USER MANUAL OF SKMEI MODEL 1362
2018-04-16 Model:1362 Page: 2/ 2 Edition : A
Daily alarm and snooze alarm ( ) off /on: At alarm mode, press C key to turn on/off alarm, will
display ( ) or snooze( ) ,when alarm is ringing, ( ) will flash once it reaches setting
time, and will stop automatically after 10 s , when alarm is ring , press any key to stop.
Daily alarm and daytime alarms settings: At alarm mode, press Ckey 2s into alarm time setting mode,
press Dkey to adjust flashing character "plus" operation, press B key to select items, press C key to
confirm setting. If set date in alarm setting mode, the alarm is for that date, without date is daily alarm.
Hourly chime off /on: At alarm mode, press Dkey, and "Hour" disappeared ,then press Ckey to turn
on/off ( ) hourly chime.
Snooze mode:When snooze mode is on, alarm will ring every 5 minutes, without any operation, will
Last 10s.
4. Chronograph Mode
Press D key to start/stop running, when stop, press C key to zero.
Midway time: At chronograph mode, press D key to start, press C key to measure midway time, the
display changes from “ST” to “SPL”, press C again to release the midway time. In this state, press D key
to stop. In stop state, press C key to zero.
Two player time: At chronograph mode, press D key to start. In this state, press C key to display the
time of first player, press D key again to stop second player's test. At this time, press C key to view
the time for the second player, and then press C key to zero.
5. Dual Time Mode
Dual Time setting
In dual time mode , press and hold C key for 2s to select " Hour " setting, press B key to select " Minute
" setting, press B key to adjust the flashing item, press C key again to finish setting ,and return to dual
time displaying mode . Can’t set seconds of dual time mode, it is Synchronize to Normal time Mode.
6. Timer Mode
Timer time setting : Press and hold C key for 2s to time setting mode and "Hour" is flashing, press B key
to select "Hour" or "Minute" setting ,press D key to adjust the flashing item, press C key to complete
setting.
Timer operation: Press D key to start/stop counting, press C key to starting value when stop counting.
Note: when watch in setting mode of each function , the character in adjustment is in flashing.
C. Specification
Operational Temperature Range
Operational Voltage
Accuracy
Battery Code
Static Maximum Current
Static Average Current
Alarm Average Current
EL lighten Average Current
Battery Life (85%) :24 month
(Battery life calculate according to EL lighten 3 time each day for 1.5s each time , alarm for 20s each day)
:-0℃~+50℃
:3.0V
:±60sec/month
:CR2032
:≤3.5 u A(T=25℃)
:≤2.5 u A(T=25℃)
:≤2.5 m A
:≤10 m A
(Japan Battery)