It is possible to play back 3D videos and 3D still pictures by connecting this unit with a 3D compatible TV.
3
4
3
12 4
VIDEO IN
AUDIO OUT
L
R
HDMI
(ARC)
HDMI
OPTICAL
OUT
SUBWOOFER
3
6 5 2 1 4 3
33
RLR L
ΩΩΩΩ
3
CENTER
SURROUND
FRONT
R6/LR6, AA
OK
RETURN
Easy setup
Would you like to start easy setup?
No
Yes
LAN cable
(not supplied)
Broadband router, etc.
Internet
Connect the cables by colour or by the numbers indicated in the illustration
to the appropriate terminals on the rear panel of the unit.
Main unit
Main unit
PURPLE GREEN RED WHITE GREY BLUE
Connect the cables
For detailed information, refer to the operating instructions.
FM indoor antenna
(supplied)
Adhesive tape
TV
Turn on the main unit
Connect the AC mains lead
Connect the AC mains lead to the
main unit before connecting to the
household mains socket.
AC mains lead (supplied)
To a household mains socket
Turn on the TV
Turn on your TV and select the appropriate video input mode
(e.g., VIDEO 1, AV 1, HDMI, etc.) to suit the connections to this
unit.
Broadband Network Connections
By connecting this unit to the network, you can optimise the
internet features of this unit.
• Use category 5 or above straight LAN cables (STP)
when connecting to peripheral devices.
• When using the wireless LAN function, the LAN cable that
connected to the main unit is not necessary.
Main unit
Press [, ] to select [Yes] and press [OK].
Other connection
Press [ ] to
turn on the
main unit.
Installing batteries in
the remote control
The Easy setup starts
The on screen display will guide you through the steps.
Turn on the main unit
Video cable*
1
(supplied only for Australia and New Zealand.)
HDMI cable (not supplied)
(Recommended for highest quality picture)
Optical digital audio cable (not supplied)
Audio cable (not supplied)
*
1
Make sure that the video cable connection is made
to view photos/videos from the iPod/iPhone.
If the HDMI terminal is labeled “HDMI (ARC)”, you can enjoy TV sound and
pictures with a single HDMI cable.
If the HDMI terminal is not labeled “HDMI (ARC)”, an “Audio cable”
or “Optical digital audio cable” is required to listen to sound from the TV.
Audio connection
For best quality audio, use the HDMI
cable (with an ARC compatible TV)
or an optical digital audio cable.
If your TV does not support the
above, use the audio cable.