Legrand Wattstopper HBEM3 Owner's manual

Wattstopper HBEM3

Brand: Legrand

Model: Wattstopper HBEM3

Type: Owner's manual

Legrand Wattstopper HBEM3 is an adjustable snap-on extender module that easily attaches a High Bay (HB) Occupancy Sensor Module to the side or back of a fixture, ensuring an unobstructed view for the sensor. It includes two snap-in chase nipples for secure connection to metal or plastic fixtures, accommodating fixture walls up to 1mm (0.04”) thick without the need for an internal nut. With a maximum extension of 4.75” (120mm), the HBEM3 allows for precise positioning of the sensor to optimize its field of view.

Legrand Wattstopper HBEM3 is an adjustable snap-on extender module that easily attaches a High Bay (HB) Occupancy Sensor Module to the side or back of a fixture, ensuring an unobstructed view for the sensor. It includes two snap-in chase nipples for secure connection to metal or plastic fixtures, accommodating fixture walls up to 1mm (0.04”) thick without the need for an internal nut. With a maximum extension of 4.75” (120mm), the HBEM3 allows for precise positioning of the sensor to optimize its field of view.

WWW.LEGRAND.US/WATTSTOPPER

1

WATTSTOPPER®

HIGH BAY EXTENDER MODULE

HBEM3 AND HBEM3W

DESCRIPTION

The HBEM3 Extender Module attaches a High Bay (HB)

Occupancy Sensor Module to the side of a fixture. With the

extender module attached, the HB sensor can be adjusted up

or down to ensure its view is not blocked by the fixture.

MOUNTING

CONNECTIONS

The HBEM3 includes two chase nipples. The short end of

the chase nipples snap into the HBEM3 or other plastic

connection box. The long end of the longer chase nipple fits

into a metal fixture with a standard knockout. If the fixture wall

does not exceed 1mm (0.04”) in thickness, the nipple snaps

into the knockout securely and the internal nut (included) is

not necessary. The included nut should always be used if the

fixture wall is thicker than 0.04” (1mm).

Adjustable snap-on

extender module

Snap-on chase nipples facilitate easy

side or back-mount installations

SPECIFICATIONS

• Connects to metal or plastic fixtures via included snap-in

chase nipples

• Snaps together to protect sensor and fixture wires

• Maximum Extension: 4.75” (120mm)

• Inner Diameter: 0.63” (16mm)

• Threaded Outside Diameter: 0.82” (20mm)

• Overall Length:

0.88” for connection to plastic fixture

1.24” for connection to metal fixtures

Side of fixture

HBEM3

Extender Module

HBNB3 Box

HB350 Sensor Module

Lens below edge of fixture

O

P

E

N

C

L

O

S

E

Bottom edge

of fixture

Rear

mounting

hole

Illustration shows standard

model only, not wet location

model.

Catalog # Color Description

HBEM3 White Extender module with 2 chase nipples and nuts: one short (0.88”) for connection to plastic, one long (1.24”) for

connection to metal and one plastic knockout cap

HBEM3W White Extender module or wet locations with 2 chase nipples and nuts: one short (0.88”) for connection to plastic, one long

(1.24”) for connection to metal and one plastic knockout cap

31639r1 Rev 09/2021

ORDERING INFORMATION

Please note: When preparing P.O., order parts as separate line items (e.g., HB3xx, HBL1, HBEM3) Parts ship separately.

BAA/TAA compliant

1

Legrand Wattstopper HBEM3 Owner's manual

Wattstopper HBEM3

Brand: Legrand

Model: Wattstopper HBEM3

Type: Owner's manual

Legrand Wattstopper HBEM3 is an adjustable snap-on extender module that easily attaches a High Bay (HB) Occupancy Sensor Module to the side or back of a fixture, ensuring an unobstructed view for the sensor. It includes two snap-in chase nipples for secure connection to metal or plastic fixtures, accommodating fixture walls up to 1mm (0.04”) thick without the need for an internal nut. With a maximum extension of 4.75” (120mm), the HBEM3 allows for precise positioning of the sensor to optimize its field of view.

Related papers

Other documents