Symmons S-86-1-X-BODY Installation guide

Symmons
Brand
Symmons
Model
S-86-1-X-BODY
Category
Sanitary ware
Type
Installation guide

Symmons S-86-1-X-BODY is a 4-port Temptrol Shower mixing valve with integral volume control. It includes a plug installed in the tub supply output port. This valve is ideal for use in showers, as it allows you to control the temperature and volume of the water with a single handle. The integral volume control allows you to adjust the amount of water that flows through the showerhead, while the adjustable stop screw allows you to limit the maximum temperature of the water.

Symmons S-86-1-X-BODY is a 4-port Temptrol Shower mixing valve with integral volume control. It includes a plug installed in the tub supply output port. This valve is ideal for use in showers, as it allows you to control the temperature and volume of the water with a single handle. The integral volume control allows you to adjust the amount of water that flows through the showerhead, while the adjustable stop screw allows you to limit the maximum temperature of the water.

1-5/16"
(33 mm)
2-5/16"
(59 mm)
1-5/16"
(33 mm)
Hot supply
input port
Cold supply
input port
Output
port
4-5/8"
(118 mm)
(open, fully CCW)
Adjustable screw
to limit handle turn
(max temperature)
Service stop
Note: (1) Input supply ports are 1/2" sweat
Ouput ports NPS 1/2" threaded
(2) plug for tub supply port is required
for shower only valve installations
2-5/8"
(67 mm)
2X 3/4"
(19 mm)
diameter
4-11/16"
(119 mm)
1-1/4"
(32 mm)
2-7/16"
(61 mm)
3/16"
(6 mm)
11/16"
(17 mm)
Tub supply port
Diverter /
Volume control
Dimensions Temptrol Shower & Tub-Shower Valve, 4-port valve with service stops
Warranty
Limited Lifetime ■ - to the original end purchaser in
residential/consumer installations.
5 years ■ - for commercial installations
Feature Highlights
Symmons Temptrol 4-port pressure-balancing mixing valve ■
with adjustable stop screw to limit handle turn
Integral service stops to allow water shut-o for servicing ■
valve
Supply input ports 1/2 inch sweat ■
Output ports NPS readed 1/2 inch ■
Integral volume control port (S-86-1-BODY-X only) ■
Integral diverter (S-86-2-BODY-X only) ■
Model Numbers
S-86-1-BODY-X Shower Valve
4-Port Temptrol Shower mixing valve with integral
volume control. Includes plug installed in tub supply
output port.
S-86-2-BODY-X Tub-Shower Valve
4-Port Temptrol Tub-Shower mixing valve with
integral diverter.
Standards / Certifications
ASME A112.18.1-2005/CSA B125.1-05
Specification & Parts Assembly Submittal
Temptrol
®
Shower & Tub-Shower Mixing Valve
Models
S-86-1-BODY-X, S-86-2-BODY-X
Location:
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184
(800) 796-6667, (781) 848-2250
■ Fax (800) 961-9621, (781) 664-1300
Website: www.symmons.com
■ Email: cu st om er se rv ic e@ sy mm on s. co m
©2009, 2010 Symmons Industries, Inc. Printed in U.S.A.
■ 060810
Hot seat
removal tool
(T-35A)
Cold seat
removal tool
(T-35B)
5/16" wood
screw
Pull out
to remove
Service
stop
Retainer
wrench, (T-55C)
Service stop and retainer kit (T-52)
Spindle cap assy.
& control spindle
(TA-10/12)
Temptrol
Valve
S-86-1-BODY-X.......Shower only valve (v1)
S-86-2-BODY-X.......Tub Shower valve (v2)
Hot & cold seat
repair kit (TA-4)
Hot
supply
input
(v1) Volume spindle...TA-25A
(v2) Diverter spindle..TA-25B
Shower
supply
output
Cold supply input
(v1) plug inserted
(v2) Tub supply
output
Spindle cap
washer repair kit
(T-16)
Control spindle
assy. (TA-10)
Spindle cap assembly
(T-12A)
spindle cap gasket
spindle cap
limit stop screw
o-ring
washer
washer
packing nut
hot washer screw
hot washer
cold washer retainer
cold washer
spindle cap gasket
Control spindle
washer repair kit
(TA-9)
TEMP LIMIT
stop adjust
hot
seat
5/16" Allen
wrench
Retainer
cold
seat
Parts Assembly Temptrol Tub-Shower Valve, S-86-1-BODY-X / S-86-2-BODY-X
  • Page 1 1
  • Page 2 2

Symmons S-86-1-X-BODY Installation guide

Symmons
Brand
Symmons
Model
S-86-1-X-BODY
Category
Sanitary ware
Type
Installation guide

Symmons S-86-1-X-BODY is a 4-port Temptrol Shower mixing valve with integral volume control. It includes a plug installed in the tub supply output port. This valve is ideal for use in showers, as it allows you to control the temperature and volume of the water with a single handle. The integral volume control allows you to adjust the amount of water that flows through the showerhead, while the adjustable stop screw allows you to limit the maximum temperature of the water.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents