CB84-SGVPA

Lowell CB84-SGVPA Operating instructions

  • I have reviewed the datasheet for the Lowell CB84-SGVPA surface-mount enclosure. This document details the specifications and features of the enclosure, which is designed for indoor installation of an 8" speaker and compatible screw-mount grille. It also provides information about the construction, dimensions and mounting options. I am ready to answer any questions you may have.
  • What size speaker is this enclosure designed for?
    What type of grille is compatible with this enclosure?
    Is this enclosure suitable for outdoor use?
Lowell strives to provide accurate information while reserving the right to change specications and/or improve manufacturing methods without prior notication.
©2021 Lowell Manufacturing Co., 100 Integram Dr., Pacic MO 63069 / tel. 800.325.9660 / www.lowellmfg.com
Spec 2290
Model
CB84-SGVPA
Rev. 05-13-21 | pg. 1/2
Surface-mount steel enclosure for ceiling or wall installation is designed to screw-
mount Lowell grille (model SG-8VP) with an 8" speaker in vandal-prone areas or
where tampering is a concern (indoor applications).
FEATURES:
Construction: 16-gauge certified U.S. steel with welded seams and white powder
epoxy finish. For indoor use.
Length x Width: 11.5" x 11.5"
Depth: 4"D
Volume: 0.306 cu.ft.
Acoustic Treatment: 1" thick acoustic batting (yellow fiberglass)
Installation & Knockouts:
Rear hole (0.875" dia.) for 1/2" conduit
Universal mounting pattern in rear for installation to 4"square, 4"octagon,
1-gang or 2-gang electrical box (not included).
Front formed flanges with U-clips will accept a screw-mount grille.
Country of Origin: Made in U.S.A.
A&E Specications: The vandal-resistant surface-mount enclosure for indoor
installation of an 8" speaker shall be Lowell model CB84-SGVPA, which shall be
fabricated U.S. steel with white powder epoxy finish measuring 11.5" square x
4"D. It shall feature a rear hole (.875 dia.) for 1/2" conduit or wire access and
provisions to mount to an electrical box (4" square, 4" octagon, 1-gang or 2-gang
– not included). It shall also feature four mounting holes and 8-32 U-clips at
flanged corners to accept the specified screw-mount grille. The enclosure shall
include 1" thick acoustic batting.
COMPATIBLE COMPONENTS (order separately):
• Speakers: 8" EIA. Note: Robust 8" coaxial speakers, such as Lowell model 8A50
or 8P100, require an enclosure with greater volume and depth (more than 4").
• Grille (screw-mount): SG-8VP
Surface-Mount Enclosure: CB84-SGVPA
INSTALLATION: Surface-mount
FOR SPEAKER SIZE: 8" EIA
FOR GRILLE TYPE: Screw-mount
Rear view
Lowell strives to provide accurate information while reserving the right to change specications and/or improve manufacturing methods without prior notication.
©2021 Lowell Manufacturing Co., 100 Integram Dr., Pacic MO 63069 / tel. 800.325.9660 / www.lowellmfg.com
Spec 2290
Model
CB84-SGVPA
Rev. 05-13-21 | pg. 2/2
8-32 U-clip
(4 locations)
1/2