2. Shenzhen Sperll Optoelectronic Technology
  3. SP110E Bluetooth LED Controller

Shenzhen Sperll Optoelectronic Technology SP110E Bluetooth LED Controller User manual

  • Hello! I've analyzed the operating instructions for the SP110E LED controller. This device uses Bluetooth to control LED strips, offering features like brightness adjustment, 120 patterns, and the ability to control up to 1024 pixels. It works with DC5V to 12V power supplies. I'm ready to answer your questions about its use and specifications.
  • What is the working voltage of the LED controller?
    How many pixels can the controller support?
    What is the maximum remote control distance?
SP110E Bluetooth LED controller operating instructions
1. Features:
1. App Control via Bluetooth 4.0, long Control distance,convenient to use;
2. Support almost every kind of one-wire or two-wire LED driver IC ;
3. Brightness adjustable,With 120 kinds of patterns,which are vivid and beautiful;
4. Support setting total pixel number,able to control up to 1024 pixels;
5. DC5V~12V wide working voltage,preventing reverse connection of power supply;
6. User setting saving;
2. App:
Both IOS version and Android OS version are available.
•Requires IOS version 10.0 or later;
•Requires Android OS version 4.4 or later;
•Search”LEDHue”in App Store or Google pay or scan this QR code to download and install the App:
3. Specifications:
Working temperature : -20℃~60℃;
Working Voltage : DC5V~12V;
Working Current : 20mA~40mA;
Remote distance : 20 Meters;
Product size : 50mm*20mm*10mm;
Product weight : 20g ;
Certificates : CE, RoHS;
4.Wire Connection：
FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator and your body.
/