Salus FC600 User guide

FC600
Salus
Brand
Salus
Model
FC600
Category
Thermostats
Type
User guide

Below you will find brief information for FC600. The SALUS FC600 is a fan coil thermostat suitable for controlling your fan coil unit in both 2 pipe and 4 pipe systems, managing temperature in your home or workspace. It can be used with the SALUS Universal Gateway and Smart Home App for online mode or as a standalone device in offline mode. The thermostat has several modes including heat/cool/eco selection and features a programmable schedule, temporary/permanent overrides, and fan speed control. It also displays various information such as temperature, time, and operating modes.

Below you will find brief information for FC600. The SALUS FC600 is a fan coil thermostat suitable for controlling your fan coil unit in both 2 pipe and 4 pipe systems, managing temperature in your home or workspace. It can be used with the SALUS Universal Gateway and Smart Home App for online mode or as a standalone device in offline mode. The thermostat has several modes including heat/cool/eco selection and features a programmable schedule, temporary/permanent overrides, and fan speed control. It also displays various information such as temperature, time, and operating modes.

M
M
M
2
Introduction
A SALUS FC600 is a device suitable for controlling your fan coil unit in both
2 pipe and 4 pipe systems and for managing the temperature in your
home and/or working environment. For an internet connection (Online
Mode), this product must be used with the SALUS Universal Gateway
(UG600/UGE600) and the SALUS Smart Home App . You can also use
the SALUS FC600 without an internet connection (Oine Mode). Go to
www.salus-smarthome.com for the full PDF version of the manual.
Product Compliance
This product complies with the essential requirements and other relevant
provisions of Directives 2014/30/EU, 2014/35/EU, 2014/53/EU and 2011/65/
EU. The full text of the EU Declaration of Conformity is available at the
following internet address: www.saluslegal.com.
Safety Information
Use in accordance with the regulations.
Indoor use only.
Keep your equipment completely dry.
Disconnect your equipment before cleaning it with a dry towel.
Installation
Terminal Name Function
L 230VAC Live input
N 230VAC Neutral input
V1 4 pipe: for Hot Water valve output
2 pipe: for Heating or Cooling
V2 4 pipe: for Chilled water valve output
2 pipe: no need to wire the V2 output
F1 Fan Speed control (Low level)
F2 Fan Speed control (Medium level)
F3 Fan Speed control (High level)
S1 Heat/Cool changeover or pipe sensor
S2 Occupancy sensor or external sensor
COM Common Terminal
Wiring Option 1
2 Pipe 4 Pipe
Wiring Option 2
S1, S2 have no connection to external sensors or switches
S1, S2 are connected to external sensors or swithes
V1: Heating or Cooling Valve
V2: Not Available
V1: Heating or Cooling Valve
V2: Not Available
V1: Heating Valve
V2: Cooling Valve
V1: Heating Valve
V2: Cooling Valve
LCD Icon description
LCD Icon description
Getting Started
1. With UG600 / UGE600 and internet connection for
wiring options 1 and 2
1 2 3 4 5 6
13
1718 16 15 14
725
24
23
22
21
20
19
12
10
11
9
8
1. Auto heat/cool selection
2. Schedule icon
3. Permanent/temporary override
4. Fan is running(icon is animated)
5. Fan speed (low, medium, high, Auto, OFF)
6. Wireless communication with the Universal Gateway
7. FC600 is connected to the Universal Gateway and Internet
8. Temperature unit
9. Heating Mode ON
10. Cooling Mode ON
11. Standby mode
12. Occupancy/vacancy sensor
13. Lock function
14. AM/PM
15. Eco Mode
16. Current day of the program
17. Filter needs to be replaced
18. Current time
