2. TrickleStar
  3. Plug in

TrickleStar Plug in User guide

  • Hello! I've reviewed the instructions for the TrickleStar 891EM-US-W Energy Monitor. This document outlines how to set up and use the device, which shows readings for energy, cost, and carbon emissions. I see you can adjust the default electricity and carbon emission rates. I'm ready to answer your questions about the device based on this manual.
  • What is the default electricity rate?
    How can I adjust the electricity rate?
    What is the default carbon emission rate?
    How can I adjust the carbon emission rate?
    How do I exit the setup page?
3 4
5 6
1. The default rate is $0.12 per KWH. Press (COST)
or (ENERGY) to adjust the electricity rate.
2. Press (CO²) to conrm and exit the setup page.
7 8
1. The default carbon emission rate is 0.49Kg per KWH.
Press (COST) or (ENERGY) to adjust the
electricity rate.
2. Press (CO² button) to conrm and exit the setup
page.
9 10
11 12
13 14
/