2. Notifier
  3. AFP-200
AFP-200

Notifier AFP-200 User manual

  • Hello! I've reviewed the Assembly Instructions for the AFP-200 Door, Backbox, and Dress Panel Assembly. This document details the process of unpacking, assembling, and mounting the device, focusing on proper installation practices. I'm ready to answer your questions about the installation process or the specifications of the device.
  • What should I do when unpacking?
    Where should the cabinet be mounted?
    How high should the cabinet be mounted?
Document 50422 Rev A1 04/30/03 1
12 Clintonville Road, Northford, CT 06472
(203) 484-7161 Fax: (203) 484-7118
AFP-200
Door, Backbox, & Dress Panel Assembly
P/N 50422:A1 04/30/2003 ECN 02-623
Assembly
AFP-200 Door, Backbox, and
Dress Panel Assembly
Carefully unpack the door, backbox, and dress panel and check for shipping damage. The AFP-200 door, backbox, and dress
panel should be assembled as shown in the drawing below. Refer to the following page for backbox dimensions.
The cabinet should be mounted in a clean, dry, vibration-free area where extreme temperatures are not encountered. The area
should be readily accessible with sufficient room to easily install and maintain the panel. Locate the top of the cabinet
approximately five feet above the floor with the hinge mounting on the left. For more information on installation of the AFP-
200, refer to the AFP-200 Analog Fire Panel Instruction Manual, Notifier Document 15511.
Backbox
Door
Dress Panel
www.PDF-Zoo.com
firealarmresources.com
2Document 50422 Rev A1 04/30/03
AFP-200 Backbox Mounting Dimensions
12.50in. (31.75 cm.)
9.00 in.
(22.86 cm.)
1.00 in.
(2.54 cm.)
0.250 in. Ø (0.635 cm.)
14.50 in. (36.83 cm.)
16.00 in.
(40.64 cm.)
0.500 in.
(1.270 cm.)
0.250in.
(0.635 cm.)
0.500 in.
(1.270 cm.)
1.00 in.
(2.54 cm.)
www.PDF-Zoo.com
firealarmresources.com
/