DoorKing ProxPlus Installation guide

DoorKing
Brand
DoorKing
Model
ProxPlus
Category
Security device components
Type
Installation guide

DoorKing ProxPlus is a secure card reader that uses an encrypted unique identifier code, making it almost impossible to duplicate cards. It is vandal-resistant and is ideal for both indoor and outdoor applications. The reader has a read range of up to 1 inch (2.5 cm) and can be mounted on a variety of surfaces. It is also compatible with a variety of card types, including Mifare Classic 4 or 7 byte UID cards.

Some possible use cases for the DoorKing ProxPlus include:

  • Access control for buildings and other secure areas
  • Time and attendance tracking
  • Cashless vending
  • Loyalty programs

The reader's vandal-resistant construction and weatherproof design make it ideal for use in a variety of environments, including:

DoorKing ProxPlus is a secure card reader that uses an encrypted unique identifier code, making it almost impossible to duplicate cards. It is vandal-resistant and is ideal for both indoor and outdoor applications. The reader has a read range of up to 1 inch (2.5 cm) and can be mounted on a variety of surfaces. It is also compatible with a variety of card types, including Mifare Classic 4 or 7 byte UID cards.

Some possible use cases for the DoorKing ProxPlus include:

  • Access control for buildings and other secure areas
  • Time and attendance tracking
  • Cashless vending
  • Loyalty programs

The reader's vandal-resistant construction and weatherproof design make it ideal for use in a variety of environments, including:

ProxPlusTM SECURE CARD READERS
ProxPlusTM Secure card readers and cards use an encrypted unique identifier code making duplication of cards
almost impossible. ProxPlusTM Secure card readers will only operate with ProxPlusTM Secure cards. Mifare card
readers will operate with Mifare Classic 4 or 7 byte UID cards. The readers are sealed in epoxy, making them
vandal-resistant and are ideal for both indoor and outdoor applications.
Mount the card reader using the hardware provided as shown in the diagrams below. Mount the spacer first, then mount the card reader. Read range will be reduced
if the reader is installed on metal surfaces. Read range can also be affected by RF interference from power supplies, electrical and electronic equipment, some
types of lighting, computers and monitors, motors and generators.
DO NOT mount the card reader to a moving gate, or immediately next to a gate panel or pedestrian gate. Continuous vibration from slamming gates and vibration can
cause damage to the system over time. WARNING! If the card reader is used to activate a vehicular gate operator, it must be mounted a minimum of 6 feet away
from the gate and gate operator, or in such a way that the user cannot come into contact with the gate or gate operator while using the card reader.
Holes can be drilled in the
spacer to directly connect to
the single-gang box if desired.
12 VDC power must be available at the card reader (long cable runs
have a voltage drop due to the resistance in the cable). A larger wire
gauge (having less resistance) or a separate UL listed power supply
near the card reader may be required to ensure that 12 VDC power is
available at the card reader or problems may occur.
Electromagnetic Interference (EMI):
Shielding is used to reduce the effects of EMI.
It should be properly grounded.
Sleeve anchors to secure to surface.
Avoid mounting on metal surfaces.
Installation
Red - Vin (+12VDC)
Black - Ground
Green - Data 0
White - Data 1
Brown - LED
Blue - Beeper
Yellow - Not Used
200 mAmps
Read Range:
Up to 1 inch (2.5 cm)
Wire Descriptions
Current Draw:
Plastic Single-Gang Box
Not supplied Standard Bracket
Not supplied
Spacer
Spacer
DoorKing Part Numbers
Copyright 2022 DoorKing®, Inc. All rights reserved.
120 S. Glasgow Avenue
Inglewood, California 90301 U.S.A.
1815-684
mullion style ProxPlus Secure
1815-685
single-gang style ProxPlus Secure
1815-680
mullion style Mifare Reader
1815-681
single-gang style Mifare Reader
RED - VIN
BLACK - GND
BROWN - LED
YELLOW - W26 / W34
GREEN - Data 0
WHITE - Data 1
BLUE - BEEP
Mounting Hole
Mounting Hole
Mullion Style
Card Reader Assembly
Single-Gang Style
Card Reader Assembly
Fits under tab.
Tab
1815-666-B-3-22
  • Page 1 1

DoorKing ProxPlus Installation guide

DoorKing
Brand
DoorKing
Model
ProxPlus
Category
Security device components
Type
Installation guide

DoorKing ProxPlus is a secure card reader that uses an encrypted unique identifier code, making it almost impossible to duplicate cards. It is vandal-resistant and is ideal for both indoor and outdoor applications. The reader has a read range of up to 1 inch (2.5 cm) and can be mounted on a variety of surfaces. It is also compatible with a variety of card types, including Mifare Classic 4 or 7 byte UID cards.

Some possible use cases for the DoorKing ProxPlus include:

  • Access control for buildings and other secure areas
  • Time and attendance tracking
  • Cashless vending
  • Loyalty programs

The reader's vandal-resistant construction and weatherproof design make it ideal for use in a variety of environments, including:

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents