Lowell SMQ-10 User guide

Brand: Lowell

Model: SMQ-10

Type: User guide

Lowell SMQ-10 cable managers provide a quick and easy way to stabilize and secure medium to large cable bundles in your Lowell two-post or four-post racks. Made from heavy-duty nylon plastic, these cable managers can be installed without any tools. Simply insert the square base into a matching rack hole and give it a quarter-turn (left or right) to secure it in place for a vertical or horizontal cable run.

Lowell strives to provide accurate information while reserving the right to change specications and/or improve manufacturing methods without prior notication.

Spec 2345

Model CMQ-10 | Rev. 2-09-22 | pg. 1/2

Quick-install cable managers are designed to stabilize and secure medium to large

cable bundles in Lowell two-post (CR2 and NR2 Series) and four-post (NR4 Series)

racks. The plastic square fits in a matching rack hole and with just a quarter-turn (left

or right) it’s positioned to secure vertical or horizontal cable runs. Pack of 10.

FEATURES

• Construction: Heavy-duty molded nylon plastic

• Dimensions: 4.71"H x 2.88"W x 1.26"D

• Opening: 3.8" x 2.6"

• Hardware: None required

• Quantity: 10 pack

• Origin: Made in the USA

A&E SPECIFICATIONS:

The quick-install cable managers shall be Lowell Model CMQ-10, and shall be formed

from heavy-duty nylon plastic to stabilize and secure medium to large cable bundles.

One shall measure 4.71"H x 2.88"W with an overall cable opening of 3.8"H x 2.6"W.

Pack of 10.

INSTALLATION:

Insert the plastic square base into a matching rack hole and give a quarter-turn (left

or right) to secure in place for a vertical or horizontal cable run. No tools necessary.

Cable Manager for 2 or 4 Post Racks: CMQ-10

MADE IN

THE U.S.A

MODEL SUMMARY

Model No. Description Overall Dimensions Opening Dimensions

CMQ-10 Quick-install cable managers for Lowell 2 or 4 post racks, 10 pk. 4.71 x 2.88 x 1.26 3.8 x 2.6

Rack dimensions (rounded) – inches; 1U = 1.75"

Quarter-turn (right or left) to secure in place. Insert square base into matching rack hole.

Lowell strives to provide accurate information while reserving the right to change specications and/or improve manufacturing methods without prior notication.

Spec 2345

Model CMQ-10 | Rev. 2-09-22 | pg. 2/2

TOP

BOTTOM

SIDE

FRONT/REAR

Dimensions are inches and [mm] unless stated otherwise.

TECHNICAL DRAWINGS