverware cylin-
ders
Stainless steel silverware cylinders in lieu of stan-
dard plastic
Model ND napkin dispensers
UTS
Mobile tublar frame tray & silver carts with cylinders
Model UTS-1
The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed in U.S.A.
MSUTS 05/02
PLAN VIEW
MODELS UTS-1, & UTS-1SS
ELEVATION VIEW
MODELS UTSP-1, & UTS-1SS
RIGHT END VIEW
MODELS UTS-1, & UTS-1SS
MODEL SHELF SHELF SHIP
NUMBER DIMENSIONS (LxD) CAPACITY (each) WEIGHT
UTS-1 34.25” x 22.37” 200lbs 120lbs
87.0cm x 56.8cm 91kg 54kg
UTS-1SS 34.25” x 22.37” 200lbs 125lbs
87.0cm x 56.8cm 91kg 57kg
UTS
Mobile tublar frame tray & silver carts with cylinders
35.25”
89.54cm
23.38”
59.39cm
46.68”
118.57cm
35.75”
90.81cm
5.00”
12.7cm
  • Page 1 1
  • Page 2 2

Delfield UTS-1 Datasheet

Category
Multimedia carts & stands
Type
Datasheet
This manual is also suitable for

Delfield UTS-1 is a mobile tubular frame tray & silver cart with cylinders. It is made of 16-gauge 1.00” (2.5cm) outside diameter stainless steel tubing with (4) 4.00” (10.2cm) diameter polyolefin swivel casters (all locking), and a non-marking extruded vinyl sleeve bumper at each corner. The silverware bin is stainless steel, welded and polished, with (10) round cutouts to accept (10) plastic silverware cylinders (provided).

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI