Reznor EGHB Installation guide

Reznor
Brand
Reznor
Model
EGHB
Type
Installation guide

Reznor EGHB

Reznor EGHB is a relay kit designed to be installed by a qualified technician. Once installed, it allows you to connect a low voltage thermostat to the control terminals of the relay, enabling you to control the temperature of your space more precisely.

Here are some of the key features and possible use cases of the Reznor EGHB Relay Kit:

  • Precise temperature control: By using a low voltage thermostat, you can set the desired temperature for your space and the relay will automatically adjust the heating or cooling system to maintain that temperature. This can help you to save energy and improve comfort.

Reznor EGHB

Reznor EGHB is a relay kit designed to be installed by a qualified technician. Once installed, it allows you to connect a low voltage thermostat to the control terminals of the relay, enabling you to control the temperature of your space more precisely.

Here are some of the key features and possible use cases of the Reznor EGHB Relay Kit:

  • Precise temperature control: By using a low voltage thermostat, you can set the desired temperature for your space and the relay will automatically adjust the heating or cooling system to maintain that temperature. This can help you to save energy and improve comfort.
INS193-200705-01
INSTALLATION :
1) Remove access control box cover of the heater.
2) Position the relay in the control box and secure it with provided screws.
3) Connect the low voltage thermostat to the control terminals of the relay.
4) Make the connection of the relay according to the wiring diagram
on the access control box cover.
5) Secure access control box cover and reconnect power supply.
6) Check relay by temporarily setting the thermostat at
maximum temperature and then, at the minimum.
Adjust the thermostat at the desired set point.
CAUTION
DISCONNECT ALL POWER SUPPLIES
BEFORE WORKING ON ANY CIRCUIT.
INSTALLATION INSTRUCTIONS
of the «EGHB» Relay Kit
Reznor LLC
O’Fallon MO USA 63368
Tel.: 1 800 695-1901
www.ReznorHVAC.com
© 2014 Reznor, LLC. All rights reserved.
All other trademarks are the property of their respective organizations.
R1
T2
T1
THE INSTALLATION MUST BE EXECUTED BY A QUALIFIED TECHNICIAN
RISK OF ELECTROCUTION
INS193-200705-01
INSTRUCTIONS D’ INSTALLATION
Trousse de relais «EGHB»
Reznor LLC
O’Fallon MO USA 63368
Tel.: 1 800 695-1901
www.ReznorHVAC.com
© 2014 Reznor, LLC. All rights reserved.
All other trademarks are the property of their respective organizations.
R1
T2
T1
ATTENTION
COUPER L’ALIMENTATION
AVANT DE MANIPULER LES CIRCUITS INTERNES
INSTALLATION :
1) Enlever le panneau d’accès aux contrôles de l’appareil.
2) Positionner le relais dans le compartiment des contrôles et fi xer à l’aide des vis
fournies.
3) Joindre le thermostat à bas voltage avec les bornes de la section contrôle du relais.
4) Effectuer la connexion du relais en se référant au diagramme de câblage
sur le panneau d’accès.
5) Replacer le panneau d’accès et rétablir l’alimentation.
6) Vérifi er le bon fonctionnement en ajustant temporairement le thermostat au
maximum puis au minimum. Ajuster le thermostat au point de consigne désiré.
L’INSTALLATION DOIT ÊTRE EXÉCUTÉE PAR UN TECHNICIEN QUALIFIÉ
RISQUE D’ÉLECTROCUTION
  • Page 1 1
  • Page 2 2

Reznor EGHB Installation guide

Reznor
Brand
Reznor
Model
EGHB
Type
Installation guide

Reznor EGHB

Reznor EGHB is a relay kit designed to be installed by a qualified technician. Once installed, it allows you to connect a low voltage thermostat to the control terminals of the relay, enabling you to control the temperature of your space more precisely.

Here are some of the key features and possible use cases of the Reznor EGHB Relay Kit:

  • Precise temperature control: By using a low voltage thermostat, you can set the desired temperature for your space and the relay will automatically adjust the heating or cooling system to maintain that temperature. This can help you to save energy and improve comfort.
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers