Panasonic SCBTT270EP Operating instructions

Category
Home cinema systems
Type
Operating instructions

This manual is also suitable for

VQC8267
F0111SB0
1
1234
2
1
FRONT
Lch
Easy Setting Guide
The order of setting
Prepare the
speakers
See below
Place the
speakers
See below
Connect the
cables
See over
Turn on the
main unit
See over
Prepare the speakers Place the speakers
STEP 1
Label each speaker cable by attaching the
numbered sticker at the position indicated in
the illustration. Be sure to match the number
on each sticker with the circled number in the
illustration.
e.g., Front speaker Lch
WHITE speaker
Connect the speaker cables.
Insert the wire fully, taking care not to insert
beyond the wire insulation.
: White
: Blue line
PUSH!
STEP 2
White
Blue line
Refer to the rear label of the speaker before connecting the corresponding
cable.
Verify the type of speaker with the label on the rear of the speaker.
Speakers
Front speakers FRONT/AVANT
Centre speaker CENTER/CENTRE
Surround speakers SURROUND/AMBIOPHONIE
Front speakers Surround speakersCentre speakerSubwoofer
PURPLE GREEN
Lch
WHITE
Rch
RED
Lch
BLUE
Rch
GREY
Easy setup
See Easy setup screen
GREEN
C
GREY
RS
RED
R
WHITE
PURPLE
SW
L
LS
BLUE
Recommended
Front speakers
(L, R)
Surround speakers
(LS, RS)
60
120
Model No. SC-BTT270
e.g.,
Blu-ray Disc
TM
Home Theater Sound System
3
4
3
12 4
VIDEO IN
AUDIO OUT
L
R
HDMI
(ARC)
HDMI
OPTICAL
OUT
SUBWOOFER
3
6 5 2 1 4 3
33
RLR L
ΩΩΩΩ
3
CENTER
SURROUND
FRONT
Ω
75
AUX
FM ANT

R6/LR6, AA
LAN
OK
RETURN
Easy setup
Would you like to start easy setup?
No
Yes
If the HDMI terminal is labeled “HDMI (ARC)”, you can enjoy TV sound and
pictures with a single HDMI cable.
If the HDMI terminal is not labeled “HDMI (ARC)”, an “Audio cable”
or “Optical digital audio cable” is required to listen to sound from the TV.
Connect the cables by colour or by the numbers indicated in the illustration
to the appropriate terminals on the rear panel of the unit.
Main unit
Main unit
PURPLE GREEN RED WHITE GREY BLUE
Connect the cables
For detailed information, refer to the operating instructions.
Audio connection
For best quality audio, use the HDMI
cable (with an ARC compatible TV)
or an optical digital audio cable.
If your TV does not support the
above, use the audio cable.
*
1
Make sure that the video cable connection is
made to view photos/videos from the iPod/iPhone.
FM indoor antenna
(supplied)
Adhesive tape
TV
Video cable*
1
(supplied only for Australia and New Zealand.)
HDMI cable (not supplied)
(Recommended for highest quality picture)
Optical digital audio cable (not supplied)
Turn on the main unit
Connect the AC mains lead
Connect the AC mains lead to the
main unit before connecting to the
household mains socket.
To a household mains socket
Turn on the TV
Turn on your TV and select the appropriate video input mode
(e.g., VIDEO 1, AV 1, HDMI, etc.) to suit the connections to this
unit.
Broadband Network Connections
By connecting this unit to the network, you can optimise the
internet features of this unit.
Use category 5 or above straight LAN cables (STP)
when connecting to peripheral devices.
When using the wireless LAN function, the LAN cable that
connected to the main unit is not necessary.
Main unit
LAN cable
(not supplied)
Internet
Press [, ] to select [Yes] and press [OK].
Broadband router, etc.
Other connection
Audio cable (not supplied)
Press [ ] to turn
on the main unit.
Installing batteries in the
remote control
The Easy setup starts
The on screen display will guide you through the steps.
Turn on the main unit
AC mains lead (supplied)
It is possible to play back 3D videos and 3D still pictures by connecting this unit with a 3D compatible TV.
  • Page 1 1
  • Page 2 2

Panasonic SCBTT270EP Operating instructions

Category
Home cinema systems
Type
Operating instructions
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI