2. BOULT AUDIO
  3. ZCHARGE

BOULT AUDIO ZCHARGE User manual

  • Hello! I am an AI chatbot trained to assist you with the BOULT AUDIO ZCHARGE User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
ZCHARGE
USER MANUAL
Product Introduction
Earbud
MFB
Volume+
Next Song
Indicator
Light
USB Charge Port
Volume
Previous Song
Press and hold 5s
Under power-off status, press and hold the MFB until the indicator light
eshes red and blue alternatively, then the Headset enters the
pairing mode.
NOTE: The headset will power off
automatically 3 minutes without
connection.
PAIRING STEPS
Turn on Bluetooth on your mobile, and the Model No. of the Headset, and
connect. Turn off Bluetooth of the mobile, and repeat the step above to
connect with the second mobile.
IMPORTANT FEATURES
Power on\off
Power on:- Press and hold the multifunction (MFB) for 3s until
the BLUE light ashes.
Power off:- Press and hold the (MFB) for 5s till the RED light on for 2s.
Call answer:- answer by your phone or press the MFB.
Call answer
Call End
Call End:- End by your phone or press the MFB.
Press
Call Reject
Call Reject:- Reject by your phone or press and hold the MFB for 2s.
Last Number Redial
Quickly tap the MFB twice to redial the last dialed phone number.
Press
Press
Play Music
Play Music:- Press the MFB to play/pause music under music playing status.
Track Control
Track control:- Press and hold the “Volume+” button for 3s to skip to the
next song. Press and hold the “Volume-” button for 3s to play
the previous song.
Volume Adjust
Volume adjust- Tap the “Volume+” or “Volume-” button to increase or
decrease the volume.
ŸYou will hear “low battery” when the Headset is in low power status.
ŸYou will hear “connected” when the Headset is paired.
Ÿyou will hear ‘’power off” when the Headset is powered off.
Ÿyou will hear ‘’power on” when the Headset is power on.
ŸDon’t clean the Headset with chemical solvent.
ŸUse a USB charger of DC5V to charge the Headset if necessary.
ŸUse and keep the Headset under ambient temperatures.
ŸDon’t disassemble, repair or alter the Headset.
ŸDon’t discard the Headset at random, or put it into re or high
temperature environment (60/140) in case of danger.
Ÿdon’t throw it in case product damage caused.
ŸUSB charging cable x 1pc
ŸInstructions x 1pc
ŸEarbuds x 3pcs
Voice Prompt
Warning:
Accessories:
/