19. Sensor indicators
20. Timer icon
21. Program number
22. Sensor indicators
23. Sensor indicators
24. Room/setpoint temperature
25. Setpoint temperature indicator
Button Functions
Digital
Programmable
Short press Long press(2 sec)
Increase Button
FunctionKey
Decrease Button
Mode
button
Fan Speed Low, Medium, High, Auto, O
Short press: Conrm function
Long press (2 sec): Activate/deactivate standby mode.
Heat/Cool/Eco
selection
Oset, Time
Permanent override
AUTO
Heat/Cool/Eco
selection
Programming
schedule
Oset
Time&Date
Quick Guide
Fan Coil thermostat
Model: FC600
FUSE
FAN
230V AC
FUSE
FAN
230V AC
M
M
M
FUSE
FAN
230V AC
FUSE
FAN
230V AC
M
M
M
T
T
T
T
FUSE
FAN
230V AC
FUSE
FAN
230V AC
M
M
M
FUSE
FAN
230V AC
FUSE
FAN
230V AC
M
M
M
T
T
T
T
FUSE
FAN
230V AC
FUSE
FAN
230V AC
M
M
M
FUSE
FAN
230V AC
FUSE
FAN
230V AC
M
M
M
T
T
T
T
FUSE
FAN
230V AC
FUSE
FAN
230V AC
M
M
M
FUSE
FAN
230V AC
FUSE
FAN
230V AC
M
M
M
T
T
T
T
Schedule
Mode
Temporary
Override
Permanent
Override
Make sure that your Universal
Gateway is installed and added
to the app. The LED must be blue.
3
45
7
6
8 9
10
3
Success!
Installation completed.
(Standby Mode)
3
2 Sec
Set up your device on the App
If you want to turn the FC600
on press or switch it on
via the App.
2 Pipe 4 Pipe
M
1
M
9
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
S1 noFn No function
S1 HCCO Heat/cool change over
S1 Auto Auto heat cool changeover
S2 nofn No function
S2 door Occupancy sensor
S2 sens External temperature sensor
Note: If you are using Wiring Option 1 please follow steps 5-12 below.
If you are using Wiring Option 2 then please select the relevant settings
for S1 and S2 from the table below.
1 2
3 4
10
11 12
8
Press UP/DOWN to
select 2 or 4 pipe.
You are now in Standby Mode.
65
Getting Started
Changing from Oine Mode to Online Mode
Temporary Override
1. Without the UG600 / UGE600 and internet connection for wiring
options 1 and 2
If you want to use the internet App and the Universal Gateway, you need
to change your thermostat settings from Oine Mode to Online Mode.
For that please follow the steps below:
If you have made an error or need to change your system parameters,
or want to return to the factory settings, please follow steps below.
By performing this action you will lose all your settings.
Press UP/DOWN to select the
operating mode. It can be ,
or .Press to conrm your
choice.
Success!
Installation completed.
3
Installer Settings
Factory Reset
2
4
7
9
6
Press from the App and follow the on
screen instructions.
You’re now in Standby Mode.
Set up your device on the App.
7 8
4
Note: To view the full list of parameters, please consult the full manual at
www.salus-manuals.com
2
Note: The temporary
override will be active
until the next program
starts. You can cancel the
temporary Override by
pressing .
5
2
4
6
8
2 Sec
2 Sec
2 Sec
2 Sec
M
M
M
M
M
M
MM
1
5
M
M
M
2 Sec
2 Sec
2 Sec
21
M
3
1
3
M
1
2 Sec
2 Sec
2 Sec
5
7
3
4
3
  • Page 1 1
  • Page 2 2

Salus FC600 User guide

FC600
Salus
Brand
Salus
Model
FC600
Category
Thermostats
Type
User guide

Below you will find brief information for FC600. The SALUS FC600 is a fan coil thermostat suitable for controlling your fan coil unit in both 2 pipe and 4 pipe systems, managing temperature in your home or workspace. It can be used with the SALUS Universal Gateway and Smart Home App for online mode or as a standalone device in offline mode. The thermostat has several modes including heat/cool/eco selection and features a programmable schedule, temporary/permanent overrides, and fan speed control. It also displays various information such as temperature, time, and operating modes.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents