IQ sound IQ-8265BT User manual

Brand: IQ sound

Model: IQ-8265BT

Type: User manual

IQ sound IQ-8265BT is a versatile audio device that offers a range of features for music playback and radio listening. With Bluetooth connectivity, you can wirelessly stream music from your smartphone or tablet. It also supports AUX input for connecting external audio sources like MP3 players. Additionally, it has a built-in FM radio for tuning into your favorite stations. The device is equipped with a USB port and a TF card slot, allowing you to play music directly from compatible storage devices.

Press and stop playing music, then

press play to return to the first song.

Volume down

Volume up

Previous song/channel Next track/channel

Play / Pause

Switch mode:BT/ AUX/ FM/ USB/ TF

ON/OFF

Silent Mode

Single cycle

Music orders in

USB disk or TF card

Sound effects choices:POP,

CLASSIC, ROCK, JAZZ, NORMAL

60Hz-13KHz

4500

Approx. 4~6 Hrs

Approx. 3~4 Hrs(50% of the volume)

xxx

260 x 215 x 453 mm

IQ- 8265BT

Put 2 x AAA batteries (not included) into the remote control (included in the package).

TIP: Ensure to operate directly in front of speaker display to make it work more efficiently.

IQ- 8265BT

Requires: 2 X AAA batteries (NOT INCLUDED)

To insert batteries, slide open the battery compartment. Insert 2 X AAA batteries (not included) into

the compartment making sure the polarity (+/-) is as indicated. Replace the battery cover ensuring it is

securely fastened.

Short press the “LED MODE” button to change light mode.

“MODE”(9)

down

Press the “MODE”(9) button to switch AUX mode and begin to play the music in the device.

Tips: USB Drive: Ver.2.0, Capacity 32GB, File format type:MP3,WAV

Tips: Micro SD / TF Card Capacity: 32GB, File format type:MP3,WAV

not

BATTERY INFORMATION

Model No.:IQ-8265BT

/ M.VOL+

/ M.VOL-

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could

void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates uses and can radiate

radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with minimum distance 20cm between the radiator &

your body.

IQ sound IQ-8265BT User manual

IQ sound IQ-8265BT User manual

IQ sound IQ-8265BT User manual

Related papers

Other documents